Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] International faxes



I recently recieved 3 faxes from Mexico that show an ID in the tiff file,
but Hylafax did not detect its remote TSI.  I looked at the logs and there
are no errors.

Any suggestions?
I have attached the cover page of the fax and the first few lines of its
corresponding log

Jul 19 06:53:50.92: [ 3021]: SESSION BEGIN 00000061 1XXXXXXXXXX
Jul 19 06:53:50.92: [ 3021]: HylaFAX (tm) Version 4.1.1
Jul 19 06:53:50.92: [ 3021]: <-- [4:ATA\r]
Jul 19 06:53:56.29: [ 3021]: --> [7:CONNECT]
Jul 19 06:53:56.29: [ 3021]: ANSWER: FAX CONNECTION  DEVICE '/dev/modem'
<---- I know this is not recommended, but it worked.

Jul 19 06:53:56.29: [ 3021]: RECV FAX: begin
Jul 19 06:53:56.29: [ 3021]: <-- data [23]
Jul 19 06:53:56.29: [ 3021]: <-- data [2]
Jul 19 06:53:57.93: [ 3021]: --> [7:CONNECT]
Jul 19 06:53:57.93: [ 3021]: <-- data [10]
Jul 19 06:53:57.93: [ 3021]: <-- data [2]
Jul 19 06:53:58.75: [ 3021]: --> [2:OK]
Jul 19 06:53:58.75: [ 3021]: <-- [9:AT+FRH=3\r]
Jul 19 06:53:59.94: [ 3021]: --> [7:CONNECT]
Jul 19 06:54:00.24: [ 3021]: --> [2:OK]
Jul 19 06:54:00.24: [ 3021]: REMOTE wants 14400 bit/s
Jul 19 06:54:00.24: [ 3021]: REMOTE wants page width 1728 pixels in 215 mm
Jul 19 06:54:00.24: [ 3021]: REMOTE wants unlimited page length
Jul 19 06:54:00.24: [ 3021]: REMOTE wants 3.85 line/mm
Jul 19 06:54:00.24: [ 3021]: REMOTE wants 2-D MR
Jul 19 06:54:00.24: [ 3021]: RECV training at v.17 14400 bit/s
Jul 19 06:54:00.24: [ 3021]: <-- [11:AT+FRM=145\r]
Jul 19 06:54:01.97: [ 3021]: --> [7:CONNECT]


example.tif



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services