[hylafax-users] Delay 3000 ms

["Vlad Shalamov" <shalamov@sympatico.ca>]

Hi List.

I'm wondering what is a 3 sec delay modem places between ATZ and ATE
commands:
Jun 25 12:51:08.27: [21455]: DELAY 75 ms
Jun 25 12:51:08.34: [21455]: DELAY 1000 ms
Jun 25 12:51:09.34: [21455]: <-- [4:ATZ\r]
Jun 25 12:51:09.37: [21455]: --> [2:OK]
Jun 25 12:51:09.37: [21455]: DELAY 3000 ms
Jun 25 12:51:12.37: [21455]: <-- [5:ATE0\r]
Jun 25 12:51:12.38: [21455]: --> [4:ATE0]
Jun 25 12:51:12.38: [21455]: --> [2:OK]

I've seen lots of log examples at this list, but I've never seen something
like this delay.
Modem - Comtrol RocketModem II. Here is part of config file:

#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class1          # use this to supply a hint
ModemRate:              19200           # rate for DCE-DTE communication
ModemFlowControl:       rtscts          # default
#
ModemNoFlowCmd:         AT&K0           # setup no flow control
ModemHardFlowCmd:       AT&K3           # setup hardware flow control
ModemSoftFlowCmd:       AT&K4           # setup software flow control
ModemSetupDTRCmd:       AT&D2           # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier (or
not)

ModemDialCmd:           ATDT*67W%s      # Dial *67 and wait for signal
ModemWaitTimeCmd:       ATS7=20         # Wait 20 sec before obtain error:
No carrier
ModemResetDelay:        1000
ModemEchoOffCmd:        ATE0
ModemATCmdDelay:        0       # integer, delay before sending modem an AT
cmd (ms)
ModemBaudRateDelay:     0       # integer, delay (ms) after setting baud
rate
#
ModemMfrQueryCmd:       !Rockwell
ModemModelQueryCmd:     !RC288DPi
ModemRevQueryCmd:       ATI3            # product information

Could someone explain for me about this delay and how I can change it?

Thanks in advance,
Vlad Shalamov.


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null