Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Waiting for modem to come ready



Are you using faxgetty or faxmodem.
Faxmodem will not give you the true state of the modem with faxstat program. http://www.hylafax.org/setup.html#Starting
 
Bill
-----Original Message-----
From: Sunil William Savkar [mailto:savkar@inthespace.com]
Sent: Sunday, August 25, 2002 1:36 AM
To: hylafax-users@hylafax.org
Subject: [hylafax-users] Waiting for modem to come ready

Hi.

 

Although hylafax appears to be working fine on my machine, whenever it is

waiting for some action, faxstat produces the following:

 

Modem ttySHCF0 (+1.718.852.6889): Waiting for modem to come ready

 

Is this all right?  I find it a bit strange.  In fact, there are a few times

during transmission that a fax may fail due to "no dial tone" but after a few

times finally go through.

 

I am currently using a Conexant HCF modem which amazingly appears to be

working even though it is a linmodem.

 

Best regards.

 

Sunil

 

 

 



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services