[hylafax-users] No carrier detected Zyxel Elite 2864I

["Gianluca Simoni" <gianluca.simoni@cstnet.it>]

Hi,

            I’m using  hylafax  4.1beta2 server on a Linux SuSE 7.2 machine. I use a Zyxel Elite 2864I  (MODEM ZYXEL E2864/V 3.00a).

When I try to send a fax I always receive this message “No carrier detected”

I try also with Hylafax 4.1.2 but the result no change.

The modem and the isdn plug are OK (I’ve used both to connect to an internet provider).

This is the log file:

 

Jun  3 12:07:34 sinfax FaxSend[12414]: DELAY 75 ms

Jun  3 12:07:34 sinfax FaxSend[12414]: DELAY 2600 ms

Jun  3 12:07:37 sinfax FaxSend[12414]: <-- [4:ATZ\r]

Jun  3 12:07:37 sinfax FaxGetty[11993]: ANSWER: Can not lock modem device

Jun  3 12:07:37 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:37 sinfax FaxSend[12414]: DELAY 3000 ms

Jun  3 12:07:40 sinfax FaxSend[12414]: <-- [19:AT&B1&N0&S0S38.3=1\r]

Jun  3 12:07:40 sinfax FaxSend[12414]: --> [18:AT&B1&N0&S0S38.3=1]

Jun  3 12:07:40 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:40 sinfax FaxSend[12414]: <-- [5:ATE0\r]

Jun  3 12:07:40 sinfax FaxSend[12414]: --> [4:ATE0]

Jun  3 12:07:40 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:40 sinfax FaxSend[12414]: <-- [5:ATV1\r]

Jun  3 12:07:41 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:41 sinfax FaxSend[12414]: <-- [5:ATQ0\r]

Jun  3 12:07:41 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:41 sinfax FaxSend[12414]: <-- [7:ATS0=0\r]

Jun  3 12:07:41 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:41 sinfax FaxSend[12414]: <-- [7:ATS8=2\r]

Jun  3 12:07:41 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:41 sinfax FaxSend[12414]: <-- [8:ATS7=60\r]

Jun  3 12:07:41 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:41 sinfax FaxSend[12414]: <-- [6:AT&H3\r]

Jun  3 12:07:41 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:41 sinfax FaxSend[12414]: <-- [6:AT&D2\r]

Jun  3 12:07:41 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:41 sinfax FaxSend[12414]: <-- [6:AT&C1\r]

Jun  3 12:07:41 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:41 sinfax FaxSend[12414]: <-- [12:AT+FCLASS=?\r]

Jun  3 12:07:41 sinfax FaxSend[12414]: --> [15:0,1,2,2.0,6,8,Z]

Jun  3 12:07:41 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:41 sinfax FaxSend[12414]: <-- [14:AT+FCLASS=2.0\r]

Jun  3 12:07:42 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:42 sinfax FaxSend[12414]: <-- [8:AT+FMI?\r]

Jun  3 12:07:42 sinfax FaxSend[12414]: --> [5:ZyXEL]

Jun  3 12:07:42 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:42 sinfax FaxSend[12414]: <-- [8:AT+FMM?\r]

Jun  3 12:07:42 sinfax FaxSend[12414]: --> [18:E2864  V 3.00a    ]

Jun  3 12:07:42 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:42 sinfax FaxSend[12414]: <-- [8:AT+FMR?\r]

Jun  3 12:07:42 sinfax FaxSend[12414]: --> [18:E2864  V 3.00a    ]

Jun  3 12:07:42 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:42 sinfax FaxSend[12414]: <-- [9:AT+FCC=?\r]

Jun  3 12:07:42 sinfax FaxSend[12414]: --> [43:(0,1),(0-5),(0-2),(0-2),(0,1),(0),(0),(0-7)]

Jun  3 12:07:42 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:42 sinfax FaxSend[12414]: <-- [9:AT+FCQ=?\r]

Jun  3 12:07:42 sinfax FaxSend[12414]: --> [11:(0-2),(0-2)]

Jun  3 12:07:42 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:42 sinfax FaxSend[12414]: <-- [9:AT+FAP=?\r]

Jun  3 12:07:42 sinfax FaxSend[12414]: --> [5:ERROR]

Jun  3 12:07:42 sinfax FaxSend[12414]: <-- [9:AT+FSP=?\r]

Jun  3 12:07:43 sinfax FaxSend[12414]: --> [3:0,1]

Jun  3 12:07:43 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:43 sinfax FaxSend[12414]: <-- [14:AT+FCLASS=2.0\r]

Jun  3 12:07:43 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:43 sinfax FaxSend[12414]: <-- [9:AT+FLO=2\r]

Jun  3 12:07:43 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:43 sinfax FaxSend[12414]: <-- [9:AT+FPP=0\r]

Jun  3 12:07:43 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:43 sinfax FaxSend[12414]: <-- [9:AT+FBO=0\r]

Jun  3 12:07:43 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:43 sinfax FaxSend[12414]: <-- [10:AT+FCT=30\r]

Jun  3 12:07:43 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:43 sinfax FaxSend[12414]: <-- [15:AT+FNR=1,1,1,1\r]

Jun  3 12:07:43 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:43 sinfax FaxSend[12414]: <-- [9:AT+FIE=0\r]

Jun  3 12:07:43 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:43 sinfax FaxSend[12414]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]

Jun  3 12:07:44 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:44 sinfax FaxSend[12414]: MODEM ZYXEL E2864/V 3.00a

Jun  3 12:07:44 sinfax FaxSend[12414]: <-- [5:ATM0\r]

Jun  3 12:07:44 sinfax FaxSend[12414]: --> [2:OK]

Jun  3 12:07:44 sinfax FaxSend[12414]: SEND FAX: JOB 4 DEST 029036101 COMMID 00000007 DEVICE '/dev/ttyS0'

Jun  3 12:08:21 sinfax FaxSend[12414]: SEND FAILED: JOB 4 DEST 029036101 ERR No carrier detected

 

I’ve use this template for Zyxel 2864I :

 

 

CountryCode:                39

AreaCode:                    2

FAXNumber:                 +39.05.45.85.75.06

LongDistancePrefix:      5

InternationalPrefix:         011

DialStringRules:            etc/dialrules

ServerTracing:               2095

SessionTracing:            2095

RecvFileMode:              0644

LogFileMode:                0644

DeviceMode:                 0600

RingsBeforeAnswer:      1

SpeakerVolume:                       on

GettyArgs:                    "-h %l dx_%s"

LocalIdentifier:   "CSTNet"

LogFacility:                   user

TagLineFont:                 etc/lutRS18.pcf

TagLineFormat:             "From %%l|%c|Page %%p of %%t"

NoCarrierRetrys:           3

MaxRecvPages:                        100

#

#

# Modem-related stuff: should reflect modem command interface

# and hardware connection/cabling (e.g. flow control).

#

ModemType:                 Class2.0           # use class 2.0 interface

ModemRate:                 38400               # 38.4 works fine

ModemFlowControl:       rtscts               # default

 

 

#

ModemNoFlowCmd:      AT&H0             # disable flow control

ModemHardFlowCmd:   AT&H3             # hardware flow control

ModemSoftFlowCmd:    AT&H4             # software flow control

ModemSetupDTRCmd:  AT&D2             # DTR off causes modem to hang up

ModemSetupDCDCmd:  AT&C1             # DCD tracks carrier

#

ModemSetupAACmd:    AT+FAA=1       # enable in current class

ModemResetCmds:                  AT&B1&N0&S0S18=4S38.3=1

 

#

ModemDialCmd:                       ATDT0*%s                    # no '@' 'cuz then busy not recognized

 

NoCarrierRetrys:           3                      # retry 3 times on no carrier

#

ModemSetVolumeCmd: "ATM0 ATM1L1 ATM1L3 ATM1L5 ATM1L7"

#

# Caller ID configuration setup.

#

#QualifyCID:                 etc/cid              # CID access control list file

#CIDNumber:                "CALLER NUMBER: " # pattern string for phone number info

#CIDName:                   "CALLER NAME: "        # pattern string for identity info

#

PagerSetupCmds:                     AT&K0&N15     # use V.22 at 1200 bps (PageNet)

 

 

 

I’ve read the mailing list archive but I’ve not found the answer.

Can  anyone help me ?

 

Thanks.

 

 

 

 

 

*************************************************

 

Gianluca Simoni

e-mail      gianluca.simoni@cstnet.it

 

*************************************************