Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Waiting for modem to come ready



Title: RE: [hylafax-users] Waiting for modem to come ready

Are you using faxgetty or faxmodem.
Faxmodem will not give you the true state of the modem with faxstat program. http://www.hylafax.org/setup.html#Starting

Bill
-----Original Message-----
From: Sunil William Savkar [mailto:savkar@inthespace.com]
Sent: Sunday, August 25, 2002 1:36 AM
To: hylafax-users@hylafax.org
Subject: [hylafax-users] Waiting for modem to come ready


Hi.

Although hylafax appears to be working fine on my machine, whenever it is
waiting for some action, faxstat produces the following:

Modem ttySHCF0 (+1.718.852.6889): Waiting for modem to come ready

Is this all right?  I find it a bit strange.  In fact, there are a few times
during transmission that a fax may fail due to "no dial tone" but after a few
times finally go through.

I am currently using a Conexant HCF modem which amazingly appears to be
working even though it is a linmodem.

Best regards.

Sunil



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services