[hylafax-users] ODD receptions

[kees <kees@schoen.nl>]

Hi,

I regulary get messages like these :

From: The HylaFAX Receive Agent <fax@xxxxx>
To: FaxMaster@xxxxxx
Subject: facsimile not received

An attempt to receive facsimile on ttyS1 failed because:



    ---- Transcript of session follows ----

Aug 13 22:29:33.47: [23863]: SESSION BEGIN 00001390 3110xxxxxxx
Aug 13 22:29:33.47: [23863]: HylaFAX (tm) Version 4.1.3
Aug 13 22:29:33.47: [23863]: <-- [4:ATA\r]
Aug 13 22:29:41.35: [23863]: --> [5:+FCON]
Aug 13 22:29:41.35: [23863]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS1'
Aug 13 22:29:41.35: [23863]: RECV FAX: begin
Aug 13 22:29:43.39: [23863]: --> [29:+FTSI: "      XXXX - Verkoop"]
Aug 13 22:29:43.39: [23863]: REMOTE TSI "XXXX - Verkoop"
Aug 13 22:29:43.39: [23863]: --> [22:+FDCS: 1,5,0,2,1,0,0,0]
Aug 13 22:29:43.39: [23863]: REMOTE wants 14400 bit/s
Aug 13 22:29:43.39: [23863]: REMOTE wants page width 1728 pixels in 215 mm
Aug 13 22:29:43.39: [23863]: REMOTE wants unlimited page length
Aug 13 22:29:43.39: [23863]: REMOTE wants 7.7 line/mm
Aug 13 22:29:43.39: [23863]: REMOTE wants 2-D MR
Aug 13 22:29:46.83: [23863]: --> [2:OK]
Aug 13 22:29:46.83: [23863]: <-- [7:AT+FDR\r]
Aug 13 22:29:48.49: [23863]: --> [5:+FCFR]
Aug 13 22:29:48.49: [23863]: --> [22:+FDCS: 1,5,0,2,1,0,0,0]
Aug 13 22:29:48.49: [23863]: REMOTE wants 14400 bit/s
Aug 13 22:29:48.49: [23863]: REMOTE wants page width 1728 pixels in 215 mm
Aug 13 22:29:48.49: [23863]: REMOTE wants unlimited page length
Aug 13 22:29:48.49: [23863]: REMOTE wants 7.7 line/mm
Aug 13 22:29:48.49: [23863]: REMOTE wants 2-D MR
Aug 13 22:29:48.92: [23863]: --> [7:CONNECT]
Aug 13 22:29:48.92: [23863]: RECV: begin page
Aug 13 22:29:48.92: [23863]: RECV: send trigger 022
Aug 13 22:30:07.19: [23863]: RECV: 32766 bytes of data, 664 total lines
Aug 13 22:30:25.39: [23863]: RECV: 32766 bytes of data, 1284 total lines
Aug 13 22:30:43.56: [23863]: RECV: 32752 bytes of data, 2132 total lines
Aug 13 22:30:47.21: [23863]: RECV: 6298 bytes of data, 2322 total lines
Aug 13 22:30:47.21: [23863]: --> [8:+FPTS: 1]
Aug 13 22:30:48.51: [23863]: --> [7:+FET: 2]
Aug 13 22:30:48.51: [23863]: RECV recv EOP (no more pages or documents)
Aug 13 22:30:48.51: [23863]: --> [2:OK]
Aug 13 22:30:48.51: [23863]: RECV send MCF (message confirmation)
Aug 13 22:30:48.51: [23863]: RECV FAX (00001390): from XXXX - Verkoop,
page 1
in 1:02, INF, 7.7 line/mm, 2-D MR, 14400 bit/s
Aug 13 22:30:48.53: [23863]: RECV FAX (00001390): recvq/fax00067.tif from
XXXX
- Verkoop, route to <unspecified>, 1 pages in 1:07
Aug 13 22:30:48.53: [23863]: <-- [7:AT+FDR\r]
Aug 13 22:30:52.06: [23863]: --> [8:+FHNG: 0]
Aug 13 22:30:52.06: [23863]: REMOTE HANGUP: Normal and proper end of
connection
(code 0)
Aug 13 22:30:52.06: [23863]: RECV FAX: bin/faxrcvd "recvq/fax00067.tif"
"ttyS1"
"00001390" "" "" ""

-----------------------------------------------------------------------
No error reason in the log.....

Only the 8 byte header in the file.


from my Pine fax-inbox:

N 445 Jul 18 The HylaFAX Receiv    (703) facsimile received from  XXXX -
Verko
  446 Jul 21 The HylaFAX Receiv  (6,154) facsimile not received
  447 Jul 24 The HylaFAX Receiv    (703) facsimile received from  XXXX -
Verko
  448 Jul 25 The HylaFAX Receiv    (703) facsimile received from  XXXX -
Verko
  449 Jul 27 The HylaFAX Receiv    (703) facsimile received from  XXXX -
Verko
  450 Jul 28 The HylaFAX Receiv    (703) facsimile received from
31(0)7036578
  451 Jul 30 The HylaFAX Receiv    (703) facsimile received from  XXXX -
Verko
  452 Aug  1 The HylaFAX Receiv    (701) facsimile received from  XXXX -
Verko
  453 Aug  2 The HylaFAX Receiv    (701) facsimile received from  XXXX -
Verko
  454 Aug  6 The HylaFAX Receiv    (701) facsimile received from  XXXX -
Verko
  455 Aug  8 The HylaFAX Receiv    (701) facsimile received from  XXXX -
Verko
  456 Aug 10 The HylaFAX Receiv    (703) facsimile received from  XXXX -
Verko
  457 Aug 13 The HylaFAX Receiv  (3,059) facsimile not received
^^^^^^^^^^^^  this one is the log from

It _does_ receive quite other faxes (from the same address) without error.

Any idea?

Kees


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*