|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] No response to MPS or EOP repeated 3 tries
Lee Howard wrote:
> On 2002.04.18 03:21 Paul van der Vlis wrote:
>
>> I did run "faxaddmodem" on the Zyxel to let it use class 1, but after
>> that it does not answer the phone anymore (modem is ringing, faxgetty
>> does not answer). When I take a look at the configuration file, it's a
>> "generic class 1 modem configuration file".
>
>
> Set ServerTracing to 0xFFF and send the relevant parts of the system log
> showing faxgetty.
>
> Send also the "configuration file" and the output of probemodem <device>.
>
> Lee.
Hello!
This is the log (the isdn-messages other then from "faxgetty" are coming
from another ISDN adapter).
Thanks for your support!
with regards,
Paul van der Vlis.
------
Apr 18 17:22:46 server -- MARK --
Apr 18 17:31:03 server FaxGetty[28077]: CAUGHT SIGNAL 15
Apr 18 17:31:03 server FaxGetty[28077]: CLOSE /dev/ttyS0
Apr 18 17:31:03 server FaxGetty[29002]: OPEN /dev/ttyS0
Apr 18 17:31:03 server FaxGetty[29002]: Purge stale UUCP lock
/var/lock/LCK..ttyS0
Apr 18 17:31:03 server FaxGetty[29002]: MODEM set DTR OFF
Apr 18 17:31:03 server FaxGetty[29002]: DELAY 75 ms
Apr 18 17:31:03 server FaxGetty[29002]: MODEM set DTR ON
Apr 18 17:31:03 server FaxGetty[29002]: DELAY 2600 ms
Apr 18 17:31:06 server FaxGetty[29002]: MODEM set baud rate: 19200 baud,
input flow XON/XOFF, output flow XON/XOFF
Apr 18 17:31:06 server FaxGetty[29002]: MODEM flush i/o
Apr 18 17:31:06 server FaxGetty[29002]: <-- [4:ATZ\r]
Apr 18 17:31:36 server FaxGetty[29002]: MODEM TIMEOUT: reading line from
modem
Apr 18 17:31:36 server FaxGetty[29002]: MODEM <Timeout>
Apr 18 17:31:36 server FaxGetty[29002]: MODEM set DTR OFF
Apr 18 17:31:36 server FaxGetty[29002]: DELAY 75 ms
Apr 18 17:31:36 server FaxGetty[29002]: MODEM set DTR ON
Apr 18 17:31:36 server FaxGetty[29002]: DELAY 2600 ms
Apr 18 17:31:39 server FaxGetty[29002]: MODEM set baud rate: 19200 baud,
input flow XON/XOFF, output flow XON/XOFF
Apr 18 17:31:39 server FaxGetty[29002]: MODEM flush i/o
Apr 18 17:31:39 server FaxGetty[29002]: <-- [4:ATZ\r]
Apr 18 17:31:39 server FaxGetty[29002]: --> [4:PUA«ø]
Apr 18 17:31:39 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:31:39 server FaxGetty[29002]: <-- [5:ATE0\r]
Apr 18 17:31:39 server FaxGetty[29002]: --> [4:ATE0]
Apr 18 17:31:39 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:31:39 server FaxGetty[29002]: <-- [5:ATV1\r]
Apr 18 17:31:39 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:31:39 server FaxGetty[29002]: <-- [5:ATQ0\r]
Apr 18 17:31:39 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:31:39 server FaxGetty[29002]: <-- [7:ATS0=0\r]
Apr 18 17:31:39 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:31:39 server FaxGetty[29002]: <-- [7:ATS8=2\r]
Apr 18 17:31:39 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:31:39 server FaxGetty[29002]: <-- [8:ATS7=60\r]
Apr 18 17:31:40 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:31:40 server FaxGetty[29002]: <-- [12:AT+FCLASS=?\r]
Apr 18 17:31:40 server FaxGetty[29002]: --> [15:0,1,2,2.0,6,8,Z]
Apr 18 17:31:40 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports "Data"
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports "Class 1"
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports "Class 2"
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports "Class 2.0"
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports "Voice"
Apr 18 17:31:40 server FaxGetty[29002]: <-- [12:AT+FCLASS=1\r]
Apr 18 17:31:40 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:31:40 server FaxGetty[29002]: <-- [5:ATI3\r]
Apr 18 17:31:40 server FaxGetty[29002]: --> [35:ZyXEL ISDN MODEM LINK
STATUS REPORT]
Apr 18 17:31:40 server FaxGetty[29002]: --> [24:Connect DTE Speed : ]
Apr 18 17:31:40 server FaxGetty[29002]: --> [24:Error Control Level : ]
Apr 18 17:31:40 server FaxGetty[29002]: --> [24:Protocol Link Speed : ]
Apr 18 17:31:40 server FaxGetty[29002]: --> [24:Cause : ]
Apr 18 17:31:40 server FaxGetty[29002]: --> [25:Cause Value : 0]
Apr 18 17:31:40 server FaxGetty[29002]: --> [25:Bytes Received : 0]
Apr 18 17:31:40 server FaxGetty[29002]: --> [25:Bytes Sent : 0]
Apr 18 17:31:40 server FaxGetty[29002]: --> [25:HDLC FCS Error : 0]
Apr 18 17:31:40 server FaxGetty[29002]: --> [25:HDLC Receive Overrun : 0]
Apr 18 17:31:40 server FaxGetty[29002]: --> [25:HDLC Transmit Underrun: 0]
Apr 18 17:31:40 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:31:40 server FaxGetty[29002]: MODEM: Mfr ZyXEL ISDN MODEM LINK
STATUS REPORT Connect DTE Speed : Error Control Apr 18 17:31:40
server FaxGetty[29002]: <-- [5:ATI0\r]
Apr 18 17:31:40 server FaxGetty[29002]: --> [5:28642]
Apr 18 17:31:40 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:31:40 server FaxGetty[29002]: MODEM: Model 28642
Apr 18 17:31:40 server FaxGetty[29002]: <-- [9:AT+FTM=?\r]
Apr 18 17:31:40 server FaxGetty[29002]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Apr 18 17:31:40 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports 3.85 line/mm
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports 7.7 line/mm
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports 2400 bit/s
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports 4800 bit/s
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports 7200 bit/s
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports 9600 bit/s
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports 12000 bit/s
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports 14400 bit/s
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports page width 1728
pixels in 215 mm
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports page width 2048
pixels in 255 mm
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports page width 2432
pixels in 303 mm
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports A4 page length
(297 mm)
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports B4 page length
(364 mm)
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports unlimited page
length
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports 1-D MR
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports 2-D MR
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports 0 ms/scanline
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports 5 ms/scanline
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports 10 ms, 5 ms/scanline
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports 10 ms/scanline
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports 20 ms, 10 ms/scanline
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports 20 ms/scanline
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports 40 ms, 20 ms/scanline
Apr 18 17:31:40 server FaxGetty[29002]: MODEM Supports 40 ms/scanline
Apr 18 17:31:40 server FaxGetty[29002]: <-- [9:AT+FRM=?\r]
Apr 18 17:31:40 server FaxGetty[29002]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Apr 18 17:31:40 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:31:40 server FaxGetty[29002]: <-- [12:AT+FCLASS=1\r]
Apr 18 17:31:41 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:31:41 server FaxGetty[29002]: MODEM ZYXEL ISDN MODEM LINK
STATUS REPORT CONNECT DTE SPEED : ERROR CONTROL LEVELApr 18 17:31:41
server FaxGetty[29002]: <-- [7:ATL0M1\r]
Apr 18 17:31:41 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:31:41 server FaxGetty[29002]: STATE CHANGE: BASE -> RUNNING
Apr 18 17:31:41 server FaxGetty[29002]: MODEM input buffering disabled
Apr 18 17:32:48 server kernel: isdn_net: Incoming call without OAD,
assuming '0'
Apr 18 17:32:48 server kernel: isdn_net: call from 0,1,0 -> 503110867
Apr 18 17:32:48 server kernel: isdn_net: Service-Indicator not 7, ignored
Apr 18 17:32:48 server kernel: isdn_tty: Incoming call without OAD,
assuming '0'
Apr 18 17:32:48 server kernel: isdn_tty: call from 0 -> 503110867 ignored
Apr 18 17:32:48 server isdnlog: Apr 18 17:32:48 * Call to tei 127 from ?
on +31 50/3110867, Groningen RING (3.1 kHz audio)
Apr 18 17:32:48 server FaxGetty[29002]: STATE CHANGE: RUNNING -> LISTENING
Apr 18 17:32:48 server FaxGetty[29002]: MODEM input buffering enabled
Apr 18 17:32:48 server FaxGetty[29002]: --> [4:RING]
Apr 18 17:32:48 server FaxGetty[29002]: MODEM ring left 0 RING
Apr 18 17:32:54 server FaxGetty[29002]: --> [12:TO:503110867]
Apr 18 17:32:54 server FaxGetty[29002]: MODEM CID TO:503110867 /
TO:503110867
Apr 18 17:32:54 server FaxGetty[29002]: --> [4:RING]
Apr 18 17:32:54 server FaxGetty[29002]: MODEM ring left 0 RING
Apr 18 17:32:54 server FaxGetty[29002]: ANSWER: CID NUMBER
"TO:503110867" NAME "TO:503110867"
Apr 18 17:33:00 server FaxGetty[29002]: --> [4:RING]
Apr 18 17:33:00 server FaxGetty[29002]: MODEM ring left 0 RING
Apr 18 17:33:05 server FaxGetty[29002]: --> [4:RING]
Apr 18 17:33:05 server FaxGetty[29002]: MODEM ring left 0 RING
Apr 18 17:33:05 server isdnlog: Apr 18 17:33:05 Call to tei 97 from ? on
+31 50/3110867, Groningen CONNECT (3.1 kHz audio)
Apr 18 17:33:05 server isdnlog: Apr 18 17:33:05 tei 80 calling ? with
? Time:Thu Apr 18 17:33:01 2002
Apr 18 17:33:05 server isdnlog: Apr 18 17:33:05 tei 80 calling ? with
? COLP *INVALID* -- ignored!
Apr 18 17:33:05 server isdnlog: Apr 18 17:33:05 tei 80 calling ? with
? CONNECT
Apr 18 17:33:07 server FaxGetty[29002]: --> [10:NO CARRIER]
Apr 18 17:33:07 server FaxGetty[29002]: <-- [5:ATH0\r]
Apr 18 17:33:07 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:33:07 server FaxGetty[29002]: MODEM set DTR OFF
Apr 18 17:33:07 server FaxGetty[29002]: MODEM set DTR OFF
Apr 18 17:33:07 server FaxGetty[29002]: DELAY 75 ms
Apr 18 17:33:07 server FaxGetty[29002]: MODEM set DTR ON
Apr 18 17:33:07 server FaxGetty[29002]: DELAY 2600 ms
Apr 18 17:33:09 server isdnlog: Apr 18 17:33:09 tei 80 calling ? with
? Normal call clearing (User)
Apr 18 17:33:09 server isdnlog: Apr 18 17:33:09 Call to tei 97 from ? on
+31 50/3110867, Groningen Normal call clearing (UseApr 18 17:33:09
server isdnlog: Apr 18 17:33:09 Call to tei 97 from ? on +31 50/3110867,
Groningen HANGUP ( 0:00:04)
Apr 18 17:33:09 server FaxGetty[29002]: MODEM set baud rate: 19200 baud,
input flow XON/XOFF, output flow XON/XOFF
Apr 18 17:33:09 server FaxGetty[29002]: MODEM flush i/o
Apr 18 17:33:09 server FaxGetty[29002]: <-- [4:ATZ\r]
Apr 18 17:33:10 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:33:10 server FaxGetty[29002]: <-- [5:ATE0\r]
Apr 18 17:33:10 server FaxGetty[29002]: --> [4:ATE0]
Apr 18 17:33:10 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:33:10 server FaxGetty[29002]: <-- [5:ATV1\r]
Apr 18 17:33:10 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:33:10 server FaxGetty[29002]: <-- [5:ATQ0\r]
Apr 18 17:33:10 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:33:10 server FaxGetty[29002]: <-- [7:ATS0=0\r]
Apr 18 17:33:10 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:33:10 server FaxGetty[29002]: <-- [7:ATS8=2\r]
Apr 18 17:33:10 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:33:10 server FaxGetty[29002]: <-- [8:ATS7=60\r]
Apr 18 17:33:10 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:33:10 server FaxGetty[29002]: <-- [12:AT+FCLASS=?\r]
Apr 18 17:33:10 server FaxGetty[29002]: --> [15:0,1,2,2.0,6,8,Z]
Apr 18 17:33:10 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:33:10 server FaxGetty[29002]: MODEM Supports "Data"
Apr 18 17:33:10 server FaxGetty[29002]: MODEM Supports "Class 1"
Apr 18 17:33:10 server FaxGetty[29002]: MODEM Supports "Class 2"
Apr 18 17:33:10 server FaxGetty[29002]: MODEM Supports "Class 2.0"
Apr 18 17:33:10 server FaxGetty[29002]: MODEM Supports
Apr 18 17:33:10 server FaxGetty[29002]: MODEM Supports "Voice"
Apr 18 17:33:10 server FaxGetty[29002]: <-- [12:AT+FCLASS=1\r]
Apr 18 17:33:11 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:33:11 server FaxGetty[29002]: <-- [5:ATI3\r]
Apr 18 17:33:11 server FaxGetty[29002]: --> [35:ZyXEL ISDN MODEM LINK
STATUS REPORT]
Apr 18 17:33:11 server FaxGetty[29002]: --> [24:Connect DTE Speed : ]
Apr 18 17:33:11 server FaxGetty[29002]: --> [24:Error Control Level : ]
Apr 18 17:33:11 server FaxGetty[29002]: --> [24:Protocol Link Speed : ]
Apr 18 17:33:11 server FaxGetty[29002]: --> [50:Cause :
Non-selected user clearing]
Apr 18 17:33:11 server FaxGetty[29002]: --> [26:Cause Value : 26]
Apr 18 17:33:11 server FaxGetty[29002]: --> [25:Bytes Received : 0]
Apr 18 17:33:11 server FaxGetty[29002]: --> [25:Bytes Sent : 0]
Apr 18 17:33:11 server FaxGetty[29002]: --> [25:HDLC FCS Error : 0]
Apr 18 17:33:11 server FaxGetty[29002]: --> [25:HDLC Receive Overrun : 0]
Apr 18 17:33:11 server FaxGetty[29002]: --> [25:HDLC Transmit Underrun: 0]
Apr 18 17:33:11 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:33:11 server FaxGetty[29002]: MODEM: Mfr ZyXEL ISDN MODEM LINK
STATUS REPORT Connect DTE Speed : Error Control Apr 18 17:33:11
server FaxGetty[29002]: <-- [5:ATI0\r]
Apr 18 17:33:11 server FaxGetty[29002]: --> [5:28642]
Apr 18 17:33:11 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:33:11 server FaxGetty[29002]: MODEM: Model 28642
Apr 18 17:33:11 server FaxGetty[29002]: <-- [9:AT+FTM=?\r]
Apr 18 17:33:11 server FaxGetty[29002]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Apr 18 17:33:11 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports 3.85 line/mm
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports 7.7 line/mm
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports 2400 bit/s
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports 4800 bit/s
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports 7200 bit/s
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports 9600 bit/s
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports 12000 bit/s
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports 14400 bit/s
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports page width 1728
pixels in 215 mm
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports page width 2048
pixels in 255 mm
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports page width 2432
pixels in 303 mm
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports A4 page length
(297 mm)
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports B4 page length
(364 mm)
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports unlimited page
length
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports 1-D MR
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports 2-D MR
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports 0 ms/scanline
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports 5 ms/scanline
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports 10 ms, 5 ms/scanline
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports 10 ms, 5 ms/scanline
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports 10 ms/scanline
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports 20 ms, 10 ms/scanline
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports 20 ms/scanline
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports 40 ms, 20 ms/scanline
Apr 18 17:33:11 server FaxGetty[29002]: MODEM Supports 40 ms/scanline
Apr 18 17:33:11 server FaxGetty[29002]: <-- [9:AT+FRM=?\r]
Apr 18 17:33:11 server isdnlog: Apr 18 17:33:11 tei 80 calling ? with
? Normal call clearing (User)
Apr 18 17:33:11 server isdnlog: Apr 18 17:33:11 tei 80 calling ? with
? HANGUP ( 0:00:06)
Apr 18 17:33:11 server FaxGetty[29002]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Apr 18 17:33:11 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:33:11 server FaxGetty[29002]: <-- [12:AT+FCLASS=1\r]
Apr 18 17:33:11 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:33:11 server FaxGetty[29002]: MODEM ZYXEL ISDN MODEM LINK
STATUS REPORT CONNECT DTE SPEED : ERROR CONTROL LEVELApr 18 17:33:11
server FaxGetty[29002]: <-- [7:ATL0M1\r]
Apr 18 17:33:11 server FaxGetty[29002]: --> [2:OK]
Apr 18 17:33:11 server FaxGetty[29002]: STATE CHANGE: LISTENING -> RUNNING
Apr 18 17:33:11 server FaxGetty[29002]: MODEM input buffering disabled
Apr 18 17:36:24 server isdnlog: Apr 18 17:36:24 * Call to tei 127 from ?
on +31 50/3110867, Groningen RING (3.1 kHz audio)
-----------
And this is the configuration file:
------------
# $Id: class1,v 1.4 2001/05/21 04:31:28 darren Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
#
# Permission to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the
names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
#
#
# Generic Class 1 modem configuration.
#
# EDIT THIS CONFIGURATION TO REFLECT YOUR SETUP
#
CountryCode: 31
AreaCode: 50
FAXNumber: 3110867
LongDistancePrefix: 0
InternationalPrefix: 00
DialStringRules: etc/dialrules.europe
ServerTracing: 0xFFF
SessionTracing: 1
RecvFileMode: 0600
LogFileMode: 0600
DeviceMode: 0600
RingsBeforeAnswer: 0
SpeakerVolume: quiet
GettyArgs: ""
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class1 # use this to supply a hint
#ModemRate: 19200 # rate for DCE-DTE communication
#ModemFlowControl: xonxoff # XON/XOFF flow control assumed
#
#ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem
#ModemSetupDCDCmd: AT&C1 # setup so DCD follows carrier
#GettyArgs: "-h %l dx_%s" # modem must auto-detect fax/data
#
# We normally append the "@" symbol to the dial string so that
# the modem will wait 5 seconds before attempting to connect
# and return result codes that distinguish between no carrier
# and no answer. This makes it possible to avoid problems with
# repeatedly dialing a number that doesn't have a fax machine
# (kudos to Stuart Lynne for this trick.)
#
# NB: If you need to prefix phone numbers to get through a PBX,
# put it in the ModemDialCmd; e.g. "DT9%s@".
#
#ModemDialCmd: ATDT%s@ # T for tone dialing, @ for silence
#
# Other possible configuration stuff. The default strings are
# shown below. Only those that are different from the defaults
# need to be included in the configuration file.
#
#ModemResetCmds: "" # stuff to do when modem
is reset
#ModemAnswerCmd: ATA # use this to answer phone
#ModemNoFlowCmd: AT&K # disable flow control
cmd
#ModemHardFlowCmd: AT&K3 # hardware flow control cmd
#ModemSoftFlowCmd: AT&K4 # software flow control cmd
#ModemNoAutoAnswerCmd: ATS0=0 # disable auto-answer
#
# Set modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH.
# Note that we both turn the speaker on/off and set volume.
#
#ModemSetVolumeCmd: "ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
#ModemEchoOffCmd: ATE0 # disable command echo
#ModemVerboseResultsCmd: ATV1 # enable verbose command
results
#ModemResultCodesCmd: ATQ0 # enable result codes
#ModemOnHookCmd: ATH0 # place phone on hook
(hangup)
#ModemSoftResetCmd: ATZ # do soft reset of modem
#ModemWaitTimeCmd: ATS7=60 # wait 60 seconds for carrier
#ModemCommaPauseTimeCmd: ATS8=2 # comma pause time is 2
seconds
#ModemRecvFillOrder: LSB2MSB # bit order of received facsimile
#ModemSendFillOrder: LSB2MSB # bit order modem expects for
transmit
#
Class1Cmd: AT+FCLASS=1 # command to enter class 1
Class1TCFResponseDelay: 75 # 75ms delay between recv TCF &
response
Class1SendPPMDelay: 75 # 75ms delay before sending PPM
Class1SendTCFDelay: 75 # 75ms delay between sending DCS
& TCF
Class1SwitchingDelay: 150 # 150ms delay in switching
transmission direction
Class1TrainingRecovery: 1500 # 1.5sec delay after training
failure
Class1RecvAbortOK: 200 # wait 200ms for abort response
Class1FrameOverhead: 4 # 4 byte overhead in recvd HDLC
frames
Class1RecvIdentTimer: 40000 # 35+5secs waiting for ident frames
Class1TCFMaxNonZero: 10 # max 10% of data may be non-zero
Class1TCFMinRun: 1000 # min run is 2/3rds of TCF duration
---------
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
