|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Modem recommendation
Lee Howard wrote:
> Firstly, you *shouldn't* be having this error rate with *any* modem.
> Something's critically wrong. As it is a particularly interesting
> error, would you post the log that relates with "Modem protocol error
> (unknown post-page response)" ? Maybe it will give us a clue.
c00146102 and c00090313, both different fax numbers, attached (mangled
to protect their identities until I get permission to send test faxes).
"Canon Laser Class 9000 Series" (owned by the head office of the
company in question) and "Panasonic".
> I know it's not what you want to hear, but I use MultiTech
> MT5634ZBA-V92 and MT5634ZPX-PCI modems on most of my production
> servers which send to a total of a couple of thousand uniqe
> destinations with no problems.
That's what I'd read before purchasing the MultiTech modems in question ...
> I have much more grief with my USRs and Zyxels. I use Class 1
> exclusively with nearly all of my installations. The Class 1 firmware
> (if available) on the MT2384BA and MT5600BL should be very comparable
> to what is on the MT5634s, so your errors are quite surprising.
I'm using Class 2 on the MT2834BA's and Class 1 on the MT5600BL ...
similar error %age (but different errors).
> I suspect that you're using Class 2. Have you tried Class 1 ?
Not on those two modems yet; but I suggested it yesterday to my client.
--
Michael T. Babcock
C.T.O., FibreSpeed Ltd.
http://www.fibrespeed.net/~mbabcock
Apr 02 19:00:55.93: [20006]: SESSION BEGIN 00090313 1xxxxxxxx
Apr 02 19:00:55.93: [20006]: HylaFAX (tm) Version 4.1.1
Apr 02 19:00:55.93: [20006]: SEND FAX: JOB 17553 DEST xxxxxxxx COMMID 00090313 DEVICE '/dev/ttyS1'
Apr 02 19:00:55.93: [20006]: DELAY 75 ms
Apr 02 19:00:56.00: [20006]: DELAY 2600 ms
Apr 02 19:00:58.60: [20006]: <-- [4:ATZ\r]
Apr 02 19:00:59.37: [20006]: --> [3:ATZ]
Apr 02 19:00:59.37: [20006]: --> [2:OK]
Apr 02 19:00:59.37: [20006]: DELAY 3000 ms
Apr 02 19:01:02.37: [20006]: <-- [5:ATE0\r]
Apr 02 19:01:02.53: [20006]: --> [4:ATE0]
Apr 02 19:01:02.53: [20006]: --> [2:OK]
Apr 02 19:01:02.53: [20006]: <-- [5:ATV1\r]
Apr 02 19:01:02.69: [20006]: --> [2:OK]
Apr 02 19:01:02.69: [20006]: <-- [5:ATQ0\r]
Apr 02 19:01:02.85: [20006]: --> [2:OK]
Apr 02 19:01:02.85: [20006]: <-- [7:ATS0=0\r]
Apr 02 19:01:03.01: [20006]: --> [2:OK]
Apr 02 19:01:03.01: [20006]: <-- [7:ATS8=2\r]
Apr 02 19:01:03.17: [20006]: --> [2:OK]
Apr 02 19:01:03.17: [20006]: <-- [8:ATS7=60\r]
Apr 02 19:01:03.33: [20006]: --> [2:OK]
Apr 02 19:01:03.33: [20006]: <-- [6:AT&E4\r]
Apr 02 19:01:03.49: [20006]: --> [2:OK]
Apr 02 19:01:03.49: [20006]: <-- [6:AT&D3\r]
Apr 02 19:01:03.65: [20006]: --> [2:OK]
Apr 02 19:01:03.65: [20006]: <-- [6:AT&C1\r]
Apr 02 19:01:03.81: [20006]: --> [2:OK]
Apr 02 19:01:03.81: [20006]: <-- [12:AT+FCLASS=2\r]
Apr 02 19:01:03.97: [20006]: --> [2:OK]
Apr 02 19:01:03.97: [20006]: <-- [10:AT+FTBC=0\r]
Apr 02 19:01:04.13: [20006]: --> [2:OK]
Apr 02 19:01:04.13: [20006]: <-- [10:AT+FBOR=0\r]
Apr 02 19:01:04.29: [20006]: --> [2:OK]
Apr 02 19:01:04.29: [20006]: <-- [13:AT+FPHCTO=30\r]
Apr 02 19:01:04.45: [20006]: --> [2:OK]
Apr 02 19:01:04.45: [20006]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
Apr 02 19:01:04.62: [20006]: --> [2:OK]
Apr 02 19:01:04.62: [20006]: <-- [7:ATL1M1\r]
Apr 02 19:01:04.78: [20006]: --> [2:OK]
Apr 02 19:01:04.78: [20006]: <-- [12:AT+FCLASS=2\r]
Apr 02 19:01:05.04: [20006]: --> [2:OK]
Apr 02 19:01:05.04: [20006]: <-- [10:AT+FTBC=0\r]
Apr 02 19:01:05.30: [20006]: --> [2:OK]
Apr 02 19:01:05.30: [20006]: <-- [10:AT+FBOR=0\r]
Apr 02 19:01:05.56: [20006]: --> [2:OK]
Apr 02 19:01:05.56: [20006]: <-- [13:AT+FPHCTO=30\r]
Apr 02 19:01:05.83: [20006]: --> [2:OK]
Apr 02 19:01:05.83: [20006]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
Apr 02 19:01:06.10: [20006]: --> [2:OK]
Apr 02 19:01:06.10: [20006]: <-- [23:AT+FLID="xxxxxxxx"\r]
Apr 02 19:01:06.37: [20006]: --> [2:OK]
Apr 02 19:01:06.37: [20006]: DIAL xxxxxxxxxxx
Apr 02 19:01:06.37: [20006]: <-- [16:ATDTxxxxxxxxx@\r]
Apr 02 19:01:26.17: [20006]: --> [5:+FCON]
Apr 02 19:01:29.35: [20006]: --> [105:+FNSF:00 00 11 80 00 8A 49 10 41 53 53 41 20 41 42 4C 4F 59 20 39 30 30 30 4C 00 53 00 80 80 80 04 01 06 ]
Apr 02 19:01:29.35: [20006]: REMOTE NSF "00 00 11 80 00 8A 49 10 41 53 53 41 20 41 42 4C 4F 59 20 39 30 30 30 4C 00 53 00 80 80 80 04 01 06"
Apr 02 19:01:29.35: [20006]: NSF remote fax equipment: Canon Laser Class 9000 Series
Apr 02 19:01:29.35: [20006]: NSF remote station ID: "xxxxxxxxxxxx"
Apr 02 19:01:29.47: [20006]: --> [28:+FCSI:"xxxxxxxxxxxxxxxx"]
Apr 02 19:01:29.47: [20006]: REMOTE CSI "xxxxxxxxxxxxxx"
Apr 02 19:01:29.47: [20006]: --> [21:+FDIS:1,5,0,2,1,0,1,3]
Apr 02 19:01:29.47: [20006]: --> [2:OK]
Apr 02 19:01:29.47: [20006]: REMOTE best rate 14400 bit/s
Apr 02 19:01:29.47: [20006]: REMOTE max page width 1728 pixels in 215 mm
Apr 02 19:01:29.47: [20006]: REMOTE max unlimited page length
Apr 02 19:01:29.47: [20006]: REMOTE best vres 7.7 line/mm
Apr 02 19:01:29.47: [20006]: REMOTE best format 2-D MR
Apr 02 19:01:29.47: [20006]: REMOTE best 10 ms/scanline
Apr 02 19:01:29.47: [20006]: USE 14400 bit/s
Apr 02 19:01:29.47: [20006]: USE 10 ms/scanline
Apr 02 19:01:29.47: [20006]: SEND file "docq/doc17740.ps;70"
Apr 02 19:01:29.47: [20006]: USE page width 1728 pixels in 215 mm
Apr 02 19:01:29.47: [20006]: USE unlimited page length
Apr 02 19:01:29.47: [20006]: USE 3.85 line/mm
Apr 02 19:01:29.47: [20006]: USE 2-D MR
Apr 02 19:01:29.47: [20006]: <-- [24:AT+FDIS=0,5,0,2,1,0,0,3\r]
Apr 02 19:01:29.74: [20006]: --> [2:OK]
Apr 02 19:01:29.74: [20006]: <-- [7:AT+FDT\r]
Apr 02 19:01:36.48: [20006]: --> [21:+FDCS:0,5,0,2,1,0,0,3]
Apr 02 19:01:36.48: [20006]: --> [7:CONNECT]
Apr 02 19:01:36.48: [20006]: SEND wait for XON
Apr 02 19:01:36.48: [20006]: --> [1:]
Apr 02 19:01:36.48: [20006]: SEND begin page
Apr 02 19:01:36.48: [20006]: <-- data [1029]
Apr 02 19:01:36.48: [20006]: <-- data [1031]
Apr 02 19:01:36.48: [20006]: <-- data [1035]
Apr 02 19:01:36.48: [20006]: <-- data [1028]
Apr 02 19:01:37.48: [20006]: <-- data [1028]
Apr 02 19:01:37.48: [20006]: <-- data [1029]
Apr 02 19:01:37.48: [20006]: <-- data [1030]
Apr 02 19:01:37.48: [20006]: <-- data [1032]
Apr 02 19:01:38.96: [20006]: <-- data [1033]
Apr 02 19:01:41.63: [20006]: <-- data [1055]
Apr 02 19:01:42.32: [20006]: <-- data [1051]
Apr 02 19:01:43.21: [20006]: <-- data [1069]
Apr 02 19:01:44.21: [20006]: <-- data [1077]
Apr 02 19:01:44.21: [20006]: <-- data [1063]
Apr 02 19:01:44.21: [20006]: <-- data [1049]
Apr 02 19:01:44.21: [20006]: <-- data [1025]
Apr 02 19:01:45.21: [20006]: <-- data [1028]
Apr 02 19:01:45.21: [20006]: <-- data [1034]
Apr 02 19:01:45.21: [20006]: <-- data [1029]
Apr 02 19:01:45.21: [20006]: <-- data [1034]
Apr 02 19:01:46.21: [20006]: <-- data [1033]
Apr 02 19:01:46.21: [20006]: <-- data [1035]
Apr 02 19:01:46.21: [20006]: <-- data [384]
Apr 02 19:01:46.21: [20006]: SENT 22908 bytes of data
Apr 02 19:01:46.21: [20006]: <-- data [2]
Apr 02 19:01:46.21: [20006]: SEND end page
Apr 02 19:01:46.21: [20006]: --> [2:OK]
Apr 02 19:01:46.21: [20006]: SEND send EOP (no more pages or documents)
Apr 02 19:01:46.21: [20006]: <-- [9:AT+FET=2\r]
Apr 02 19:01:46.89: [20006]: --> [1:]
Apr 02 19:01:46.89: [20006]: --> [3:K]
Apr 02 19:02:19.65: [20006]: --> [3:ATZ]
Apr 02 19:02:19.65: [20006]: --> [2:OK]
Apr 02 19:02:19.65: [20006]: SEND recv unknown PPR 0x00
Apr 02 19:02:19.65: [20006]: <-- [6:AT+FK\r]
Apr 02 19:02:19.81: [20006]: --> [5:AT+FK]
Apr 02 19:02:19.81: [20006]: --> [2:OK]
Apr 02 19:02:19.81: [20006]: <-- [5:ATH0\r]
Apr 02 19:02:19.97: [20006]: --> [4:ATH0]
Apr 02 19:02:19.97: [20006]: --> [2:OK]
Apr 02 19:02:19.97: [20006]: SESSION END
Oct 01 11:59:27.26: [19166]: SESSION BEGIN 00146102 1xxxxxxxxxx
Oct 01 11:59:27.26: [19166]: HylaFAX (tm) Version 4.1.1
Oct 01 11:59:27.26: [19166]: SEND FAX: JOB 14457 DEST 1xxxxxxxxxx COMMID 00146102 DEVICE '/dev/ttyS1'
Oct 01 11:59:27.26: [19166]: MODEM set DTR OFF
Oct 01 11:59:27.26: [19166]: DELAY 75 ms
Oct 01 11:59:27.34: [19166]: MODEM set DTR ON
Oct 01 11:59:27.34: [19166]: DELAY 2600 ms
Oct 01 11:59:29.94: [19166]: MODEM set baud rate: 19200 baud, input flow RTS/CTS, output flow RTS/CTS
Oct 01 11:59:29.95: [19166]: MODEM flush i/o
Oct 01 11:59:29.95: [19166]: <-- [4:ATZ\r]
Oct 01 11:59:30.72: [19166]: --> [3:ATZ]
Oct 01 11:59:30.72: [19166]: --> [2:OK]
Oct 01 11:59:30.72: [19166]: DELAY 3000 ms
Oct 01 11:59:33.72: [19166]: <-- [5:ATE0\r]
Oct 01 11:59:33.88: [19166]: --> [4:ATE0]
Oct 01 11:59:33.88: [19166]: --> [2:OK]
Oct 01 11:59:33.88: [19166]: <-- [5:ATV1\r]
Oct 01 11:59:34.04: [19166]: --> [2:OK]
Oct 01 11:59:34.04: [19166]: <-- [5:ATQ0\r]
Oct 01 11:59:34.20: [19166]: --> [2:OK]
Oct 01 11:59:34.20: [19166]: <-- [7:ATS0=0\r]
Oct 01 11:59:34.37: [19166]: --> [2:OK]
Oct 01 11:59:34.37: [19166]: <-- [7:ATS8=2\r]
Oct 01 11:59:34.54: [19166]: --> [2:OK]
Oct 01 11:59:34.54: [19166]: <-- [8:ATS7=60\r]
Oct 01 11:59:34.71: [19166]: --> [2:OK]
Oct 01 11:59:34.72: [19166]: <-- [6:AT&E4\r]
Oct 01 11:59:34.88: [19166]: --> [2:OK]
Oct 01 11:59:34.88: [19166]: <-- [6:AT&D3\r]
Oct 01 11:59:35.05: [19166]: --> [2:OK]
Oct 01 11:59:35.05: [19166]: <-- [6:AT&C1\r]
Oct 01 11:59:35.22: [19166]: --> [2:OK]
Oct 01 11:59:35.22: [19166]: <-- [12:AT+FCLASS=2\r]
Oct 01 11:59:35.39: [19166]: --> [2:OK]
Oct 01 11:59:35.39: [19166]: <-- [10:AT+FTBC=0\r]
Oct 01 11:59:35.56: [19166]: --> [2:OK]
Oct 01 11:59:35.56: [19166]: <-- [10:AT+FBOR=0\r]
Oct 01 11:59:35.73: [19166]: --> [2:OK]
Oct 01 11:59:35.73: [19166]: <-- [13:AT+FPHCTO=30\r]
Oct 01 11:59:35.90: [19166]: --> [2:OK]
Oct 01 11:59:35.90: [19166]: <-- [10:AT+FBUG=1\r]
Oct 01 11:59:36.07: [19166]: --> [2:OK]
Oct 01 11:59:36.07: [19166]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
Oct 01 11:59:36.25: [19166]: --> [2:OK]
Oct 01 11:59:36.25: [19166]: <-- [7:ATL1M1\r]
Oct 01 11:59:36.42: [19166]: --> [2:OK]
Oct 01 11:59:36.42: [19166]: STATE CHANGE: RUNNING -> SENDING
Oct 01 11:59:36.42: [19166]: MODEM input buffering enabled
Oct 01 11:59:36.42: [19166]: <-- [12:AT+FCLASS=2\r]
Oct 01 11:59:36.69: [19166]: --> [2:OK]
Oct 01 11:59:36.69: [19166]: <-- [10:AT+FTBC=0\r]
Oct 01 11:59:36.96: [19166]: --> [2:OK]
Oct 01 11:59:36.96: [19166]: <-- [10:AT+FBOR=0\r]
Oct 01 11:59:37.23: [19166]: --> [2:OK]
Oct 01 11:59:37.23: [19166]: <-- [13:AT+FPHCTO=30\r]
Oct 01 11:59:37.50: [19166]: --> [2:OK]
Oct 01 11:59:37.50: [19166]: <-- [10:AT+FBUG=1\r]
Oct 01 11:59:37.77: [19166]: --> [2:OK]
Oct 01 11:59:37.77: [19166]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
Oct 01 11:59:38.05: [19166]: --> [2:OK]
Oct 01 11:59:38.05: [19166]: <-- [31:AT+FLID="Assa Abloy Canada #1"\r]
Oct 01 11:59:38.33: [19166]: --> [2:OK]
Oct 01 11:59:38.34: [19166]: DIAL 1xxxxxxxxxx
Oct 01 11:59:38.34: [19166]: <-- [16:ATDT1xxxxxxxxxx\r]
Oct 01 12:00:07.04: [19166]: --> [5:+FCON]
Oct 01 12:00:09.53: [19166]: --> [74:+FHR:FF 03 40 20 20 20 20 20 20 20 20 20 20 34 30 35 33 33 33 37 35 30 37 ]
Oct 01 12:00:09.84: [19166]: --> [32:+FHR:FF 13 80 00 EE 88 80 80 11 ]
Oct 01 12:00:09.84: [19166]: --> [57:+FNSF:00 00 0E 00 00 00 16 FF 01 03 00 10 00 02 95 80 08 ]
Oct 01 12:00:09.84: [19166]: REMOTE NSF "00 00 0E 00 00 00 16 FF 01 03 00 10 00 02 95 80 08"
Oct 01 12:00:09.84: [19166]: NSF remote fax equipment: Panasonic
Oct 01 12:00:09.84: [19166]: --> [28:+FCSI:"xxxxxxxxxx"]
Oct 01 12:00:09.84: [19166]: REMOTE CSI "xxxxxxxxxx"
Oct 01 12:00:09.96: [19166]: --> [21:+FDIS:1,5,0,2,1,0,1,5]
Oct 01 12:00:09.96: [19166]: --> [2:OK]
Oct 01 12:00:09.96: [19166]: REMOTE best rate 14400 bit/s
Oct 01 12:00:09.96: [19166]: REMOTE max page width 1728 pixels in 215 mm
Oct 01 12:00:09.96: [19166]: REMOTE max unlimited page length
Oct 01 12:00:09.96: [19166]: REMOTE best vres 7.7 line/mm
Oct 01 12:00:09.96: [19166]: REMOTE best format 2-D MR
Oct 01 12:00:09.96: [19166]: REMOTE best 20 ms/scanline
Oct 01 12:00:09.96: [19166]: USE 14400 bit/s
Oct 01 12:00:09.96: [19166]: USE 20 ms/scanline
Oct 01 12:00:09.96: [19166]: SEND file "docq/doc14646.ps;71"
Oct 01 12:00:09.96: [19166]: USE page width 1728 pixels in 215 mm
Oct 01 12:00:09.96: [19166]: USE unlimited page length
Oct 01 12:00:09.96: [19166]: USE 7.7 line/mm
Oct 01 12:00:09.96: [19166]: USE 2-D MR
Oct 01 12:00:09.96: [19166]: <-- [24:AT+FDIS=1,5,0,2,1,0,0,5\r]
Oct 01 12:00:10.24: [19166]: --> [2:OK]
Oct 01 12:00:10.24: [19166]: <-- [7:AT+FDT\r]
Oct 01 12:00:11.42: [19166]: --> [74:+FHT:FF 03 43 31 23 20 61 64 61 6E 61 43 20 79 6F 6C 62 41 20 61 73 73 41 ]
Oct 01 12:00:12.24: [19166]: --> [26:+FHT:FF 13 83 00 E2 88 00 ]
Oct 01 12:00:17.52: [19166]: --> [14:+FHR:FF 13 84 ]
Oct 01 12:00:17.52: [19166]: --> [21:+FDCS:1,5,0,2,1,0,0,5]
Oct 01 12:00:17.52: [19166]: --> [7:CONNECT]
Oct 01 12:00:17.52: [19166]: SEND wait for XON
Oct 01 12:00:17.52: [19166]: --> [1:]
Oct 01 12:00:17.52: [19166]: SEND begin page
Oct 01 12:00:17.52: [19166]: <-- data [1025]
Oct 01 12:00:17.52: [19166]: <-- data [1028]
Oct 01 12:00:17.52: [19166]: <-- data [1026]
Oct 01 12:00:17.52: [19166]: <-- data [1029]
Oct 01 12:00:17.52: [19166]: <-- data [1036]
Oct 01 12:00:19.52: [19166]: <-- data [1030]
Oct 01 12:00:19.52: [19166]: <-- data [1030]
Oct 01 12:00:19.52: [19166]: <-- data [1026]
Oct 01 12:00:21.70: [19166]: <-- data [1030]
Oct 01 12:00:21.70: [19166]: <-- data [1027]
Oct 01 12:00:23.60: [19166]: <-- data [1032]
Oct 01 12:00:23.60: [19166]: <-- data [1030]
Oct 01 12:00:23.60: [19166]: <-- data [1028]
Oct 01 12:00:24.92: [19166]: <-- data [1033]
Oct 01 12:00:26.71: [19166]: <-- data [1029]
Oct 01 12:00:26.71: [19166]: <-- data [1026]
Oct 01 12:00:28.61: [19166]: <-- data [1029]
Oct 01 12:00:28.61: [19166]: <-- data [1024]
Oct 01 12:00:29.54: [19166]: <-- data [1024]
Oct 01 12:00:31.16: [19166]: <-- data [1024]
Oct 01 12:00:32.64: [19166]: <-- data [1034]
Oct 01 12:00:32.64: [19166]: <-- data [1031]
Oct 01 12:00:33.57: [19166]: <-- data [1034]
Oct 01 12:00:35.57: [19166]: <-- data [1030]
Oct 01 12:00:35.57: [19166]: <-- data [1032]
Oct 01 12:00:35.57: [19166]: <-- data [1034]
Oct 01 12:00:37.57: [19166]: <-- data [1027]
Oct 01 12:00:37.57: [19166]: <-- data [549]
Oct 01 12:00:37.57: [19166]: SENT 28190 bytes of data
Oct 01 12:00:37.57: [19166]: <-- data [2]
Oct 01 12:00:37.57: [19166]: SEND end page
Oct 01 12:00:37.64: [19166]: --> [22:怘f怘]
Oct 01 12:00:37.64: [19166]: --> [6:ҍ]
Oct 01 12:00:38.41: [19166]: --> [1:]
Oct 01 12:00:38.41: [19166]: --> [6:ҍ]
Oct 01 12:01:11.03: [19166]: --> [3:ATZ]
Oct 01 12:01:11.03: [19166]: --> [2:OK]
Oct 01 12:01:11.03: [19166]: SEND send EOP (no more pages or documents)
Oct 01 12:01:11.03: [19166]: <-- [9:AT+FET=2\r]
Oct 01 12:01:11.20: [19166]: --> [8:AT+FET=2]
Oct 01 12:01:11.20: [19166]: --> [5:ERROR]
Oct 01 12:01:11.20: [19166]: SEND recv unknown PPR 0x00
Oct 01 12:01:11.20: [19166]: <-- [6:AT+FK\r]
Oct 01 12:01:11.37: [19166]: --> [5:AT+FK]
Oct 01 12:01:11.37: [19166]: --> [2:OK]
Oct 01 12:01:11.37: [19166]: <-- [5:ATH0\r]
Oct 01 12:01:11.53: [19166]: --> [4:ATH0]
Oct 01 12:01:11.53: [19166]: --> [2:OK]
Oct 01 12:01:11.53: [19166]: MODEM set DTR OFF
Oct 01 12:01:11.53: [19166]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Oct 01 12:01:11.53: [19166]: SESSION END
