|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] logs i promised...
here's one of the logs of a fax i've been sending.. same results no matter
what i put for the cover page, and what i send in the document.. wether
the document is text or pdf. The .ps files look great in either case.
I don't seem to get anything from the syslogd, even though i set the log
levels at 0xffffff (did i do it wrong?)
I sure hope someone can help.
Thanks in advance,
jason
Jul 07 11:18:43.27: [ 1685]: SESSION BEGIN 00000013 17029394116
Jul 07 11:18:43.27: [ 1685]: HylaFAX (tm) Version 4.1
Jul 07 11:18:43.27: [ 1685]: SEND FAX: JOB 11 DEST 9394116 COMMID 00000013
Jul 07 11:18:43.27: [ 1685]: DEVICE '/dev/cuaa0'
Jul 07 11:18:43.27: [ 1685]: MODEM set DTR OFF
Jul 07 11:18:43.27: [ 1685]: DELAY 75 ms
Jul 07 11:18:43.36: [ 1685]: MODEM set DTR ON
Jul 07 11:18:43.36: [ 1685]: DELAY 2600 ms
Jul 07 11:18:45.97: [ 1685]: MODEM set baud rate: 19200 baud, input flow XON/XOFF, output flow XON/XOFF
Jul 07 11:18:45.97: [ 1685]: MODEM flush i/o
Jul 07 11:18:45.97: [ 1685]: <-- [4:ATZ\r]
Jul 07 11:18:46.01: [ 1685]: --> [3:ATZ]
Jul 07 11:18:46.01: [ 1685]: --> [2:OK]
Jul 07 11:18:46.01: [ 1685]: <-- [5:ATE0\r]
Jul 07 11:18:46.02: [ 1685]: --> [4:ATE0]
Jul 07 11:18:46.02: [ 1685]: --> [2:OK]
Jul 07 11:18:46.02: [ 1685]: <-- [5:ATV1\r]
Jul 07 11:18:46.03: [ 1685]: --> [2:OK]
Jul 07 11:18:46.03: [ 1685]: <-- [5:ATQ0\r]
Jul 07 11:18:46.04: [ 1685]: --> [2:OK]
Jul 07 11:18:46.04: [ 1685]: <-- [7:ATS0=0\r]
Jul 07 11:18:46.05: [ 1685]: --> [2:OK]
Jul 07 11:18:46.05: [ 1685]: <-- [7:ATS8=2\r]
Jul 07 11:18:46.06: [ 1685]: --> [2:OK]
Jul 07 11:18:46.06: [ 1685]: <-- [8:ATS7=60\r]
Jul 07 11:18:46.07: [ 1685]: --> [2:OK]
Jul 07 11:18:46.07: [ 1685]: <-- [12:AT+FCLASS=1\r]
Jul 07 11:18:46.09: [ 1685]: --> [2:OK]
Jul 07 11:18:46.09: [ 1685]: <-- [5:ATM0\r]
Jul 07 11:18:46.10: [ 1685]: --> [2:OK]
Jul 07 11:18:46.10: [ 1685]: STATE CHANGE: RUNNING -> SENDING
Jul 07 11:18:46.10: [ 1685]: MODEM input buffering enabled
Jul 07 11:18:46.10: [ 1685]: Apply DialString rules to "9394116"
Jul 07 11:18:46.10: [ 1685]: --> return result "9394116"
Jul 07 11:18:46.10: [ 1685]: <-- [12:AT+FCLASS=1\r]
Jul 07 11:18:46.22: [ 1685]: --> [2:OK]
Jul 07 11:18:46.22: [ 1685]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled
Jul 07 11:18:46.22: [ 1685]: DIAL 9394116
Jul 07 11:18:46.22: [ 1685]: <-- [12:ATDT9394116\r]
Jul 07 11:18:55.59: [ 1685]: --> [7:CONNECT]
Jul 07 11:18:55.59: [ 1685]: MODEM input buffering disabled
Jul 07 11:18:57.13: [ 1685]: --> HDLC<25:FF C0 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DC 53>
Jul 07 11:18:57.13: [ 1685]: --> [2:OK]
Jul 07 11:18:57.13: [ 1685]: REMOTE CSI ""
Jul 07 11:18:57.13: [ 1685]: <-- [9:AT+FRH=3\r]
Jul 07 11:18:57.15: [ 1685]: --> [7:CONNECT]
Jul 07 11:18:57.41: [ 1685]: --> HDLC<9:FF C8 01 00 72 1F 00 17 46>
Jul 07 11:18:57.42: [ 1685]: --> [2:OK]
Jul 07 11:18:57.42: [ 1685]: REMOTE best rate 9600 bit/s
Jul 07 11:18:57.42: [ 1685]: REMOTE max page width 1728 pixels in 215 mm
Jul 07 11:18:57.42: [ 1685]: REMOTE max unlimited page length
Jul 07 11:18:57.42: [ 1685]: REMOTE best vres 7.7 line/mm
Jul 07 11:18:57.42: [ 1685]: REMOTE best format 1-D MR
Jul 07 11:18:57.42: [ 1685]: REMOTE best 0 ms/scanline
Jul 07 11:18:57.42: [ 1685]: USE 2400 bit/s
Jul 07 11:18:57.42: [ 1685]: USE 0 ms/scanline
Jul 07 11:18:57.42: [ 1685]: SEND file "docq/doc11.cover;30"
Jul 07 11:18:57.42: [ 1685]: USE page width 1728 pixels in 215 mm
Jul 07 11:18:57.42: [ 1685]: USE unlimited page length
Jul 07 11:18:57.42: [ 1685]: USE 3.85 line/mm
Jul 07 11:18:57.42: [ 1685]: USE 1-D MR
Jul 07 11:18:57.42: [ 1685]: SEND training at v.27ter fallback mode 2400 bit/s
Jul 07 11:18:57.42: [ 1685]: <-- [9:AT+FTH=3\r]
Jul 07 11:18:57.44: [ 1685]: --> [7:CONNECT]
Jul 07 11:18:57.44: [ 1685]: <-- HDLC<23:FF C0 C2 0E AE 2E A6 CA E6 76 96 16 2E F6 72 04 04 04 04 04 04 04 04>
Jul 07 11:18:57.44: [ 1685]: <-- data [23]
Jul 07 11:18:57.44: [ 1685]: <-- data [2]
Jul 07 11:18:59.65: [ 1685]: --> [7:CONNECT]
Jul 07 11:18:59.65: [ 1685]: <-- HDLC<6:FF C8 C1 00 40 1E>
Jul 07 11:18:59.65: [ 1685]: <-- data [6]
Jul 07 11:18:59.65: [ 1685]: <-- data [2]
Jul 07 11:19:00.13: [ 1685]: --> [2:OK]
Jul 07 11:19:00.13: [ 1685]: DELAY 75 ms
Jul 07 11:19:00.22: [ 1685]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
Jul 07 11:19:00.22: [ 1685]: <-- [10:AT+FTM=24\r]
Jul 07 11:19:00.24: [ 1685]: --> [7:CONNECT]
Jul 07 11:19:00.24: [ 1685]: <-- data [450]
Jul 07 11:19:00.24: [ 1685]: <-- data [2]
Jul 07 11:19:02.99: [ 1685]: --> [2:OK]
Jul 07 11:19:02.99: [ 1685]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Jul 07 11:19:02.99: [ 1685]: <-- [9:AT+FRH=3\r]
Jul 07 11:19:03.23: [ 1685]: --> [7:CONNECT]
Jul 07 11:19:04.35: [ 1685]: --> HDLC<5:FF C8 21 57 BE>
Jul 07 11:19:04.35: [ 1685]: --> [2:OK]
Jul 07 11:19:04.35: [ 1685]: TRAINING succeeded
Jul 07 11:19:04.35: [ 1685]: <-- [10:AT+FTM=24\r]
Jul 07 11:19:04.37: [ 1685]: --> [7:CONNECT]
Jul 07 11:19:04.37: [ 1685]: SEND begin page
Jul 07 11:19:04.37: [ 1685]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
Jul 07 11:19:04.37: [ 1685]: <-- data [1041]
Jul 07 11:19:04.37: [ 1685]: <-- data [1032]
Jul 07 11:19:04.37: [ 1685]: <-- data [1033]
Jul 07 11:19:05.26: [ 1685]: <-- data [1031]
Jul 07 11:19:05.26: [ 1685]: <-- data [1046]
Jul 07 11:19:06.33: [ 1685]: <-- data [1038]
Jul 07 11:19:06.33: [ 1685]: <-- data [1055]
Jul 07 11:19:07.39: [ 1685]: <-- data [1048]
Jul 07 11:19:07.39: [ 1685]: <-- data [1049]
Jul 07 11:19:08.46: [ 1685]: <-- data [1051]
Jul 07 11:19:08.46: [ 1685]: <-- data [1033]
Jul 07 11:19:09.52: [ 1685]: <-- data [1024]
Jul 07 11:19:09.52: [ 1685]: <-- data [3]
Jul 07 11:19:09.52: [ 1685]: SENT 12291 bytes of data
Jul 07 11:19:09.52: [ 1685]: SEND 1D RTC
Jul 07 11:19:09.52: [ 1685]: <-- data [29]
Jul 07 11:19:09.52: [ 1685]: <-- data [2]
Jul 07 11:19:10.59: [ 1685]: SEND end page
Jul 07 11:19:13.12: [ 1685]: --> [2:OK]
Jul 07 11:19:13.12: [ 1685]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Jul 07 11:19:13.12: [ 1685]: DELAY 75 ms
Jul 07 11:19:13.21: [ 1685]: SEND send MPS (more pages, same document)
Jul 07 11:19:13.21: [ 1685]: <-- [9:AT+FTH=3\r]
Jul 07 11:19:13.23: [ 1685]: --> [7:CONNECT]
Jul 07 11:19:13.23: [ 1685]: <-- HDLC<3:FF C8 F2>
Jul 07 11:19:13.23: [ 1685]: <-- data [3]
Jul 07 11:19:13.23: [ 1685]: <-- data [2]
Jul 07 11:19:14.90: [ 1685]: --> [2:OK]
Jul 07 11:19:14.90: [ 1685]: <-- [9:AT+FRH=3\r]
Jul 07 11:19:15.17: [ 1685]: --> [7:CONNECT]
Jul 07 11:19:16.28: [ 1685]: --> HDLC<5:FF C8 31 45 8F>
Jul 07 11:19:16.29: [ 1685]: --> [2:OK]
Jul 07 11:19:16.29: [ 1685]: SEND recv MCF (message confirmation)
Jul 07 11:19:16.29: [ 1685]: SEND FAX (00000013): FROM root@foodza.mcmunn.com TO 9394116 (page 1 of 2 sent in 0:19)
Jul 07 11:19:16.29: [ 1685]: SEND FAX (00000013): FROM root@foodza.mcmunn.com TO 9394116 (docq/doc11.cover;30 sent in 0:19)
Jul 07 11:19:16.29: [ 1685]: SEND file "docq/doc21.ps;30"
Jul 07 11:19:16.29: [ 1685]: USE page width 1728 pixels in 215 mm
Jul 07 11:19:16.29: [ 1685]: USE unlimited page length
Jul 07 11:19:16.29: [ 1685]: USE 3.85 line/mm
Jul 07 11:19:16.29: [ 1685]: USE 1-D MR
Jul 07 11:19:16.29: [ 1685]: <-- [10:AT+FTM=24\r]
Jul 07 11:19:16.31: [ 1685]: --> [7:CONNECT]
Jul 07 11:19:16.31: [ 1685]: SEND begin page
Jul 07 11:19:16.31: [ 1685]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
Jul 07 11:19:16.31: [ 1685]: <-- data [1034]
Jul 07 11:19:16.31: [ 1685]: <-- data [1024]
Jul 07 11:19:16.31: [ 1685]: <-- data [1024]
Jul 07 11:19:17.20: [ 1685]: <-- data [1025]
Jul 07 11:19:17.20: [ 1685]: <-- data [1028]
Jul 07 11:19:18.27: [ 1685]: <-- data [1025]
Jul 07 11:19:18.27: [ 1685]: <-- data [256]
Jul 07 11:19:19.33: [ 1685]: SENT 6400 bytes of data
Jul 07 11:19:19.33: [ 1685]: SEND 1D RTC
Jul 07 11:19:19.33: [ 1685]: <-- data [29]
Jul 07 11:19:19.33: [ 1685]: <-- data [2]
Jul 07 11:19:19.33: [ 1685]: SEND end page
Jul 07 11:19:21.98: [ 1685]: --> [2:OK]
Jul 07 11:19:21.98: [ 1685]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Jul 07 11:19:21.98: [ 1685]: DELAY 95 ms
Jul 07 11:19:22.09: [ 1685]: SEND send EOP (no more pages or documents)
Jul 07 11:19:22.09: [ 1685]: <-- [9:AT+FTH=3\r]
Jul 07 11:19:22.11: [ 1685]: --> [7:CONNECT]
Jul 07 11:19:22.11: [ 1685]: <-- HDLC<3:FF C8 F4>
Jul 07 11:19:22.11: [ 1685]: <-- data [3]
Jul 07 11:19:22.11: [ 1685]: <-- data [2]
Jul 07 11:19:23.78: [ 1685]: --> [2:OK]
Jul 07 11:19:23.78: [ 1685]: <-- [9:AT+FRH=3\r]
Jul 07 11:19:24.05: [ 1685]: --> [7:CONNECT]
Jul 07 11:19:25.16: [ 1685]: --> HDLC<5:FF C8 31 45 8F>
Jul 07 11:19:25.17: [ 1685]: --> [2:OK]
Jul 07 11:19:25.17: [ 1685]: SEND recv MCF (message confirmation)
Jul 07 11:19:25.17: [ 1685]: SEND FAX (00000013): FROM root@foodza.mcmunn.com TO 9394116 (page 2 of 2 sent in 0:09)
Jul 07 11:19:25.17: [ 1685]: SEND FAX (00000013): FROM root@foodza.mcmunn.com TO 9394116 (docq/doc21.ps;30 sent in 0:09)
Jul 07 11:19:25.17: [ 1685]: <-- [9:AT+FTH=3\r]
Jul 07 11:19:25.19: [ 1685]: --> [7:CONNECT]
Jul 07 11:19:25.19: [ 1685]: <-- HDLC<3:FF C8 DF>
Jul 07 11:19:25.19: [ 1685]: <-- data [3]
Jul 07 11:19:25.19: [ 1685]: <-- data [2]
Jul 07 11:19:26.87: [ 1685]: --> [2:OK]
Jul 07 11:19:26.87: [ 1685]: MODEM input buffering enabled
Jul 07 11:19:26.87: [ 1685]: <-- [5:ATH0\r]
Jul 07 11:19:27.99: [ 1685]: --> [2:OK]
Jul 07 11:19:27.99: [ 1685]: MODEM set DTR OFF
Jul 07 11:19:27.99: [ 1685]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Jul 07 11:19:27.99: [ 1685]: SESSION END
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
