[hylafax-users] PROBLEM SENDING MORE THAN 1 PAGE ?!

[Kabouter Klus <klussie@yahoo.com>]

Hi,

we have Hylafax 4.1.1 running on a Redhat Linux 7.2
box with a Digi Acceleport RAS 8 multimodem card.
Receiving faxes is excellent, but we are unable to
send faxes with several pages : the 1st page goes
through, but then we get an error "SEND recv unknown
PPR 0x00". The Digi card works as Class 2.0 (since
putting it as Class 1 doesnt work at all ...)

This is part of the log...

Apr 15 16:03:11.50: [26674]: REMOTE best vres 7.7
line/mm
Apr 15 16:03:11.50: [26674]: REMOTE best format 2-D
MMR
Apr 15 16:03:11.50: [26674]: REMOTE supports T.30
Annex A, ECM
Apr 15 16:03:11.50: [26674]: REMOTE best 10
ms/scanline
Apr 15 16:03:11.50: [26674]: USE 14400 bit/s
Apr 15 16:03:11.50: [26674]: USE 10 ms/scanline
Apr 15 16:03:11.50: [26674]: USE error correction mode
Apr 15 16:03:11.50: [26674]: SEND file
"docq/doc6.tif;40"
Apr 15 16:03:11.51: [26674]: USE page width 1728
pixels in 215 mm
Apr 15 16:03:11.51: [26674]: USE unlimited page length

Apr 15 16:03:11.51: [26674]: USE 3.85 line/mm
Apr 15 16:03:11.51: [26674]: USE 2-D MR
Apr 15 16:03:11.51: [26674]: <--
[23:AT+FIS=0,5,0,2,1,1,0,3\r]
Apr 15 16:03:11.78: [26674]: --> [2:OK]
Apr 15 16:03:11.78: [26674]: <-- [7:AT+FDT\r]
Apr 15 16:03:19.53: [26674]: -->
[20:+FCS:0,5,0,2,1,1,0,0]
Apr 15 16:03:19.53: [26674]: --> [7:CONNECT]
Apr 15 16:03:19.53: [26674]: SEND begin page
Apr 15 16:03:19.55: [26674]: <-- data [1028]
Apr 15 16:03:19.55: [26674]: <-- data [1031]
Apr 15 16:03:19.55: [26674]: <-- data [1033]
Apr 15 16:03:19.56: [26674]: <-- data [1034]
Apr 15 16:03:19.56: [26674]: <-- data [1039]
Apr 15 16:03:19.56: [26674]: <-- data [1042]
Apr 15 16:03:19.56: [26674]: <-- data [1031]
Apr 15 16:03:19.56: [26674]: <-- data [1032]
Apr 15 16:03:19.59: [26674]: <-- data [1035]
Apr 15 16:03:19.65: [26674]: <-- data [1028]
Apr 15 16:03:19.99: [26674]: <-- data [1034]
Apr 15 16:03:20.29: [26674]: <-- data [1034]
Apr 15 16:03:20.42: [26674]: <-- data [1031]
Apr 15 16:03:20.62: [26674]: <-- data [1034]
Apr 15 16:03:20.94: [26674]: <-- data [1031]
Apr 15 16:03:21.02: [26674]: <-- data [1030]
Apr 15 16:03:21.16: [26674]: <-- data [642]
Apr 15 16:03:21.24: [26674]: SENT 17017 bytes of data
Apr 15 16:03:22.83: [26674]: SEND end page
Apr 15 16:03:22.83: [26674]: SEND send MPS (more
pages, same document)
Apr 15 16:03:22.83: [26674]: <-- data [2]
Apr 15 16:03:33.81: [26674]: --> [2:OK]
Apr 15 16:03:33.81: [26674]: <-- [8:AT+FPS?\r]
Apr 15 16:03:34.10: [26674]: --> [3:384]
Apr 15 16:03:34.10: [26674]: --> [2:OK]
Apr 15 16:03:34.10: [26674]: SEND recv unknown PPR
0x00
Apr 15 16:03:34.10: [26674]: <-- [7:AT+FKS\r]
Apr 15 16:03:45.54: [26674]: --> [7:+FHS:02]
Apr 15 16:03:45.54: [26674]: REMOTE HANGUP: Call
aborted,  from +FK or <CAN> (code 2)
Apr 15 16:03:45.54: [26674]: --> [2:OK]
Apr 15 16:03:45.54: [26674]: <-- [5:ATH0\r]
Apr 15 16:03:45.80: [26674]: --> [2:OK]
Apr 15 16:03:45.84: [26674]: SESSION END


Any help is appreciated !

thanks,

Klussie.

__________________________________________________
Do You Yahoo!?
Yahoo! Tax Center - online filing with TurboTax
http://taxes.yahoo.com/

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null