|
Report any problems to
webmaster@hylafax.org
HylaFAX is a trademark of Silicon Graphics Corporation. Internet connectivity for hylafax.org is provided by: VirtuALL Private Host Services |
| Hylafax Mailing List Archives |
Hylafax Configuration:
Hylafax v 4.1.3 (rpm install)
Redhat 7.3
Kernel 2.4.19
External USR 56k fax Modems, ttyS0 and ttyS1 configured as Class1
My problem is as follows:
Hylafax stops answering incoming calls. No set period of time, sometimes locks up after a couple of hours or could take a day or two. Typically all I do is initiate a /etc/rc.d/init.d/hylafax restart and the problem clears up for another undeterminable period of time..
Initially I had the problem with older USR 33.6 fax modems and thought it was the modems. I replaced them with newer USR 56k fax modems. However, the problem never cleared. I started out running in Class 2.0 and with default flow control. I have now tuned it down to Class 1 and FIFO. The initial kernel that I was working with was 2.4.18 . I read on the newsgroups that there may have been a problem with that kernel and it was suggested to go to 2.4.19. Which I did, still having the same problem. The machine is a Pentium 3 667 box with 512 MB of ram, plenty of disk space.
I have included my logs for the actual connection that caused the lock up, notice the second to last line which contains: Sep 19 18:08:34.87: [ 1932]: --> [5:ÿ^S~L^P^C], I have seen this on all of the logs that locked up the system. I have also included the /var/log/message file, config.ttyS0 and config.ttyS1, hfaxd.conf and hyla.conf files. Any help would be greatly appreciated.
Regards
Christopher J Joles, CCNA
I.S. Manager
PROTEA Behavioral Health Services
/var/hylafax/c00000547
Sep 19 18:04:11.01: [ 1932]: SESSION BEGIN 00000547 12079927010
Sep 19 18:04:11.01: [ 1932]: HylaFAX (tm) Version 4.1.3
Sep 19 18:04:11.01: [ 1932]: <-- [13:AT+FCLASS=1A\r]
Sep 19 18:04:16.56: [ 1932]: --> [7:CONNECT]
Sep 19 18:04:16.56: [ 1932]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'
Sep 19 18:04:16.56: [ 1932]: RECV FAX: begin
Sep 19 18:04:16.56: [ 1932]: <-- data [23]
Sep 19 18:04:16.56: [ 1932]: <-- data [2]
Sep 19 18:04:16.59: [ 1932]: --> [7:CONNECT]
Sep 19 18:04:16.59: [ 1932]: <-- data [10]
Sep 19 18:04:16.59: [ 1932]: <-- data [2]
Sep 19 18:04:18.55: [ 1932]: --> [2:OK]
Sep 19 18:04:18.55: [ 1932]: <-- [9:AT+FRH=3\r]
Sep 19 18:04:19.00: [ 1932]: --> [7:CONNECT]
Sep 19 18:04:20.43: [ 1932]: --> [2:OK]
Sep 19 18:04:20.43: [ 1932]: REMOTE TSI "2073745004"
Sep 19 18:04:20.43: [ 1932]: <-- [9:AT+FRH=3\r]
Sep 19 18:04:20.45: [ 1932]: --> [7:CONNECT]
Sep 19 18:04:20.70: [ 1932]: --> [2:OK]
Sep 19 18:04:20.70: [ 1932]: REMOTE wants 14400 bit/s
Sep 19 18:04:20.70: [ 1932]: REMOTE wants page width 1728 pixels in 215 mm
Sep 19 18:04:20.70: [ 1932]: REMOTE wants unlimited page length
Sep 19 18:04:20.70: [ 1932]: REMOTE wants 7.7 line/mm
Sep 19 18:04:20.70: [ 1932]: REMOTE wants 2-D MR
Sep 19 18:04:20.70: [ 1932]: RECV training at v.17 14400 bit/s
Sep 19 18:04:20.70: [ 1932]: <-- [11:AT+FRM=145\r]
Sep 19 18:04:22.40: [ 1932]: --> [7:CONNECT]
Sep 19 18:04:23.90: [ 1932]: RECV: TCF 2723 bytes, 0% non-zero, 2686 zero-run
Sep 19 18:04:23.91: [ 1932]: --> [10:NO CARRIER]
Sep 19 18:04:23.91: [ 1932]: DELAY 75 ms
Sep 19 18:04:23.99: [ 1932]: TRAINING succeeded
Sep 19 18:04:23.99: [ 1932]: <-- [9:AT+FTH=3\r]
Sep 19 18:04:24.19: [ 1932]: --> [7:CONNECT]
Sep 19 18:04:24.19: [ 1932]: <-- data [3]
Sep 19 18:04:24.19: [ 1932]: <-- data [2]
Sep 19 18:04:25.37: [ 1932]: --> [2:OK]
Sep 19 18:04:25.37: [ 1932]: <-- [11:AT+FRM=146\r]
Sep 19 18:04:26.56: [ 1932]: --> [7:CONNECT]
Sep 19 18:04:26.56: [ 1932]: RECV: begin page
Sep 19 18:04:57.52: [ 1932]: RECV: 2197 total lines, 0 bad lines, 0 consecutive bad lines
Sep 19 18:04:57.52: [ 1932]: RECV: end page
Sep 19 18:04:57.52: [ 1932]: --> [10:NO CARRIER]
Sep 19 18:04:57.52: [ 1932]: <-- [9:AT+FRH=3\r]
Sep 19 18:04:57.85: [ 1932]: --> [7:CONNECT]
Sep 19 18:04:58.68: [ 1932]: --> [2:OK]
Sep 19 18:06:10.12: [ 1932]: <-- [9:AT+FTH=3\r]
Sep 19 18:06:10.32: [ 1932]: --> [7:CONNECT]
Sep 19 18:06:10.32: [ 1932]: RECV send MCF (message confirmation)
Sep 19 18:06:10.32: [ 1932]: RECV FAX (00000547): from 2073745004, page 3 in 0:35, INF, 7.7 line/mm, 2-D MR, 14400 bit/s
Sep 19 18:06:10.32: [ 1932]: <-- data [3]
Sep 19 18:06:10.32: [ 1932]: <-- data [2]
Sep 19 18:06:11.49: [ 1932]: --> [2:OK]
Sep 19 18:06:11.49: [ 1932]: <-- [11:AT+FRM=146\r]
Sep 19 18:06:13.94: [ 1932]: --> [7:CONNECT]
Sep 19 18:06:13.94: [ 1932]: RECV: begin page
Sep 19 18:06:40.80: [ 1932]: RECV: 2168 total lines, 0 bad lines, 0 consecutive bad lines
Sep 19 18:06:40.80: [ 1932]: RECV: end page
Sep 19 18:06:40.80: [ 1932]: --> [10:NO CARRIER]
Sep 19 18:06:40.80: [ 1932]: <-- [9:AT+FRH=3\r]
Sep 19 18:06:41.04: [ 1932]: --> [7:CONNECT]
Sep 19 18:06:42.07: [ 1932]: --> [2:OK]
Sep 19 18:06:42.07: [ 1932]: RECV recv MPS (more pages, same document)
Sep 19 18:06:42.07: [ 1932]: <-- [9:AT+FRS=7\r]
Sep 19 18:06:43.18: [ 1932]: --> [2:OK]
Sep 19 18:06:43.18: [ 1932]: <-- [9:AT+FTH=3\r]
Sep 19 18:06:43.38: [ 1932]: --> [7:CONNECT]
Sep 19 18:06:43.38: [ 1932]: RECV send MCF (message confirmation)
Sep 19 18:06:43.38: [ 1932]: RECV FAX (00000547): from 2073745004, page 4 in 0:33, INF, 7.7 line/mm, 2-D MR, 14400 bit/s
Sep 19 18:06:43.38: [ 1932]: <-- data [3]
Sep 19 18:06:43.38: [ 1932]: <-- data [2]
Sep 19 18:06:44.56: [ 1932]: --> [2:OK]
Sep 19 18:06:44.56: [ 1932]: <-- [11:AT+FRM=146\r]
Sep 19 18:06:47.01: [ 1932]: --> [7:CONNECT]
Sep 19 18:06:47.01: [ 1932]: RECV: begin page
Sep 19 18:07:23.72: [ 1932]: RECV: 2158 total lines, 0 bad lines, 0 consecutive bad lines
Sep 19 18:07:23.72: [ 1932]: RECV: end page
Sep 19 18:07:23.72: [ 1932]: --> [10:NO CARRIER]
Sep 19 18:07:23.72: [ 1932]: <-- [9:AT+FRH=3\r]
Sep 19 18:07:24.24: [ 1932]: --> [7:CONNECT]
Sep 19 18:07:24.88: [ 1932]: --> [2:OK]
Sep 19 18:07:24.88: [ 1932]: RECV recv MPS (more pages, same document)
Sep 19 18:07:24.88: [ 1932]: <-- [9:AT+FRS=7\r]
Sep 19 18:07:25.65: [ 1932]: --> [2:OK]
Sep 19 18:07:25.65: [ 1932]: <-- [9:AT+FTH=3\r]
Sep 19 18:07:25.85: [ 1932]: --> [7:CONNECT]
Sep 19 18:07:25.85: [ 1932]: RECV send MCF (message confirmation)
Sep 19 18:07:25.85: [ 1932]: RECV FAX (00000547): from 2073745004, page 5 in 0:42, INF, 7.7 line/mm, 2-D MR, 14400 bit/s
Sep 19 18:07:25.85: [ 1932]: <-- data [3]
Sep 19 18:07:25.85: [ 1932]: <-- data [2]
Sep 19 18:07:27.03: [ 1932]: --> [2:OK]
Sep 19 18:07:25.85: [ 1932]: <-- data [2]
Sep 19 18:07:27.03: [ 1932]: --> [2:OK]
Sep 19 18:07:27.03: [ 1932]: <-- [11:AT+FRM=146\r]
Sep 19 18:07:30.59: [ 1932]: --> [7:CONNECT]
Sep 19 18:07:30.59: [ 1932]: RECV: begin page
Sep 19 18:08:00.94: [ 1932]: RECV: 2154 total lines, 0 bad lines, 0 consecutive bad lines
Sep 19 18:08:00.94: [ 1932]: RECV: end page
Sep 19 18:08:00.94: [ 1932]: --> [10:NO CARRIER]
Sep 19 18:08:00.94: [ 1932]: <-- [9:AT+FRH=3\r]
Sep 19 18:08:01.40: [ 1932]: --> [7:CONNECT]
Sep 19 18:08:02.21: [ 1932]: --> [2:OK]
Sep 19 18:08:02.21: [ 1932]: RECV recv MPS (more pages, same document)
Sep 19 18:08:02.21: [ 1932]: <-- [9:AT+FRS=7\r]
Sep 19 18:08:02.32: [ 1932]: --> [2:OK]
Sep 19 18:08:02.32: [ 1932]: <-- [9:AT+FTH=3\r]
Sep 19 18:08:32.32: [ 1932]: MODEM <Timeout>
Sep 19 18:08:32.32: [ 1932]: RECV send MCF (message confirmation)
Sep 19 18:08:32.32: [ 1932]: RECV FAX (00000547): from 2073745004, page 6 in 1:07, INF, 7.7 line/mm, 2-D MR, 14400 bit/s
Sep 19 18:08:32.32: [ 1932]: <-- data [3]
Sep 19 18:08:32.32: [ 1932]: <-- data [2]
Sep 19 18:08:34.87: [ 1932]: --> [5:ÿ^S~L^P^C]
Sep 20 08:00:13.24: [ 1932]: CLOSE /dev/ttyS0
/var/log/messages
Sep 19 17:57:52 faxserver FaxGetty[1932]: MODEM USR U.S. Robotics 56K FAX EXT V5.2.9/Configuration Profile... Product type
US/Canada External Product ID: 00568604 Options V32bis,V.80,V.34+,x2,V.90,V.92 Fax Options Cla
ss 1/Class 2.0 Line Options Caller ID, Distinctive Ring Clock Freq 92.0Mhz EPROM 256k RAM
32k FLASH date 2/16/2001 FLASH rev 5.2.9 DSP date 2/16/2001 DSP rev
5.2.9
Sep 19 17:58:12 faxserver FaxGetty[1932]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'
Sep 19 17:59:00 faxserver FaxGetty[1932]: MODEM USR U.S. Robotics 56K FAX EXT V5.2.9/Configuration Profile... Product type
US/Canada External Product ID: 00568604 Options V32bis,V.80,V.34+,x2,V.90,V.92 Fax Options Cla
ss 1/Class 2.0 Line Options Caller ID, Distinctive Ring Clock Freq 92.0Mhz EPROM 256k RAM
32k FLASH date 2/16/2001 FLASH rev 5.2.9 DSP date 2/16/2001 DSP rev
5.2.9
Sep 19 18:00:12 faxserver FaxGetty[1932]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'
Sep 19 18:00:58 faxserver FaxGetty[1932]: RECV FAX (00000546): from 2073745004, page 1 in 0:39, INF, 7.7 line/mm, 2-D MR, 14400 bit/s
Sep 19 18:01:34 faxserver FaxGetty[1932]: RECV FAX (00000546): from 2073745004, page 2 in 0:36, INF, 7.7 line/mm, 2-D MR, 14400 bit/s
Sep 19 18:02:13 faxserver FaxGetty[1932]: RECV FAX (00000546): from 2073745004, page 3 in 0:39, INF, 7.7 line/mm, 2-D MR, 14400 bit/s
Sep 19 18:02:51 faxserver FaxGetty[1932]: RECV FAX (00000546): from 2073745004, page 4 in 0:38, INF, 7.7 line/mm, 2-D MR, 14400 bit/s
Sep 19 18:03:32 faxserver FaxGetty[1932]: RECV FAX (00000546): from 2073745004, page 5 in 0:41, INF, 7.7 line/mm, 2-D MR, 14400 bit/s
Sep 19 18:03:32 faxserver FaxGetty[1932]: RECV FAX (00000546): recvq/fax00399.tif from 2073745004, route to <unspecified>, 5 pages i
n 3:20
Sep 19 18:03:33 faxserver FaxGetty[1932]: RECV FAX: bin/faxrcvd "recvq/fax00399.tif" "ttyS0" "00000546" "" "" ""
Sep 19 18:03:45 faxserver FaxGetty[1932]: MODEM USR U.S. Robotics 56K FAX EXT V5.2.9/Configuration Profile... Product type
US/Canada External Product ID: 00568604 Options V32bis,V.80,V.34+,x2,V.90,V.92 Fax Options Cla
ss 1/Class 2.0 Line Options Caller ID, Distinctive Ring Clock Freq 92.0Mhz EPROM 256k RAM
32k FLASH date 2/16/2001 FLASH rev 5.2.9 DSP date 2/16/2001 DSP rev
5.2.9
Sep 19 18:04:16 faxserver FaxGetty[1932]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'
Sep 19 18:04:58 faxserver FaxGetty[1932]: RECV FAX (00000547): from 2073745004, page 1 in 0:35, INF, 7.7 line/mm, 2-D MR, 14400 bit/s
Sep 19 18:05:35 faxserver FaxGetty[1932]: RECV FAX (00000547): from 2073745004, page 2 in 0:37, INF, 7.7 line/mm, 2-D MR, 14400 bit/s
Sep 19 18:06:10 faxserver FaxGetty[1932]: RECV FAX (00000547): from 2073745004, page 3 in 0:35, INF, 7.7 line/mm, 2-D MR, 14400 bit/s
Sep 19 18:06:43 faxserver FaxGetty[1932]: RECV FAX (00000547): from 2073745004, page 4 in 0:33, INF, 7.7 line/mm, 2-D MR, 14400 bit/s
Sep 19 18:07:25 faxserver FaxGetty[1932]: RECV FAX (00000547): from 2073745004, page 5 in 0:42, INF, 7.7 line/mm, 2-D MR, 14400 bit/s
Sep 19 18:08:32 faxserver FaxGetty[1932]: RECV FAX (00000547): from 2073745004, page 6 in 1:07, INF, 7.7 line/mm, 2-D MR, 14400 bit/s
config.ttyS0
# $Id: usr-xon,v 1.6 2002/04/07 20:29:27 darren Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
#
# Permission to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
#
#
# Configuration for using the Class 1 command interface with
# a USR Courier or Sportster modem and XON/XOFF flow control.
#
#
CountryCode: 1
AreaCode: 207
FAXNumber: 992-7010
LongDistancePrefix: 1
InternationalPrefix: 011
DialStringRules: etc/dialrules
ServerTracing: 1
SessionTracing: 11
RecvFileMode: 0644
LogFileMode: 0644
DeviceMode: 0644
RingsBeforeAnswer: 1
#
# Disables the reporting of bad frames by the modem. This
# overcomes a firmware problem in the x2 and V90 Sportsters.
# It is not necessary for the Courier modem.
#
Class2NRCmd: AT+FNR=1,1,1,0
config.ttyS1
# $Id: usr-xon,v 1.6 2002/04/07 20:29:27 darren Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
#
# Permission to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
#
#
# Configuration for using the Class 1 command interface with
# a USR Courier or Sportster modem and XON/XOFF flow control.
#
#
CountryCode: 1
AreaCode: 207
FAXNumber: 992-7010
LongDistancePrefix: 1
InternationalPrefix: 011
DialStringRules: etc/dialrules
ServerTracing: 1
SessionTracing: 11
RecvFileMode: 0644
LogFileMode: 0644
DeviceMode: 0644
RingsBeforeAnswer: 1
#
# Disables the reporting of bad frames by the modem. This
# overcomes a firmware problem in the x2 and V90 Sportsters.
# It is not necessary for the Courier modem.
#
Class2NRCmd: AT+FNR=1,1,1,0
hfaxd.conf
#
# HylaFAX Client-Server Protocol Configuration.
#
# Consult hfaxd(1M) for information on the contents
# of this file. Note that pathnames specified in
# this file are relative to the root of the spooling
# area because hfaxd uses chroot to confine client
# accesses to the server's filesystem.
#
LogFacility: daemon # syslog facility (want this 1st))
ServerTracing: 0xFFF # just server operation
#IdleTimeout: 900 # initial client idle timeout (secs)
#MaxIdleTimeout: 7200 # max client idle timeout (secs)
#MaxLoginAttempts: 5 # max # login attempts before disconnect
#MaxAdminAttempts: 5 # max # admin attempts before disconnect
#MaxConsecutiveBadCmds: 10 # max # invalid cmds before disconnect
#FaxContact: FaxMaster # who gets questions/complaints
#UserAccessFile: "/etc/hosts.hfaxd" # user+host access control file
#ShutdownFile: "/etc/shutdown" # server shutdown control filename
#XferLogFile: "/etc/clientlog" # for logging client file transfers
#FaxQFIFOName: "/FIFO" # FIFO name for talking to faxq process
#
# The default format used to return job status queries.
# Note that clients can override this with JOBFMT.
#
#JobFmt: "%-3j %3i %1a %6.6o %-12.12e %5P %5D %7z %.25s"
#
# The default format used to return recvq status queries.
# Note that clients can override this with RCVFMT.
#
#RcvFmt: "%-7m %4p%1z %-8.8o %14.14s %7t %f"
#
# The default format used to return modem status queries.
# Note that clients can override this with MODEMFMT.
#
#ModemFmt: "Modem %m (%n): %s"
#
# The default format used to return file-oriented
# directory listings.
# Note that clients can override this with FILEFMT.
#
#FileFmt: "%-7p %3l %8o %8s %-12.12m %.48f"
# SNPP-specific parameters.
#
#MaxMsgLength: 128 # max pager message length
#PagerIDMapFile: "/etc/pagermap" # file with pager ID mapping rules
#
# The following three items define the mapping from
# SNPP service level to job scheduling priority and
# expiration (kill) time. Each item should have a
# list of 12 values that define the mapping for service
# levels 0 through 11 (first item is level 0, second
# item level 1, ... etc.).
#
#PriorityMap: "63 127 127 127 127 127 127 127 127 127 127 127"
#RetryTimeMap: "30 60 60 180 0 0 0 0 0 0 0 0"
#KillTimeMap: " 5 5 5 15 60 240 720 1440 1440 1440 1440 1440"
hyla.conf
# hyla.conf
#
# This is the system-wide config file used by HylaFAX client programs:
# sendfax, faxstat, faxalter, faxmail, faxrm, sendpage, faxwatch,
# textfmt.
# The per-user config file is ~/.hylarc, which has the same syntax of
# hyla.conf.
#
# Below you find some examples. Read the man pages of the HylaFAX client
# programs for a complete list of the parameters that can be used in this file.
#
# Vertical resolution for outgoing faxes.
# Default is 98 lines/inch, aka 'low', better is 196 lines/inch, aka 'fine'.
# Equivalent to 'sendfax' -l and -m options.
VRes: 196
# KillTime: time before expiring a job.
# Default is 3 hours. Equivalent to 'sendfax' -k option.
# Tipically this is needed when bulk faxing.
#KillTime: "now +24 hours" # Give jobs 24h before expiring them
# Notify policy (for outgoing faxes).
# Default is to notify only in case of problems. Equivalent to 'sendfax'
# -D option.
#Notify: Done # Notify even for succesfully sent jobs
# 'faxstat' output
# Uncomment this to change the format of 'faxstat' output to show the
# date/time the faxes will be/have been transmitted.
#JobFmt: "%-4j %-19Y %1a %6.6o %-14.14e %5P %5D %.25s" # faxstat -sdl output
# Network HylaFAX server: redirect all client commands to an HylaFAX server.
# Uncomment this if this system has no fax-modems connected to it, and there
# is an HylaFAX server on your network. Equivalent to 'sendfax' -h option.
#Host: faxserver.mydomain.dom
# Pagesize; RPM default is 'a4'
#PageSize: letter
# Disable PageChopping. Default is to chop.
#PageChop: none # Avoid page chopping
# Cover page date format.
#DateFormat: "%d/%m/%Y %H:%M:%S" # 'European style' (day, month, year)
# FontMap/FontPath added by faxsetup (Mon Aug 26 16:50:16 EDT 2002)
FontMap: /usr/share/ghostscript/6.52/lib:/usr/share/ghostscript/6.52/vflib:/usr/share/ghostscript/fonts:/usr/share/fonts/default/g
hostscript:/usr/share/fonts/default/Type1:/usr/share/fonts/default/amspsfnt/pfb:/usr/share/fonts/default/cmpsfont/pfb
FontPath: /usr/share/ghostscript/6.52/lib:/usr/share/ghostscript/6.52/vflib:/usr/share/ghostscript/fonts:/usr/share/fonts/default/g
hostscript:/usr/share/fonts/default/Type1:/usr/share/fonts/default/amspsfnt/pfb:/usr/share/fonts/default/cmpsfont/pfb
|
|
|