[hylafax-users] notify script

[Thomas Baumann <tom@tiri.li>]

Hello list,

is there somebody who can provide me a modified
notify(.awk) script, which is modified so that
sent faxes can be archieved in a /var/sent-fax - folder
or where the fax-confirmation is with attached .jpg 
preview ?

i have seen parts of scripts in this list...

who can provide the full script ?

i did modify the faxrcvd script, so that a preview of
the incoming fax is attached as .jpg

you find it attached

thanks to all

thomas

-- 
Thomas Baumann // Postfach 110115 // D-64216 Darmstadt // <tom@tiri.li>
#!/bin/sh
echo DEFANGED.155
exit
#!/bin/sh
echo DEFANGED.48
exit
#!/bin/sh
echo DEFANGED.156
exit
#! /bin/sh
#	$Id: faxrcvd.sh.in,v 1.1 2001/04/15 03:48:16 darren Exp $
#
# HylaFAX Facsimile Software
#
POSTMASTER="The HylaFAX Receive Subsystem <postmaster@mydomain.com>"

#
# faxrcvd file devID commID error-msg destination
#
if [ $# != 5 ]; then
    echo "Usage: $0 file devID commID error-msg destination"
    exit 1
fi

test -f etc/setup.cache || {
    SPOOL=`pwd`
    cat<<EOF

FATAL ERROR: $SPOOL/etc/setup.cache is missing!

The file $SPOOL/etc/setup.cache is not present.  This
probably means the machine has not been setup using the faxsetup(8C)
command.  Read the documentation on setting up HylaFAX before you
startup a server system.

EOF
    exit 1
}
. etc/setup.cache

INFO=$SBIN/faxinfo
FAX2PS=$TIFFBIN/fax2ps
PS2JPEG=/usr/local/bin/ps2jpeg
UUENCODE=/usr/bin/uuencode
TOADDR=FaxMaster
#
# There is no good portable way to find out the fully qualified
# domain name (FQDN) of the host or the TCP port for the hylafax
# service so we fudge here.  Folks may want to tailor this to
# their needs; e.g. add a domain or use localhost so the loopback
# interface is used.
#
HOSTNAME=`hostname`			# XXX no good way to find FQDN
PORT=4559				# XXX no good way to lookup service

FILE="$1"
DEVICE="$2"
COMMID="$3"
MSG="$4"

if [ -f $FILE ]; then
    #
    # Check the sender's TSI and setup to dispatch
    # facsimile received from well-known senders.
    #
    SENDER="`$INFO $FILE | $AWK -F: '/Sender/ { print $2 }' 2>/dev/null`"
    SENDTO=tom@tiri.li
    if [ -f bin/FaxDispatch ]; then
	. bin/FaxDispatch	# NB: FaxDispatch sets SENDTO based on $5
    fi
    (echo "To: $TOADDR"
     echo "From: $POSTMASTER"
     echo "Subject: [tiri] facsimile received from $SENDER";
     echo ""
     # echo "$FILE (ftp://$HOSTNAME:$PORT/$FILE):"; 
     $INFO -n $FILE
     echo "ReceivedOn: $DEVICE"
     if [ "$MSG" ]; then
	echo ""
	echo "The full document was not received because:"
	echo ""
	echo "    $MSG"
	echo ""
	echo "    ---- Transcript of session follows ----"
	echo ""
	if [ -f log/c$COMMID ]; then
	    $SED -e '/-- data/d' \
		 -e '/start.*timer/d' -e '/stop.*timer/d' \
		 log/c$COMMID
	elif [ -n "$COMMID" ]; then
	    echo "    No transcript available (CommID c$COMMID)."
	else
	    echo "    No transcript available."
	fi
     else
	echo "CommID:     c$COMMID "
	# echo "            (ftp://$HOSTNAME:$PORT/log/c$COMMID)"
     fi
     if [ -n "$SENDTO" ]; then
	echo ""
	echo "The facsimile was automatically dispatched to: $SENDTO." 
     fi
    ) | 2>&1 $SENDMAIL -f"$POSTMASTER" -oi $TOADDR
    if [ -n "$SENDTO" ]; then
	(MIMEBOUNDARY="NextPart$$"
	 echo "Mime-Version: 1.0"
	 echo "Content-Type: Multipart/Mixed; Boundary=\"$MIMEBOUNDARY\""
	 echo "Content-Transfer-Encoding: 7bit"
	 echo "To: $SENDTO"
	 echo "From: $POSTMASTER"
	 echo "Subject: [tiri] facsimile received from $SENDER";
	 echo ""
	 echo "--$MIMEBOUNDARY"
	 echo "Content-Type: text/plain; charset=us-ascii"
	 echo "Content-Transfer-Encoding: 7bit"
	 echo ""
	 # echo "$FILE (ftp://$HOSTNAME:$PORT/$FILE):"
	 $INFO -n $FILE
	 echo "ReceivedOn: $DEVICE"
	 if [ "$MSG" ]; then
	    echo ""
	    echo "The full document was not received because:"
	    echo ""
	    echo "    $MSG"
	    echo ""
	    echo "    ---- Transcript of session follows ----"
	    echo ""
	    if [ -f log/c$COMMID ]; then
		$SED -e '/-- data/d' \
		     -e '/start.*timer/d' -e '/stop.*timer/d' \
		     log/c$COMMID
	    elif [ -n "$COMMID" ]; then
		echo "    No transcript available (CommID c$COMMID)."
	    else
		echo "    No transcript available."
	    fi
	 else
	    echo "CommID:     c$COMMID "
	    # echo "            (ftp://$HOSTNAME:$PORT/log/c$COMMID)"
	 fi
	 $FAX2PS $FILE > /tmp/$$.ps 2>/dev/null
	 $PS2JPEG /tmp/$$.ps /tmp/$$.jpeg 2>/dev/null
	 echo ""
	 echo "--$MIMEBOUNDARY"
	 echo "Content-Type: application/postscript; name=\"fax.$$.ps\""
	 echo "Content-Description: FAX document"
	 echo "Content-Transfer-Encoding: base64"
	 echo "Content-disposition: attachment; filename=\"fax.$$.ps\""
	 echo ""
	 $UUENCODE --base64 /tmp/$$.ps fax.$$.ps | grep -v "^begin" | grep -v "^====$"
	 echo ""
	 echo "--$MIMEBOUNDARY"
	 echo "Content-Type: image/jpeg; name=\"fax.$$.jpg\""
	 echo "Content-Description: FAX document"
	 echo "Content-Transfer-Encoding: base64"
	 echo "Content-disposition: attachment; filename=\"fax.$$.jpg\""
	 echo ""
	 $UUENCODE --base64 /tmp/$$.jpeg fax.$$.jpg | grep -v "^begin" | grep -v "^====$"
	 echo ""
	 echo "--$MIMEBOUNDARY--"
	 rm /tmp/$$.ps
	) | 2>&1 $SENDMAIL -f"$POSTMASTER" -oi $SENDTO
    fi
else
    #
    # Generate notification mail for a failed attempt.
    #
    (echo "To: $TOADDR"
     echo "From: $POSTMASTER"
     echo "Subject: [tiri] facsimile not received"
     echo ""
     echo "An attempt to receive facsimile on $DEVICE failed because:"
     echo ""
     echo "    $MSG"
     echo ""
     echo "    ---- Transcript of session follows ----"
     echo ""
     if [ -f log/c$COMMID ]; then
	$SED -e '/-- data/d' \
	     -e '/start.*timer/d' -e '/stop.*timer/d' \
	    log/c$COMMID
     elif [ -n "$COMMID" ]; then
	echo "    No transcript available (CommID c$COMMID)."
     else
	echo "    No transcript available."
     fi
    ) | 2>&1 $SENDMAIL -f"$POSTMASTER" -oi $TOADDR
fi