Re: [hylafax-users] Hylafax doesn't know what modem to use

[Martin Szymanski <szymanski@nlcom.nl>]

Hello Lothar,

I've installed the driver and CAPI4Hylafax yet my inittab is empty. 
Running the command 

/usr/local/bin/c2faxrecv -q "/var/spool/fax" &

results in this message:

 error while loading shared libraries: libfaxutil.so: cannot open shared object file: No such file or directory

faxstat does _not_ report the faxmodem to be ready only this:

HylaFAX scheduler on FaxServer.intra.nlcom.nl: Running

do you know how this error is caused?

Than you very much

Martin


-----Oorspronkelijk bericht-----
Van: Lothar Krauss [mailto:Lothar.Krauss@epost.de]
Verzonden: woensdag 16 oktober 2002 18:41
Aan: Martin Szymanski;hylafax-users@hylafax.org
Onderwerp: Re: [hylafax-users] Hylafax doesn't know what modem to use


Hello Martin,

AVM does _not_ use faxgetty or faxaddmodem for their HylaFAX drivers. You need
ther capi driver for Linux _and_ "capi4hylafax" from their download server.

Do _not_ start i4l. After installing the capi driver and then capi4hylafax, a
new entry is added to your /etc/inittab file:

fr:2345:once:/usr/local/bin/c2faxrecv -q "/var/spool/fax"

This is needed even if you are using a sending only environment! After rebooting
your PC -- or after executing

/usr/local/bin/c2faxrecv -q "/var/spool/fax" &

faxstat should report something like

HylaFAX scheduler on linuxgwhun.rz: Running
Modem faxCAPI (+49.xxx.xxxxxxx): Running and idle

Regards

Lothar


Am Mit, 16 Okt 2002 schrieb Martin
Szymanski: > Hi, 
> 
> I have installed Hylafax on a Debian machine.
> I have set it up so that Hylafax will use the capi20 dev to send data to.
> Yet, when I type faxstat this is what comes up:
> 
> HylaFAX scheduler on FaxServer.intra.nlcom.nl: Running
> 
> Reading the Hylafax manual I conclude that it 'should'read:
> 
> HylaFAX scheduler on FaxServer.intra.nlcom.nl: Running
> Modem capi20 (000-123-4567): Running and idle
> 
> Also, all my sent faxes are killed after a certain period of time, the modem is never used.
> 
> I can send faxes using c2faxsend, so the driver for the Fritz! card is installed correctly.
> 
> Thanks in advance
> With Regards.
> 
> Martin Szymanski
> 
> 
> NLcom
> Neuberger & Hughes Distributor & Service Center Benelux
> Sint Maartenslaan 26, 6221 AX Maastricht
> The Netherlands
> Tel: +31 (0)43 3500190
> Fax: +31 (0)43 3500192
> Web: <http://www.nlcom.nl>
> Contact: M. Szymanski
> e-mail: szymanski@nlcom.nl
> _________________________________________
> LiNUX - The choice of the GNU generation
> Open Minds. Open Sources. Open Future.
> 
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*