Re: [hylafax-users] ISDN PRI cards

[Lee Howard <faxguy@deanox.com>]

On 2002.06.20 09:35 Jay R. Ashworth wrote:
> On Thu, Jun 20, 2002 at 06:56:50PM +0300, Sedat Yilmazer wrote:
> >    There must be a way to get the called number Id (the destination
> > number dialed) from the board. If I can get the dialed number, I can
> > define almost any number of logical ports on that board (though I can
> > get only 30 faxes at a time.) So is there a way in Hylafax to get the
> > called number from an ISDN modem port on eicon? ( This can also be used
> > for DID fax routing )
> 
> Yep.  And that's the keyword to search the archives with.  Yan has done
> this, I believe.  Not sure whether the necessary patches are mainline
> or not yet.

HylaFAX should be able to handle DID/DNIS now.  The patches were back with 
4.1.1.  However, since there are so few people actually using it... it's 
hard to say it works with every product.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null