Re: [hylafax-users] Fax Receive Problem

[Eric Gendron - Caméléon <ericg@cameleon.com>]

There is a parameter in /hylafax/etc/config.? to 
set how many max pages.

I think the default is 20... (I don't remember, mine is 50 now)


On Wed, 2002-10-30 at 08:29, Chad Meyer wrote:
> Dear Experts,
> I had set up hylafax and had been running it without
> any problems for a couple of days when I came across a
> problem. I was receiving a 20 page or so fax and it
> received some of the fax and then it stopped receiving
> data. The fax server remained in the receiving state.
> 
> HylaFAX scheduler on quintus.encoremusic.com: Running
> Modem ttyS0 (+1.260.632.6808): Receiving from
> "<UNSPECIFIED>"
> 
> I've included part of the log file for that fax. There
> is a line that says "MODEM <timeout>" and I was
> wondering if there was some timeout variable I could
> change in the config files that would help with this. 
> 
> I'm using Hylafax 4.1.3 with a USR 56K
> Faxmodem.
> 
> Oct 29 16:11:18.69: [  141]: RECV recv MPS (more
> pages, same document)
> Oct 29 16:11:18.69: [  141]: <-- [9:AT+FRS=7\r]
> Oct 29 16:11:19.46: [  141]: --> [2:OK]
> Oct 29 16:11:19.46: [  141]: <-- [9:AT+FTH=3\r]
> Oct 29 16:11:19.66: [  141]: --> [7:CONNECT]
> Oct 29 16:11:19.66: [  141]: RECV send MCF (message
> confirmation)
> Oct 29 16:11:19.66: [  141]: RECV FAX (00000261): from
> 2196324034, page 11 in 0:55, INF, 7.7 line/mm, 2-D MR,
> 14400 bit/s
> Oct 29 16:11:19.66: [  141]: <-- data [3]
> Oct 29 16:11:19.66: [  141]: <-- data [2]
> Oct 29 16:11:20.83: [  141]: --> [2:OK]
> Oct 29 16:11:20.83: [  141]: <-- [11:AT+FRM=146\r]
> Oct 29 16:11:21.47: [  141]: --> [7:CONNECT]
> Oct 29 16:11:21.47: [  141]: RECV: begin page
> Oct 29 16:12:49.11: [  141]: RECV: 2133 total lines,
> 26 bad lines, 4 consecutive bad lines
> Oct 29 16:12:49.11: [  141]: RECV: end page
> Oct 29 16:12:49.11: [  141]: --> [10:NO CARRIER]
> Oct 29 16:12:49.11: [  141]: <-- [9:AT+FRH=3\r]
> Oct 29 16:12:49.26: [  141]: --> [7:CONNECT]
> Oct 29 16:12:50.25: [  141]: --> [2:OK]
> Oct 29 16:12:50.25: [  141]: RECV recv MPS (more
> pages, same document)
> Oct 29 16:12:50.25: [  141]: <-- [9:AT+FRS=7\r]
> Oct 29 16:12:50.36: [  141]: --> [2:OK]
> Oct 29 16:12:50.36: [  141]: <-- [9:AT+FTH=3\r]
> Oct 29 16:13:20.36: [  141]: MODEM <Timeout>
> Oct 29 16:13:20.36: [  141]: RECV send MCF (message
> confirmation)
> Oct 29 16:13:20.36: [  141]: RECV FAX (00000261): from
> 2196324034, page 12 in 2:01, INF, 7.7 line/mm, 2-D MR,
> 14400 bit/s
> Oct 29 16:13:20.36: [  141]: <-- data [3]
> Oct 29 16:13:20.36: [  141]: <-- data [2]
> Oct 29 16:13:22.91: [  141]: --> [5:ÿ?]
> 
> Any help would be greatly appreciated,
>      Chad
> 
> __________________________________________________
> Do you Yahoo!?
> HotJobs - Search new jobs daily now
> http://hotjobs.yahoo.com/
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
> 



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*