Re: [hylafax-users] Hylafax doesn't know what modem to use

[Martin Szymanski <szymanski@nlcom.nl>]

I have done a clean installation of the system installint debian all over again. 
I then installed the Fritz Capi drivers wich work fine. I apt-get hylafax-server and all neccecery software. 

After installing Capi4hylafax i get this message in the syslog

Oct 18 10:59:04 FaxServer FaxSend[443]: /dev/faxCAPI: Can not open modem (No suc
h file or directory)

am I missing something?

NLcom
Neuberger & Hughes Distributor & Service Center Benelux
Sint Maartenslaan 26, 6221 AX Maastricht
The Netherlands
Tel: +31 (0)43 3500190
Fax: +31 (0)43 3500192
Web: <http://www.nlcom.nl>
Contact: M. Szymanski
e-mail: szymanski@nlcom.nl
_________________________________________
LiNUX - The choice of the GNU generation
Open Minds. Open Sources. Open Future.



-----Oorspronkelijk bericht-----
Van: hylafax-users-bounce@hylafax.org
[mailto:hylafax-users-bounce@hylafax.org]Namens Lothar Krauss
Verzonden: donderdag 17 oktober 2002 21:28
Aan: Martin Szymanski;hylafax-users@hylafax.org
Onderwerp: Re: [hylafax-users] Hylafax doesn't know what modem to use


Hello Martin,

your error message is really interesting. I've checked two servers
where I installed capi4hylafax (one SuSE72, one SuSE8.0), and I did not found a
libfaxutil.so there, and c2faxrecv does not need it.

I think the best way is to use the binary from
ftp://ftp.avm.de/tools/capi4hylafax.linux without compiling it yourself, as
Viktor suggested. After unpacking the tar file you should only need to call
"./install".

Good Luck

Lothar

Am Don, 17 Okt 2002 schrieb Martin Szymanski: > Hello Lothar,
> 
> I've installed the driver and CAPI4Hylafax yet my inittab is empty. 
> Running the command 
> 
> /usr/local/bin/c2faxrecv -q "/var/spool/fax" &
> 
> results in this message:
> 
>  error while loading shared libraries: libfaxutil.so: cannot open shared object file: No such file or directory
> 
> faxstat does _not_ report the faxmodem to be ready only this:
> 
> HylaFAX scheduler on FaxServer.intra.nlcom.nl: Running
> 
> do you know how this error is caused?
> 
> Than you very much
> 
> Martin
> 

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*