[hylafax-users] Fw: Fw: Fw: Problem with state "waiting for modem to come ready" after sending a fax

To: "Lee Howard" <faxguy@howardsilvan.com>
Subject: [hylafax-users] Fw: Fw: Fw: Problem with state "waiting for modem to come ready" after sending a fax
From: <nico@gruppoerrepi.it>
Cc: <hylafax-user@hylafax.org>
Reply-To: <nico@gruppoerrepi.it>
Date: Fri, 30 Aug 2002 18:45:51 +0200
I send again this mail in plain text mode because the hylafax.org mail
server tell me so.
Thanks

----- Original Message -----
From: nico@gruppoerrepi.it
To: Lee Howard
Cc: hylafax-user@hylafax.org
Sent: Friday, August 30, 2002 5:43 PM
Subject: Re: [hylafax-users] Fw: Fw: Problem with state "waiting for modem
to come ready" after sending a fax


I'm sorry, I'm novice !

I send you the log of the server that doesn't work correctly:

ago 30 17:25:17 linux2wwp FaxQueuer[25961]: HylaFAX (tm) Version 4.1.3
ago 30 17:25:17 linux2wwp FaxQueuer[25961]: Copyright (c) 1990-1996 Sam
Leffler
ago 30 17:25:17 linux2wwp FaxQueuer[25961]: Copyright (c) 1991-1996 Silicon
Graphics, Inc.
Aug 30 17:25:17 linux2wwp FaxGetty[25913]: HELLO
Aug 30 17:25:17 linux2wwp HylaFAX[25966]: HylaFAX INET Protocol Server:
restarted.
ago 30 17:25:17 linux2wwp hylafax: Avvio hfaxd succeeded
Aug 30 17:25:18 linux2wwp FaxGetty[25913]: CAUGHT SIGNAL 15
Aug 30 17:25:18 linux2wwp FaxGetty[25913]: CLOSE /dev/ttyS0
Aug 30 17:25:18 linux2wwp FaxGetty[25913]: <-- [5:ATH0\r]
Aug 30 17:25:18 linux2wwp FaxGetty[25913]: --> [2:OK]
Aug 30 17:25:18 linux2wwp FaxGetty[25913]: MODEM set DTR OFF
Aug 30 17:25:18 linux2wwp FaxGetty[25975]: OPEN /dev/ttyS0 HylaFAX (tm)
Version 4.1.3
Aug 30 17:25:18 linux2wwp FaxGetty[25975]: MODEM set DTR OFF
Aug 30 17:25:18 linux2wwp FaxGetty[25975]: DELAY 75 ms
Aug 30 17:25:18 linux2wwp FaxGetty[25975]: MODEM set DTR ON
Aug 30 17:25:18 linux2wwp FaxGetty[25975]: DELAY 2600 ms
ago 30 17:25:19 linux2wwp hylafax: Chiusura faxgetty succeeded
Aug 30 17:25:20 linux2wwp FaxGetty[25975]: MODEM set baud rate: 19200 baud,
input flow XON/XOFF, output flow XON/XOFF
Aug 30 17:25:20 linux2wwp FaxGetty[25975]: DELAY 10 ms
Aug 30 17:25:20 linux2wwp FaxGetty[25975]: MODEM flush i/o
Aug 30 17:25:20 linux2wwp FaxGetty[25975]: <-- [4:ATZ\r]
Aug 30 17:25:21 linux2wwp FaxGetty[25975]: --> [2:OK]
Aug 30 17:25:21 linux2wwp FaxGetty[25975]: DELAY 3000 ms
Aug 30 17:25:24 linux2wwp FaxGetty[25975]: <-- [5:ATE0\r]
Aug 30 17:25:24 linux2wwp FaxGetty[25975]: --> [4:ATE0]
Aug 30 17:25:24 linux2wwp FaxGetty[25975]: --> [2:OK]
Aug 30 17:25:24 linux2wwp FaxGetty[25975]: <-- [5:ATV1\r]
Aug 30 17:25:24 linux2wwp FaxGetty[25975]: --> [2:OK]
Aug 30 17:25:24 linux2wwp FaxGetty[25975]: <-- [7:ATQ0X4\r]
Aug 30 17:25:24 linux2wwp FaxGetty[25975]: --> [2:OK]
Aug 30 17:25:24 linux2wwp FaxGetty[25975]: <-- [7:ATS0=0\r]
Aug 30 17:25:25 linux2wwp FaxGetty[25975]: --> [2:OK]
Aug 30 17:25:25 linux2wwp FaxGetty[25975]: <-- [7:ATS8=2\r]
Aug 30 17:25:25 linux2wwp FaxGetty[25975]: --> [2:OK]
Aug 30 17:25:25 linux2wwp FaxGetty[25975]: <-- [8:ATS7=60\r]
Aug 30 17:25:25 linux2wwp FaxGetty[25975]: --> [2:OK]
Aug 30 17:25:25 linux2wwp FaxGetty[25975]: <-- [12:AT&H2&I2&R1\r]
Aug 30 17:25:25 linux2wwp FaxGetty[25975]: --> [2:OK]
Aug 30 17:25:25 linux2wwp FaxGetty[25975]: <-- [11:ATS13=1&D2\r]
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: --> [2:OK]
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: <-- [6:AT&C1\r]
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: --> [2:OK]
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: <-- [12:AT+FCLASS=?\r]
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: --> [7:0,1,2.0]
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: --> [2:OK]
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: MODEM Supports "Data"
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: MODEM Supports "Class 1"
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: MODEM Supports "Class 2.0"
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: <-- [12:AT+FCLASS=1\r]
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: --> [2:OK]
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: MODEM: Mfr USR
Aug 30 17:25:26 linux2wwp FaxGetty[25975]: <-- [5:ATI3\r]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: --> [48:U.S. Robotics Sportster
Flash 56000 Rev. 10.3.80]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: --> [2:OK]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: <-- [5:ATI7\r]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: --> [24:Configuration Profile...]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: --> [37:Product type Italy
External]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: --> [31:Product ID: xx166300]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: --> [38:Options V32bis,V.34+,x2]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: --> [40:Fax Options Class 1/Class
2.0]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: --> [40:Voice Options
Speakerphone, TAD]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: --> [30:Clock Freq 92.0Mhz]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: --> [27:EPROM 256k]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: --> [26:RAM 32k]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: --> [31:FLASH date 10/30/97]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: --> [30:FLASH rev 10.3.80]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: --> [31:DSP date 10/30/97]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: --> [30:DSP rev 10.3.80]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: --> [2:OK]
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: MODEM: Model U.S. Robotics
Sportster Flash 56000 Rev. 10.3.80
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: MODEM: Revision Configuration
Profile... Product type Italy External Product ID: xx166300 Options
V32bis,V.34+,x2 Fax Options Class 1/Class 2.0 Voice Options Speakerphone,
TAD Clock Freq 92.0Mhz EPROM 256k RAM 32k FLASH date 10/30/97 FLASH rev
10.3.80 DSP date 10/30/97 DSP rev 10.3.80
Aug 30 17:25:27 linux2wwp FaxGetty[25975]: <-- [9:AT+FTM=?\r]
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: --> [2:OK]
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports 3.85 line/mm
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports 7.7 line/mm
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports 2400 bit/s
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports 4800 bit/s
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports 7200 bit/s
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports 9600 bit/s
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports 12000 bit/s
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports 14400 bit/s
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports page width 1728
pixels in 215 mm
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports page width 2048
pixels in 255 mm
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports page width 2432
pixels in 303 mm
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports A4 page length
(297 mm)
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports B4 page length
(364 mm)
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports unlimited page
length
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports 1-D MR
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports 2-D MR
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports 0 ms/scanline
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports 5 ms/scanline
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports 10 ms, 5
ms/scanline
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports 10 ms/scanline
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports 20 ms, 10
ms/scanline
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports 20 ms/scanline
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports 40 ms, 20
ms/scanline
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: MODEM Supports 40 ms/scanline
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: <-- [9:AT+FRM=?\r]
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: --> [2:OK]
Aug 30 17:25:28 linux2wwp FaxGetty[25975]: <-- [12:AT+FCLASS=1\r]
Aug 30 17:25:29 linux2wwp FaxGetty[25975]: --> [2:OK]
Aug 30 17:25:29 linux2wwp FaxGetty[25975]: <-- [12:AT+FCLASS=0\r]
Aug 30 17:25:29 linux2wwp FaxGetty[25975]: --> [2:OK]
Aug 30 17:25:29 linux2wwp FaxGetty[25975]: MODEM USR U.S. Robotics Sportster
Flash 56000 Rev. 10.3.80/Configuration Profile... Product type Italy
External Product ID: xx166300 Options V32bis,V.34+,x2 Fax Options Class
1/Class 2.0 Voice Options Speakerphone, TAD Clock Freq 92.0Mhz EPROM 256k
RAM 32k FLASH date 10/30/97 FLASH rev 10.3.80 DSP date 10/30/97 DSP rev
10.3.80
Aug 30 17:25:29 linux2wwp FaxGetty[25975]: <-- [7:ATL3M1\r]
Aug 30 17:25:29 linux2wwp FaxGetty[25975]: --> [2:OK]
Aug 30 17:25:29 linux2wwp FaxGetty[25975]: STATE CHANGE: BASE -> RUNNING
Aug 30 17:25:29 linux2wwp FaxGetty[25975]: MODEM input buffering disabled
ago 30 17:25:46 linux2wwp FaxQueuer[25961]: SUBMIT JOB 11
ago 30 17:25:48 linux2wwp FaxSend[25988]: MODEM set DTR OFF
ago 30 17:25:48 linux2wwp FaxSend[25988]: DELAY 75 ms
ago 30 17:25:48 linux2wwp FaxSend[25988]: MODEM set DTR ON
ago 30 17:25:48 linux2wwp FaxSend[25988]: DELAY 2600 ms
ago 30 17:25:50 linux2wwp FaxSend[25988]: MODEM set baud rate: 19200 baud,
input flow XON/XOFF, output flow XON/XOFF
ago 30 17:25:50 linux2wwp FaxSend[25988]: DELAY 10 ms
ago 30 17:25:50 linux2wwp FaxSend[25988]: MODEM flush i/o
ago 30 17:25:50 linux2wwp FaxSend[25988]: <-- [4:ATZ\r]
ago 30 17:25:50 linux2wwp FaxSend[25988]: --> [2:OK]
ago 30 17:25:50 linux2wwp FaxSend[25988]: DELAY 3000 ms
ago 30 17:25:53 linux2wwp FaxSend[25988]: <-- [5:ATE0\r]
ago 30 17:25:54 linux2wwp FaxSend[25988]: --> [4:ATE0]
ago 30 17:25:54 linux2wwp FaxSend[25988]: --> [2:OK]
ago 30 17:25:54 linux2wwp FaxSend[25988]: <-- [5:ATV1\r]
ago 30 17:25:54 linux2wwp FaxSend[25988]: --> [2:OK]
ago 30 17:25:54 linux2wwp FaxSend[25988]: <-- [7:ATQ0X4\r]
ago 30 17:25:54 linux2wwp FaxSend[25988]: --> [2:OK]
ago 30 17:25:54 linux2wwp FaxSend[25988]: <-- [7:ATS0=0\r]
ago 30 17:25:54 linux2wwp FaxSend[25988]: --> [2:OK]
ago 30 17:25:54 linux2wwp FaxSend[25988]: <-- [7:ATS8=2\r]
ago 30 17:25:55 linux2wwp FaxSend[25988]: --> [2:OK]
ago 30 17:25:55 linux2wwp FaxSend[25988]: <-- [8:ATS7=60\r]
ago 30 17:25:55 linux2wwp FaxSend[25988]: --> [2:OK]
ago 30 17:25:55 linux2wwp FaxSend[25988]: <-- [12:AT&H2&I2&R1\r]
ago 30 17:25:55 linux2wwp FaxSend[25988]: --> [2:OK]
ago 30 17:25:55 linux2wwp FaxSend[25988]: <-- [11:ATS13=1&D2\r]
ago 30 17:25:55 linux2wwp FaxSend[25988]: --> [2:OK]
ago 30 17:25:55 linux2wwp FaxSend[25988]: <-- [6:AT&C1\r]
ago 30 17:25:56 linux2wwp FaxSend[25988]: --> [2:OK]
ago 30 17:25:56 linux2wwp FaxSend[25988]: <-- [12:AT+FCLASS=?\r]
ago 30 17:25:56 linux2wwp FaxSend[25988]: --> [7:0,1,2.0]
ago 30 17:25:56 linux2wwp FaxSend[25988]: --> [2:OK]
ago 30 17:25:56 linux2wwp FaxSend[25988]: MODEM Supports "Data"
ago 30 17:25:56 linux2wwp FaxSend[25988]: MODEM Supports "Class 1"
ago 30 17:25:56 linux2wwp FaxSend[25988]: MODEM Supports "Class 2.0"
ago 30 17:25:56 linux2wwp FaxSend[25988]: <-- [12:AT+FCLASS=1\r]
ago 30 17:25:56 linux2wwp FaxSend[25988]: --> [2:OK]
ago 30 17:25:56 linux2wwp FaxSend[25988]: MODEM: Mfr USR
ago 30 17:25:56 linux2wwp FaxSend[25988]: <-- [5:ATI3\r]
ago 30 17:25:56 linux2wwp FaxSend[25988]: --> [48:U.S. Robotics Sportster
Flash 56000 Rev. 10.3.80]
ago 30 17:25:56 linux2wwp FaxSend[25988]: --> [2:OK]
ago 30 17:25:56 linux2wwp FaxSend[25988]: <-- [5:ATI7\r]
ago 30 17:25:57 linux2wwp FaxSend[25988]: --> [24:Configuration Profile...]
ago 30 17:25:57 linux2wwp FaxSend[25988]: --> [37:Product type Italy
External]
ago 30 17:25:57 linux2wwp FaxSend[25988]: --> [31:Product ID: xx166300]
ago 30 17:25:57 linux2wwp FaxSend[25988]: --> [38:Options V32bis,V.34+,x2]
ago 30 17:25:57 linux2wwp FaxSend[25988]: --> [40:Fax Options Class 1/Class
2.0]
ago 30 17:25:57 linux2wwp FaxSend[25988]: --> [40:Voice Options
Speakerphone, TAD]
ago 30 17:25:57 linux2wwp FaxSend[25988]: --> [30:Clock Freq 92.0Mhz]
ago 30 17:25:57 linux2wwp FaxSend[25988]: --> [27:EPROM 256k]
ago 30 17:25:57 linux2wwp FaxSend[25988]: --> [26:RAM 32k]
ago 30 17:25:57 linux2wwp FaxSend[25988]: --> [31:FLASH date 10/30/97]
ago 30 17:25:57 linux2wwp FaxSend[25988]: --> [30:FLASH rev 10.3.80]
ago 30 17:25:57 linux2wwp FaxSend[25988]: --> [31:DSP date 10/30/97]
ago 30 17:25:57 linux2wwp FaxSend[25988]: --> [30:DSP rev 10.3.80]
ago 30 17:25:57 linux2wwp FaxSend[25988]: --> [2:OK]
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM: Model U.S. Robotics
Sportster Flash 56000 Rev. 10.3.80
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM: Revision Configuration
Profile... Product type Italy External Product ID: xx166300 Options
V32bis,V.34+,x2 Fax Options Class 1/Class 2.0 Voice Options Speakerphone,
TAD Clock Freq 92.0Mhz EPROM 256k RAM 32k FLASH date 10/30/97 FLASH rev
10.3.80 DSP date 10/30/97 DSP rev 10.3.80
ago 30 17:25:57 linux2wwp FaxSend[25988]: <-- [9:AT+FTM=?\r]
ago 30 17:25:57 linux2wwp FaxSend[25988]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
ago 30 17:25:57 linux2wwp FaxSend[25988]: --> [2:OK]
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM Supports 3.85 line/mm
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM Supports 7.7 line/mm
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM Supports 2400 bit/s
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM Supports 4800 bit/s
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM Supports 7200 bit/s
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM Supports 9600 bit/s
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM Supports 12000 bit/s
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM Supports 14400 bit/s
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM Supports page width 1728
pixels in 215 mm
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM Supports page width 2048
pixels in 255 mm
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM Supports page width 2432
pixels in 303 mm
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM Supports A4 page length (297
mm)
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM Supports B4 page length (364
mm)
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM Supports unlimited page
length
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM Supports 1-D MR
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM Supports 2-D MR
ago 30 17:25:57 linux2wwp FaxSend[25988]: MODEM Supports 0 ms/scanline
ago 30 17:25:58 linux2wwp FaxSend[25988]: MODEM Supports 5 ms/scanline
ago 30 17:25:58 linux2wwp FaxSend[25988]: MODEM Supports 10 ms, 5
ms/scanline
ago 30 17:25:58 linux2wwp FaxSend[25988]: MODEM Supports 10 ms/scanline
ago 30 17:25:58 linux2wwp FaxSend[25988]: MODEM Supports 20 ms, 10
ms/scanline
ago 30 17:25:58 linux2wwp FaxSend[25988]: MODEM Supports 20 ms/scanline
ago 30 17:25:58 linux2wwp FaxSend[25988]: MODEM Supports 40 ms, 20
ms/scanline
ago 30 17:25:58 linux2wwp FaxSend[25988]: MODEM Supports 40 ms/scanline
ago 30 17:25:58 linux2wwp FaxSend[25988]: <-- [9:AT+FRM=?\r]
ago 30 17:25:58 linux2wwp FaxSend[25988]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
ago 30 17:25:58 linux2wwp FaxSend[25988]: --> [2:OK]
ago 30 17:25:58 linux2wwp FaxSend[25988]: <-- [12:AT+FCLASS=1\r]
ago 30 17:25:58 linux2wwp FaxSend[25988]: --> [2:OK]
ago 30 17:25:58 linux2wwp FaxSend[25988]: <-- [12:AT+FCLASS=0\r]
ago 30 17:25:59 linux2wwp FaxSend[25988]: --> [2:OK]
ago 30 17:25:59 linux2wwp FaxSend[25988]: MODEM USR U.S. Robotics Sportster
Flash 56000 Rev. 10.3.80/Configuration Profile... Product type Italy
External Product ID: xx166300 Options V32bis,V.34+,x2 Fax Options Class
1/Class 2.0 Voice Options Speakerphone, TAD Clock Freq 92.0Mhz EPROM 256k
RAM 32k FLASH date 10/30/97 FLASH rev 10.3.80 DSP date 10/30/97 DSP rev
10.3.80
ago 30 17:25:59 linux2wwp FaxSend[25988]: <-- [7:ATL3M1\r]
ago 30 17:25:59 linux2wwp FaxSend[25988]: --> [2:OK]
ago 30 17:25:59 linux2wwp FaxSend[25988]: STATE CHANGE: BASE -> RUNNING
ago 30 17:25:59 linux2wwp FaxSend[25988]: MODEM input buffering disabled
ago 30 17:25:59 linux2wwp FaxSend[25988]: SEND FAX: JOB 11 DEST 056424997
COMMID 00000011 DEVICE '/dev/ttyS0'
ago 30 17:26:40 linux2wwp FaxSend[25988]: SEND FAX: JOB 11 SENT in 0:14
Aug 30 17:27:29 linux2wwp FaxGetty[25975]: CAUGHT SIGNAL 15
Aug 30 17:27:29 linux2wwp FaxGetty[25975]: CLOSE /dev/ttyS0
Aug 30 17:27:29 linux2wwp FaxGetty[25975]: <-- [5:ATH0\r]
Aug 30 17:27:34 linux2wwp FaxGetty[25975]: MODEM TIMEOUT: reading line from
modem
Aug 30 17:27:34 linux2wwp FaxGetty[25975]: MODEM <Timeout>
Aug 30 17:27:34 linux2wwp FaxGetty[25975]: MODEM set DTR OFF
Aug 30 17:27:34 linux2wwp FaxGetty[26049]: OPEN /dev/ttyS0 HylaFAX (tm)
Version 4.1.3
Aug 30 17:27:34 linux2wwp FaxGetty[26049]: MODEM set DTR OFF
Aug 30 17:27:34 linux2wwp FaxGetty[26049]: DELAY 75 ms
Aug 30 17:27:34 linux2wwp FaxGetty[26049]: MODEM set DTR ON
Aug 30 17:27:34 linux2wwp FaxGetty[26049]: DELAY 2600 ms
Aug 30 17:27:36 linux2wwp FaxGetty[26049]: MODEM set baud rate: 19200 baud,
input flow XON/XOFF, output flow XON/XOFF
Aug 30 17:27:36 linux2wwp FaxGetty[26049]: DELAY 10 ms
Aug 30 17:27:36 linux2wwp FaxGetty[26049]: MODEM flush i/o
Aug 30 17:27:36 linux2wwp FaxGetty[26049]: <-- [4:ATZ\r]
Aug 30 17:27:37 linux2wwp FaxGetty[26049]: --> [2:OK]
Aug 30 17:27:37 linux2wwp FaxGetty[26049]: DELAY 3000 ms
Aug 30 17:27:40 linux2wwp FaxGetty[26049]: <-- [5:ATE0\r]
Aug 30 17:27:40 linux2wwp FaxGetty[26049]: --> [4:ATE0]
Aug 30 17:27:40 linux2wwp FaxGetty[26049]: --> [2:OK]
Aug 30 17:27:40 linux2wwp FaxGetty[26049]: <-- [5:ATV1\r]
Aug 30 17:27:40 linux2wwp FaxGetty[26049]: --> [2:OK]
Aug 30 17:27:40 linux2wwp FaxGetty[26049]: <-- [7:ATQ0X4\r]
Aug 30 17:27:40 linux2wwp FaxGetty[26049]: --> [2:OK]
Aug 30 17:27:40 linux2wwp FaxGetty[26049]: <-- [7:ATS0=0\r]
Aug 30 17:27:41 linux2wwp FaxGetty[26049]: --> [2:OK]
Aug 30 17:27:41 linux2wwp FaxGetty[26049]: <-- [7:ATS8=2\r]
Aug 30 17:27:41 linux2wwp FaxGetty[26049]: --> [2:OK]
Aug 30 17:27:41 linux2wwp FaxGetty[26049]: <-- [8:ATS7=60\r]
Aug 30 17:27:41 linux2wwp FaxGetty[26049]: --> [2:OK]
Aug 30 17:27:41 linux2wwp FaxGetty[26049]: <-- [12:AT&H2&I2&R1\r]
Aug 30 17:27:41 linux2wwp FaxGetty[26049]: --> [2:OK]
Aug 30 17:27:41 linux2wwp FaxGetty[26049]: <-- [11:ATS13=1&D2\r]
Aug 30 17:27:41 linux2wwp FaxGetty[26049]: --> [2:OK]
Aug 30 17:27:41 linux2wwp FaxGetty[26049]: <-- [6:AT&C1\r]
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: --> [2:OK]
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: <-- [12:AT+FCLASS=?\r]
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: --> [7:0,1,2.0]
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: --> [2:OK]
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: MODEM Supports "Data"
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: MODEM Supports "Class 1"
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: MODEM Supports "Class 2.0"
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: <-- [12:AT+FCLASS=1\r]
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: --> [2:OK]
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: MODEM: Mfr USR
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: <-- [5:ATI3\r]
Aug 30 17:27:42 linux2wwp FaxGetty[26049]: --> [48:U.S. Robotics Sportster
Flash 56000 Rev. 10.3.80]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: --> [2:OK]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: <-- [5:ATI7\r]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: --> [24:Configuration Profile...]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: --> [37:Product type Italy
External]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: --> [31:Product ID: xx166300]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: --> [38:Options V32bis,V.34+,x2]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: --> [40:Fax Options Class 1/Class
2.0]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: --> [40:Voice Options
Speakerphone, TAD]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: --> [30:Clock Freq 92.0Mhz]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: --> [27:EPROM 256k]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: --> [26:RAM 32k]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: --> [31:FLASH date 10/30/97]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: --> [30:FLASH rev 10.3.80]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: --> [31:DSP date 10/30/97]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: --> [30:DSP rev 10.3.80]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: --> [2:OK]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM: Model U.S. Robotics
Sportster Flash 56000 Rev. 10.3.80
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM: Revision Configuration
Profile... Product type Italy External Product ID: xx166300 Options
V32bis,V.34+,x2 Fax Options Class 1/Class 2.0 Voice Options Speakerphone,
TAD Clock Freq 92.0Mhz EPROM 256k RAM 32k FLASH date 10/30/97 FLASH rev
10.3.80 DSP date 10/30/97 DSP rev 10.3.80
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: <-- [9:AT+FTM=?\r]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: --> [2:OK]
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM Supports 3.85 line/mm
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM Supports 7.7 line/mm
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM Supports 2400 bit/s
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM Supports 4800 bit/s
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM Supports 7200 bit/s
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM Supports 9600 bit/s
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM Supports 12000 bit/s
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM Supports 14400 bit/s
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM Supports page width 1728
pixels in 215 mm
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM Supports page width 2048
pixels in 255 mm
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM Supports page width 2432
pixels in 303 mm
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM Supports A4 page length
(297 mm)
Aug 30 17:27:43 linux2wwp FaxGetty[26049]: MODEM Supports B4 page length
(364 mm)
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: MODEM Supports unlimited page
length
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: MODEM Supports 1-D MR
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: MODEM Supports 2-D MR
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: MODEM Supports 0 ms/scanline
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: MODEM Supports 5 ms/scanline
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: MODEM Supports 10 ms, 5
ms/scanline
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: MODEM Supports 10 ms/scanline
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: MODEM Supports 20 ms, 10
ms/scanline
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: MODEM Supports 20 ms/scanline
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: MODEM Supports 40 ms, 20
ms/scanline
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: MODEM Supports 40 ms/scanline
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: <-- [9:AT+FRM=?\r]
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: --> [2:OK]
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: <-- [12:AT+FCLASS=1\r]
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: --> [2:OK]
Aug 30 17:27:44 linux2wwp FaxGetty[26049]: <-- [12:AT+FCLASS=0\r]
Aug 30 17:27:45 linux2wwp FaxGetty[26049]: --> [2:OK]
Aug 30 17:27:45 linux2wwp FaxGetty[26049]: MODEM USR U.S. Robotics Sportster
Flash 56000 Rev. 10.3.80/Configuration Profile... Product type Italy
External Product ID: xx166300 Options V32bis,V.34+,x2 Fax Options Class
1/Class 2.0 Voice Options Speakerphone, TAD Clock Freq 92.0Mhz EPROM 256k
RAM 32k FLASH date 10/30/97 FLASH rev 10.3.80 DSP date 10/30/97 DSP rev
10.3.80
Aug 30 17:27:45 linux2wwp FaxGetty[26049]: <-- [7:ATL3M1\r]
Aug 30 17:27:45 linux2wwp FaxGetty[26049]: --> [2:OK]
Aug 30 17:27:45 linux2wwp FaxGetty[26049]: STATE CHANGE: BASE -> RUNNING
Aug 30 17:27:45 linux2wwp FaxGetty[26049]: MODEM input buffering disabled

I didn't send you the FaxGetty log entries after a FaxSend because there
wasn't nothing else after the line "ago 30 17:26:40 linux2wwp
FaxSend[25988]: SEND FAX: JOB 11 SENT in 0:14".
In this log you can see that I have killed FaxGetty process after the
FaxSend, this is the olny method to re-initialize modem

Sorry for my bad english.



If needed I attach my config.ttyS0

# $Id: usr-xon,v 1.6 2002/04/07 20:29:27 darren Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
#
# Permission to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names
of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
#
#
# Configuration for using the Class 1 command interface with
# a USR Courier or Sportster modem and XON/XOFF flow control.
#
#
CountryCode: 39
AreaCode: 0564
FAXNumber: +39.564.24997
LongDistancePrefix: 00
InternationalPrefix: 00
DialStringRules: etc/dialrules
ServerTracing: 0xFFF
SessionTracing: 11
RecvFileMode: 0600
LogFileMode: 0600
DeviceMode: 0600
RingsBeforeAnswer: 1
SpeakerVolume: high
GettyArgs: "-h %l dx_%s"
LocalIdentifier: "NothingSetup"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%P of %%T"
MaxRecvPages: 25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class1 # use class 1 interface
ModemRate: 19200 # rate for DCE-DTE communication
ModemFlowControl: xonxoff # hardware flow control
#
ModemSetupDTRCmd: ATS13=1&D2 # setup so DTR drop resets modem
ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not)
ModemNoFlowCmd: AT&H0&I0&R1 # setup modem for no flow control
ModemHardFlowCmd: AT&H1&I0&R2 # setup modem for hardware flow control
ModemSoftFlowCmd: AT&H2&I2&R1 # setup modem for software flow control
ModemResultCodesCmd: ATQ0X4 # enable result codes
#
ModemMfrQueryCmd: !USR
ModemModelQueryCmd: ATI3
ModemRevQueryCmd: ATI7 # XXX returns a multi-line result
ModemBaudRateDelay: 10
#
# When AT+FCLASS=1 is issued the modem automatically switches
# to software flow control; these parameters let the fax software
# reset flow control as needed after entering Class 1.
#
Class1NFLOCmd: AT&H0&I0&R1 # setup modem for no flow control
Class1HFLOCmd: AT&H1&I0&R2 # setup modem for hardware flow control
Class1SFLOCmd: "" # modem does this automatically
#
# The remainder of this configuration is included so that the
# modem "idles" in Class 0 while not sending or receiving facsimile.
#
ModemSetupAACmd: AT+FCLASS=0 # leave modem idling in class 0
ModemAnswerCmd: AT+FCLASS=1A # answer in Class 1
#
# Disables the reporting of bad frames by the modem. This
# overcomes a firmware problem in the x2 and V90 Sportsters.
# It is not necessary for the Courier modem.
#
Class2NRCmd: AT+FNR=1,1,1,0



Thank you very much
Nico





----- Original Message -----
From: "Lee Howard" <faxguy@howardsilvan.com>
To: <nico@gruppoerrepi.it>
Cc: <hylafax-user@hylafax.org>
Sent: Friday, August 30, 2002 4:14 PM
Subject: Re: [hylafax-users] Fw: Fw: Problem with state "waiting for modem
to come ready" after sending a fax


> On 2002.08.30 02:49 nico@gruppoerrepi.it wrote:
>
> > It was two days I try to resolve this matter but I can't.
> > My proble is the same I've read in other messages: after sending fax
> > faxgetty don't re-initialize the modem and I can't receive fax until I
> > kill faxgetty (so init re-run it).
>
> Ahem... as always... set ServerTracing to 0xFFF and please send the
> FaxGetty log entries after a FaxSend.
>
> Lee.
>
> ____________________ HylaFAX(tm) Users Mailing List
_______________________
>   To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
>
>


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
Prev by Date: Re: [hylafax-users] Feedback on modems you recommend (easily available for purchase)
Next by Date: Re: [hylafax-users] Fw: Fw: Problem with state "waiting for modem to come ready" after sending a fax
Previous by thread: [hylafax-users] Works perfectly but: modem on /dev/modem appears wedged
Next by thread: Re: [hylafax-users] Hylafax Usage Report:
Index(es):
- Main
- Thread
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services