[hylafax-users] "Failure to receive silence"

[Howard Lowndes <lannet@lannet.com.au>]

I have HylaFax 4.1.3 set up under RedHat 7.1

I can send faxes OK

When I attempt to receive a fax all appears fine until the end when an
error gets logged, the essence of which is:

Aug 11 10:14:31.93: [ 1278]: RECV FAX (00000002): session with
+xxxxxxxxxxx terminated abnormally: Failure to receive silence.
Aug 11 10:14:31.93: [ 1278]: RECV FAX: bin/faxrcvd "recvq/fax00002.tif"
"ttyS0" "00000002" "Failure to receive silence." "" ""
Aug 11 10:14:32.01: [ 1278]: RECV FAX: end

This results in the stated received .tif not being created.  The perms on
the recvq directory are as installed:
drwxr-xr-x    2 uucp     uucp         4096 Aug 11 10:24 recvq/

I also have another problem in as much as the modem reports as:
OK
at+fclass=?
0,1,8

OK

so it gets configures as a Class 1 modem whereas it is probably capable of
Class 2, though it cannot be set as such.
OK
ati1
CD08.55 - 642.56 SERIAL - SPEAKERPHONE 01 - DSP PATCH: 001.65

OK
ati4
CIRRUS LOGIC, INC.  MODEM ENGINEERING  FIRMWARE DEPARTMENT
OK
ati5
Present, 32K DSP RAM.000
Host I/F: Serial
P. Mem. : 008 Bit 001 W.S.
D. Mem  : 008 Bit 001 W.S.
DSP code location = INT ROM
OK
ati6
Australia 61
OK
ati9
CIR3100\00314159\MODEM\PNPC107,ATM0096,TBC3100\56K External Modem[CL]72

OK

Clues?

-- 
Howard.
LANNet Computing Associates - Your Linux people
Contact detail at http://www.lannetlinux.com
"Flatter government, not fatter government." - me
 Get rid of the Australian states.


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*