Re: [hylafax-users] AW: Sending a lot of faxes in a short time?

[Giulio Orsero <giulioo@pobox.com>]

On Sat, 6 Jul 2002 11:58:09 +0200 (MEST), Martin Oberle <moberle@gmx.de>
wrote:

>Thanks for your help.
>I tested -P with some faxes (about 10) from
>the command line. This worked like expected.
>After that, I tried ste same commands in a
>large shell script. About 1000 lines like
>sendfax -f plancom  -i 88899 -l -k "now +48 hours" -n -P bulk -s a4 -T 3 -d
>0205553699 /mnt/faxqueue/plancom/fax/88899.tif
>This works like before
>Try1, try2, retry1, try3....

Check sendq/qXXXX for the priority field and see if it get set correctly
(should be 191 for bulk) and should increase after a failed attempt:

as submitted:
priority:191
schedpri:191

failed once:
priority:191
schedpri:192

Are you using HylaFAX >= 4.1.1 for all your tests, right? The decreasing
priority stuff was added in 4.1.1.

-- 
giulioo@pobox.com

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null