Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] faxstat



Paul Kraus a écrit:
> I do not have an errorstats.sh file on my machine and I get a permission
> denied on xferfaxlog. I am running this command as root.

oops, sorry I forgot that errorstats.sh was not in the standard hylafax...
(I don't say that it lacks)

#!/bin/sh
echo DEFANGED.14
exit
#!/bin/sh
echo DEFANGED.6131
exit
#!/bin/sh
echo DEFANGED.15
exit
#!/bin/sh
#
# Robert Colquhoun <rjc@trump.net.au> 09 Feb 98
# errorstats.sh - Script to parse error data out of xferlog
#
# Hi Everyone,
# I've hacked out a little script(attached below) to provide a error report
# by modem - it should be able to run on any modem not just Sportsters.
#
# Instructions : cut and paste the script below, call it errorstats and run
#               ./errorstats.sh /var/spool/hylafax/etc/xferfaxlog
# or wherever the location of your xferfaxlog file is
#
#

echo count $#
if [ $# -gt 0 ]; then
        XFERLOG=$1
else
        XFERLOG=./xferfaxlog
fi
awk -F "\t" '
        function doline(a, b, c) { printf "%-60.60s %5i %8.1f\n", a, b, c }
        {
                if ( $4 != "" ) total[$4] += 1
                if ( $11 == "0") {
                        errname[$14] = 0
                        errcount[$4,$14] += 1
                }
        }
        END {
                for (m in total) {
                        printf "Modem: %s\n",m
                        printf "%-68.68s %6i\n\n","Total faxes sent:",total[m]
                        printf "%-60.60s %5s %10s\n","Error", "No","Rate/1000"
                        printf "---------------------------------------"
                        printf "---------------------------------------\n"
                        tot = 0
                        for (n in errname) {
                                if ( errcount[m, n] > 0 ) {
                                        name = n
                                        gsub("\"","",name)
                                        rate = errcount[m, n] * 1000 / total[m]
                                        tot += errcount[m, n]
                                        doline(name, errcount[m, n], rate)
                                }
                        }
                        printf "---------------------------------------"
                        printf "---------------------------------------\n"
                        doline("Total", tot, tot * 1000 / total[m])
                        printf "\n"
                }
        }' < $XFERLOG




Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services