Re: [hylafax-users] retraining problem

[Lee Howard <faxguy@deanox.com>]

On 2002.04.08 09:34 Trey Nolen wrote:
> I've got a weird problem with a new Hylafax install. I can send faxes
> fine. I can receive faxes fine from another Hylafax server. However, on
> regular fax machines, I get a retraining error. Here is a typical trace
> of
> the session:
....
> Apr 08 10:55:55.37: [32563]: REMOTE wants 2-D MR
> Apr 08 10:55:55.37: [32563]: RECV training at v.17 14400 bit/s
> Apr 08 10:55:55.37: [32563]: <-- [11:AT+FRM=145\r]
> Apr 08 10:55:57.07: [32563]: --> [7:CONNECT]
> Apr 08 10:56:00.40: [32563]: MODEM TIMEOUT: receiving TCF
> Apr 08 10:56:00.40: [32563]: <-- data [1]
> Apr 08 10:56:00.40: [32563]: --> [10:NO CARRIER]
> Apr 08 10:56:00.40: [32563]: MODEM No carrier
> Apr 08 10:56:00.40: [32563]: RECV: TCF 5943 bytes, 96% non-zero, 1
> zero-run
> Apr 08 10:56:00.40: [32563]: RECV: reject TCF (too many non-zero, max
> 10%)
> Apr 08 10:56:00.40: [32563]: RECV: reject TCF (zero run too short, min
> 1800)
> Apr 08 10:56:30.40: [32563]: MODEM TIMEOUT: reading line from modem
> Apr 08 10:56:30.40: [32563]: MODEM <Empty line>
> Apr 08 10:56:30.40: [32563]: DELAY 75 ms
> Apr 08 10:56:30.48: [32563]: <-- [9:AT+FTH=3\r]
> Apr 08 10:56:30.54: [32563]: --> [7:CONNECT]
> Apr 08 10:56:30.54: [32563]: <-- HDLC<3:FF C8 22>
> Apr 08 10:56:30.54: [32563]: <-- data [3]
> Apr 08 10:56:30.54: [32563]: <-- data [2]
> Apr 08 10:56:31.85: [32563]: --> [2:OK]
> Apr 08 10:56:31.85: [32563]: TRAINING failed

Did you get this resolved?

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null