Re: [hylafax-users] Modem Speed

[Lee Howard <faxguy@deanox.com>]

On 2002.05.15 09:31 Thom Paine wrote:
> I have a site that I think has poor quality phone lines. The faxes
> sometimes come through, but more often than not, they error out.
> 
> I have a USR Hardware Modem (5610) in the server, and one in my server
> on the receiving end. How would I go about configuring these to only use
> 9600 baud on a send and receive?

If you're running Class 2.0 (not recommended), then you can use 
Class2DCCQueryCmd to force a lower br value than is default.

If you're running Class 1, then try using Class2DCCQueryCmd also (look at 
the code and you'll see that Class 1 generates a pseudo-capabilities 
string like this), but I'm not sure if it will read the value in or not.  
So, you could use a DesiredBR in DestControls for sending.  This wouldn't 
do what you want for receiving, though.  Note also: 
http://bugs.hylafax.org/bugzilla/show_bug.cgi?id=259

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null