Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Hylafax4.1.3+DIGI Acceleport RAS8 => receiving 0 lines ?!



On 2002.08.08 09:37 Kabouter Klus wrote:
> Hi,
> 
> I installed Hylafax 4.1.3 on Redhat 7.3 with a Digi
> Acceleport RAS8 card. Receiving from some (older?)
> faxmachines works fine, but from others I receive 0
> lines without reporting any errors (see session
> logs+config) ? I already tried to change flow control
> and even class1, wihout success.
> 
> Any help or working config is really appreciated !

> Aug 07 17:42:54.29: [ 1128]: REMOTE wants 2-D MMR

Unfortunately, HylaFAX cannot currently support sending or receiving in 
MMR, so you'll need to disable this with Class2DCCQueryCmd or by altering 
your ModemAnswerCmd...

ModemAnswerCmd:		"AT+FCC=,,,,1;A"

I do have a patch which allows HylaFAX to use MMR.  It is "fully 
functional" except that for outbound MMR faxes a tagline isn't created 
(illegal in the US) and pagechopping is skiped.  If you wanna play 
guinea-pig, I'll share them.

However, you shouldn't have had the "same" problem with Class 1.  Class 1 
in HylaFAX doesn't ever try to use MMR currently - for receiving or 
sending.

I have an Acceleport RAS 4 which I will be working with next week.  I 
should have some concrete support patches developed soon thereafter.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services