[hylafax-users] Mac OS X Fax Recieve Errors

[cbain <cbain@acordex.com>]

Dear User Group:

I am attempting to port Hylafax to Mac OS X 10.1.5. I have compiled, 
configured and run the software and can receive faxes as long as I set 
the acceptable error percentage "PercentGoodLines" to a small number like 
50% (I am actually getting 15-20% error rate). I am using the internal 
modem of the Macintosh which responds to the modem query strings as:

AT+FMFR?  yields CONEXANT
AT+FMDL?  yields AC/K56

I have configured it as a class 2 modem. I am sending a low res fax from 
a Panasonic fax machine. The receive log I get is shown below. If I set 
the error tolerance lower, Hylafax rejects the fax and the sending fax 
machine hangs up giving an error. An ideas as to what may be causing this 
problem ? Help would be greatly appreciated:

Sep 23 10:24:56.94: [  543]: SESSION BEGIN 00000028 19783527848
Sep 23 10:24:56.94: [  543]: HylaFAX (tm) Version 4.1.2
Sep 23 10:24:56.94: [  543]: <-- [4:ATA\r]
Sep 23 10:25:05.64: [  543]: --> [5:+FCON]
Sep 23 10:25:05.64: [  543]: ANSWER: FAX CONNECTION  DEVICE 
'/dev/cu.modem'
Sep 23 10:25:05.64: [  543]: RECV FAX: begin
Sep 23 10:25:07.00: [  543]: --> [22:+FDCS: 0,3,0,2,0,0,0,0]
Sep 23 10:25:07.00: [  543]: REMOTE wants 9600 bit/s
Sep 23 10:25:07.00: [  543]: REMOTE wants page width 1728 pixels in 215 mm
Sep 23 10:25:07.00: [  543]: REMOTE wants unlimited page length 
Sep 23 10:25:07.00: [  543]: REMOTE wants 3.85 line/mm
Sep 23 10:25:07.00: [  543]: REMOTE wants 1-D MR
Sep 23 10:25:07.00: [  543]: --> [2:OK]
Sep 23 10:25:07.01: [  543]: <-- [7:AT+FDR\r]
Sep 23 10:25:08.77: [  543]: --> [5:+FCFR]
Sep 23 10:25:10.95: [  543]: --> [22:+FDCS: 0,3,0,2,0,0,0,0]
Sep 23 10:25:10.95: [  543]: REMOTE wants 9600 bit/s
Sep 23 10:25:10.95: [  543]: REMOTE wants page width 1728 pixels in 215 mm
Sep 23 10:25:10.95: [  543]: REMOTE wants unlimited page length 
Sep 23 10:25:10.95: [  543]: REMOTE wants 3.85 line/mm
Sep 23 10:25:10.95: [  543]: REMOTE wants 1-D MR
Sep 23 10:25:10.95: [  543]: --> [7:CONNECT]
Sep 23 10:25:10.95: [  543]: RECV: begin page
Sep 23 10:25:10.95: [  543]: RECV: send trigger 022
Sep 23 10:25:10.95: [  543]: <-- data [1]
Sep 23 10:25:38.92: [  543]: RECV: 1057 total lines, 165 bad lines, 7 
consecutive bad lines
Sep 23 10:25:38.92: [  543]: --> [17:+FPTS: 1,2219,0,0]
Sep 23 10:25:40.38: [  543]: --> [7:+FET: 2]
Sep 23 10:25:40.38: [  543]: RECV recv EOP (no more pages or documents)
Sep 23 10:25:40.38: [  543]: --> [2:OK]
Sep 23 10:25:40.38: [  543]: RECV send MCF (message confirmation)
Sep 23 10:25:40.38: [  543]: RECV FAX (00000028): from <UNSPECIFIED>, 
page 1 in 0:33, INF, 3.85 line/mm, 1-D MR, 9600 bit/s
Sep 23 10:25:40.38: [  543]: RECV FAX (00000028): recvq/fax00008.tif from 
<UNSPECIFIED>, route to <unspecified>, 1 pages in 0:35
Sep 23 10:25:40.38: [  543]: <-- [7:AT+FDR\r]
Sep 23 10:25:43.24: [  543]: --> [8:+FHNG: 0]
Sep 23 10:25:43.24: [  543]: REMOTE HANGUP: Normal and proper end of 
connection (code 0)
Sep 23 10:25:43.25: [  543]: RECV FAX: bin/faxrcvd "recvq/fax00008.tif" 
"cu.modem" "00000028" "" "" ""
Sep 23 10:26:43.56: [  543]: RECV FAX: end
Sep 23 10:26:43.56: [  543]: SESSION END


Chris

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*