[hylafax-users] Fw: Fw: Problem with state "waiting for modem to come ready" after sending a fax

[<nico@gruppoerrepi.it>]

Hi Lee,

I'm sorry for my intrusion, I have seen that you are very good with hylafax and you have just analyzed the problem I have met. This problem is following exposed .

 

Thank you for your precious help.

Nico

 

 

 

----- Original Message -----

From: nico@gruppoerrepi.it

To: hylafax-users@hylafax.org

Sent: Friday, August 30, 2002 10:13 AM

Subject: [hylafax-users] Fw: Problem with state "waiting for modem to come ready" after sending a fax

I'm sorry for my insistence but I really need help. I spent many beautiful words for hylafax here in my company, and when I have installed it in a production server it  don't works.

 

Thank you for your help.

 

 

----- Original Message -----

From: nico@gruppoerrepi.it

To: hylafax-users@hylafax.org

Sent: Thursday, August 29, 2002 5:33 PM

Subject: Problem with state "waiting for modem to come ready" after sending a fax

It was two days I try to resolve this matter but I can't.

My proble is the same I've read in other messages: after sending fax faxgetty don't re-initialize the modem and I can't receive fax until I kill faxgetty (so init re-run it).

 

Then I've installed Redhat Linux 7.3 whith hylafax 4.1.3 rpm's in 2 different servers with the same US Robotics 56K faxmodem: an IBM netfinity 3000 and an IBM PC 300GL. The funny is that with the same software installation and the same config.ttySx files the PC 300GL works fine while the netfinity 3000 have the "faxgetty" problem I've just written.

 

I've tried to set the parameter ModemBaudRateDelay to 10 and 1000 but nothing change.

 

I've not applied the "ModemBaudRateDelay" patch because and I don't know how to apply it to the rpm's file that I've installed.

 

I'm deprived of hope, if I can't resolve the problem i think i kill myself.

 

Thanks Nico