[hylafax-users] AW: AW: Sending a lot of faxes in a short time?

[Martin Oberle <moberle@gmx.de>]

The version should be 4.1-200. Is there a command
line switch which shows the version? I can't find one.
Maybe thats the problem?

The (numeric)priority is decreasing so
the priority increasing. The initial priority
ist 191.

2182 188 S   root 010780086215  0:2   3:3    16:09 An error occured while tr
2184 188 S   root 010780086571  0:2   3:3    16:09 An error occured while tr
2185 188 S   root 010780088622  0:2   3:3    16:13 An error occured while tr
2186 189 R   root 010780088622  0:2   2:3          An error occured while tr
2187 188 S   root 010780088622  0:2   3:3    16:14 An error occured while tr
2188 189 R   root 010780088622  0:2   2:3          An error occured while tr
2189 190 S   root 010780088622  0:2   1:3          An error occured while tr
2190 190 S   root 010780088622  0:2   1:3          An error occured while tr
2191 191 W   root 010780088648  0:0   0:3
2192 191 W   root 010780088662  0:0   0:3
2193 191 W   root 010780090232  0:0   0:3
2194 191 W   root 010780091115  0:0   0:3
2195 191 W   root 010780091116  0:0   0:3
2196 191 W   root 010780091116  0:0   0:3
2197 191 W   root 010780091116  0:0   0:3
2198 191 W   root 010780091181  0:0   0:3
2199 191 W   root 010780091421  0:0   0:3
2200 191 W   root 010780092515  0:0   0:3



> -----Ursprüngliche Nachricht-----
> Von: hylafax-users-bounce@hylafax.org
> [mailto:hylafax-users-bounce@hylafax.org]Im Auftrag von Giulio Orsero
> Gesendet: Samstag, 6. Juli 2002 12:42
> An: hylafax-users@hylafax.org
> Betreff: Re: [hylafax-users] AW: Sending a lot of faxes in a 
> short time?
> 
> 
> On Sat, 6 Jul 2002 11:58:09 +0200 (MEST), Martin Oberle 
> <moberle@gmx.de>
> wrote:
> 
> >Thanks for your help.
> >I tested -P with some faxes (about 10) from
> >the command line. This worked like expected.
> >After that, I tried ste same commands in a
> >large shell script. About 1000 lines like
> >sendfax -f plancom  -i 88899 -l -k "now +48 hours" -n -P 
> bulk -s a4 -T 3 -d
> >0205553699 /mnt/faxqueue/plancom/fax/88899.tif
> >This works like before
> >Try1, try2, retry1, try3....
> 
> Check sendq/qXXXX for the priority field and see if it get 
> set correctly
> (should be 191 for bulk) and should increase after a failed attempt:
> 
> as submitted:
> priority:191
> schedpri:191
> 
> failed once:
> priority:191
> schedpri:192
> 
> Are you using HylaFAX >= 4.1.1 for all your tests, right? The 
> decreasing
> priority stuff was added in 4.1.1.
> 
> -- 
> giulioo@pobox.com
> 
> ____________________ HylaFAX(tm) Users Mailing List 
> _______________________
>   To subscribe/unsubscribe, click 
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe 
> hylafax-users-request@hylafax.org < /dev/null
> 

-- 
GMX - Die Kommunikationsplattform im Internet.
http://www.gmx.net


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null