|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Rockwell / Conexant: "No response to MPS ..." and other problems
Sorry, that didn't help. No change, exactly the same behaviour. I forgot to tell before that if I send a coverpage (ie use sendfax without -n), the coverpage is received and printed ok, but nothing else.
/Johan
> On the sendfax command line try specifying the "-1" option to force 1D
> encoding.
>
> This may be appropriate only for the HP device however...
>
> -Jeff H.
>
> At 06:06 PM 4/12/02 +0200, Johan Ekenberg wrote:
> >Hi!
> >
> >I just built and installed Hylafax 4.1.1 on a Slackware 8.0
> Linux system.
> >The modem is branded "Bestmatic", and it seems to have a
> Rockwell/Conexant
> >chipset. Installation and configuration went smoothly until I tried to
> >send faxes. I'm trying to fax to a HP OfficeJet G85 Fax, but it
> won't work:
> >
> > - If I send only one page everything looks ok on the Hylafax-side. On
> > the HP side the fax seems to be received ok but then it's never
> printed (!!).
> > - If I send two or more pages I get the infamous "No response
> to MPS or
> > EOP repeated 3 times".
> > - I've tried to use both Class 1 and Class 2, but no difference.
> >
> >I'm a newbie when it comes to (Hyla)faxes and modems so I don't exactly
> >know what info to send. Below is:
> > a) How faxaddmodem identifies the modem
> > b) From config.modem when trying Class 1
> > c) From config.modem when trying Class 2
> > d) The output from "probemodem"
> > e) The logfile from sending 1 page. Everything seems to work
> well, but
> > the fax is never printed on the receiving side (HP OfficeJet).
> If this is
> > a HP problem I've never experienced it or heard about it before.
> > f) The logfile from sending 2 pages. No response to MPS... etc.
> >
> >Please help me, I really want to use Hylafax! If you need any more
> >information I'll be happy to provide it.
> >
> >Regards,
> >/Johan Ekenberg - Sweden
> >
> >------ Logs and info ------
> >
> >===== faxaddmodem gives this identification of the chipset:
> >
> >Hmm, this looks like a Class 1 modem.
> >Product code (ATI0) is "56000".
> >Other information (ATI3) is "P2107-V90".
> >Modem manufacturer is "Rockwell/Conexant".
> >Modem model is "AC/K56".
> >
> >
> >===== Class 1 config.modem
> ># Configuration for a Rockwell RC288DPi-based Class 1 modem.
> ># Hayes Optima 28800 firmware rev ???
> ># Microcom DeskPorte 28.8S firmware rev V1.100K-V34_DS
> ># PPI PM288FXMT firmware rev 1.57
> > ...
> >ModemType: Class1 # use this to supply a hint
> >ModemRate: 38400 # rate for DCE-DTE communication
> >ModemFlowControl: rtscts # default
> >#
> >ModemNoFlowCmd: AT&K0 # setup no flow control
> >ModemHardFlowCmd: AT&K3 # setup hardware flow control
> >ModemSoftFlowCmd: AT&K4 # setup software flow control
> >ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem
> >ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier
> >(or not)#
> >ModemMfrQueryCmd: !Rockwell
> >ModemModelQueryCmd: !RC288DPi
> >ModemRevQueryCmd: ATI3 # product information
> >#
> >ModemDialCmd: ATDT%s # T for tone dialing
> >
> >
> >
> >===== Class 2 config.modem:
> ># Configuration for a Rockwell AC/K56-based Class 2 modem.
> ># based upon work of Mark J. Bailey, Jonathan Mau and Glenn Burkhardt.
> ># Multitech MT5600ZDX
> ># Diamond Multimedia SupraExpress 56e PRO
> ># Zoom Telephonics 56Kx
> ># (and others)
> > ...
> >ModemType: Class2 # use class 2 interface
> >ModemRate: 38400
> >ModemFlowControl: xonxoff # default
> >ModemWaitForConnect: yes # wait for CONNECT on answer
> >#
> >#ModemResetCmds: AT&F2 # what you want for a Supra
> >ModemNoFlowCmd: AT&K # disable flow control cmd
> >ModemHardFlowCmd: AT&K3 # hardware flow control cmd
> >ModemSoftFlowCmd: AT&K4 # software flow control cmd
> >ModemSetupDTRCmd: AT&D3 # DTR off causes modem to reset
> >ModemSetupDCDCmd: AT&C1 # DCD follows carrier
> >ModemSetupAACmd: AT+FCLASS=0;+FAA=1 # enable in class 0
> >#
> >ModemSendFillOrder: LSB2MSB # as expected
> >ModemRecvFillOrder: MSB2LSB # opposite of what makes sense
> >Class2RecvDataTrigger: "\022" # a la 2388-B
> >
> >
> >
> >===== probemodem:
> >
> >Probing for best speed to talk to modem: 38400 OK.
> >
> >This looks like a Class 1 modem.
> >
> >ATI0 RESULT = "OK" RESPONSE = "56000"
> >ATI1 RESULT = "OK" RESPONSE = "030"
> >ATI2 RESULT = "OK" RESPONSE = "OK"
> >ATI3 RESULT = "OK" RESPONSE = "P2107-V90"
> >
> >Class 1 stuff...
> >
> >AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,1.0,2,8,10"
> >AT+FCLASS? RESULT = "OK" RESPONSE = "1"
> >AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK"
> >AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK"
> >AT+FCLASS? RESULT = "OK" RESPONSE = "1"
> >AT+FJUNK=? RESULT = "ERROR" RESPONSE = "ERROR"
> >AT+FJUNK? RESULT = "ERROR" RESPONSE = "ERROR"
> >AT+FAA=? RESULT = "ERROR" RESPONSE = "ERROR"
> >AT+FAA? RESULT = "ERROR" RESPONSE = "ERROR"
> >AT+FAE=? RESULT = "OK" RESPONSE = "(0,1)"
> >AT+FAE? RESULT = "OK" RESPONSE = "0"
> >AT+FTH=? RESULT = "OK" RESPONSE =
> >"3,24,48,72,73,74,96,97,98,121,122,145,146"
> >AT+FRH=? RESULT = "OK" RESPONSE =
> >"3,24,48,72,73,74,96,97,98,121,122,145,146"
> >AT+FTM=? RESULT = "OK" RESPONSE =
> >"3,24,48,72,73,74,96,97,98,121,122,145,146"
> >AT+FRM=? RESULT = "OK" RESPONSE =
> >"3,24,48,72,73,74,96,97,98,121,122,145,146"
> >AT+FTS=? RESULT = "ERROR" RESPONSE = "ERROR"
> >AT+FRS=? RESULT = "ERROR" RESPONSE = "ERROR"
> >
> >
> >
> >===== Logfile from trying to send 1 page to a HP OfficeJet G85
> Fax Machine
> >(where everything looks ok when sending, but the fax is never
> printed (!?)
> >
> >Apr 12 15:24:57.52: [ 938]: SESSION BEGIN 00000006 46317043887
> >Apr 12 15:24:57.52: [ 938]: HylaFAX (tm) Version 4.1.1
> >Apr 12 15:24:57.52: [ 938]: SEND FAX: JOB 4 DEST 7043887 COMMID
> 00000006
> >DEVICE '/dev/modem'
> >Apr 12 15:24:57.52: [ 938]: DELAY 75 ms
> >Apr 12 15:24:57.60: [ 938]: DELAY 2600 ms
> >Apr 12 15:25:00.20: [ 938]: <-- [4:ATZ\r]
> >Apr 12 15:25:00.29: [ 938]: --> [2:OK]
> >Apr 12 15:25:00.29: [ 938]: DELAY 3000 ms
> >Apr 12 15:25:03.29: [ 938]: <-- [5:ATE0\r]
> >Apr 12 15:25:03.30: [ 938]: --> [4:ATE0]
> >Apr 12 15:25:03.30: [ 938]: --> [2:OK]
> >Apr 12 15:25:03.30: [ 938]: <-- [5:ATV1\r]
> >Apr 12 15:25:03.32: [ 938]: --> [2:OK]
> >Apr 12 15:25:03.32: [ 938]: <-- [5:ATQ0\r]
> >Apr 12 15:25:03.34: [ 938]: --> [2:OK]
> >Apr 12 15:25:03.34: [ 938]: <-- [7:ATS0=0\r]
> >Apr 12 15:25:03.36: [ 938]: --> [2:OK]
> >Apr 12 15:25:03.36: [ 938]: <-- [7:ATS8=2\r]
> >Apr 12 15:25:03.38: [ 938]: --> [2:OK]
> >Apr 12 15:25:03.38: [ 938]: <-- [8:ATS7=60\r]
> >Apr 12 15:25:03.40: [ 938]: --> [2:OK]
> >Apr 12 15:25:03.40: [ 938]: <-- [6:AT&K4\r]
> >Apr 12 15:25:03.42: [ 938]: --> [2:OK]
> >Apr 12 15:25:03.42: [ 938]: <-- [6:AT&D3\r]
> >Apr 12 15:25:03.45: [ 938]: --> [2:OK]
> >Apr 12 15:25:03.45: [ 938]: <-- [6:AT&C1\r]
> >Apr 12 15:25:03.47: [ 938]: --> [2:OK]
> >Apr 12 15:25:03.47: [ 938]: <-- [12:AT+FCLASS=2\r]
> >Apr 12 15:25:03.49: [ 938]: --> [2:OK]
> >Apr 12 15:25:03.49: [ 938]: <-- [10:AT+FTBC=0\r]
> >Apr 12 15:25:03.51: [ 938]: --> [2:OK]
> >Apr 12 15:25:03.51: [ 938]: <-- [10:AT+FBOR=0\r]
> >Apr 12 15:25:03.53: [ 938]: --> [2:OK]
> >Apr 12 15:25:03.53: [ 938]: <-- [13:AT+FPHCTO=30\r]
> >Apr 12 15:25:03.56: [ 938]: --> [2:OK]
> >Apr 12 15:25:03.56: [ 938]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
> >Apr 12 15:25:03.59: [ 938]: --> [2:OK]
> >Apr 12 15:25:03.59: [ 938]: <-- [5:ATM0\r]
> >Apr 12 15:25:03.61: [ 938]: --> [2:OK]
> >Apr 12 15:25:03.61: [ 938]: <-- [12:AT+FCLASS=2\r]
> >Apr 12 15:25:03.73: [ 938]: --> [2:OK]
> >Apr 12 15:25:03.73: [ 938]: <-- [10:AT+FTBC=0\r]
> >Apr 12 15:25:03.85: [ 938]: --> [2:OK]
> >Apr 12 15:25:03.85: [ 938]: <-- [10:AT+FBOR=0\r]
> >Apr 12 15:25:03.97: [ 938]: --> [2:OK]
> >Apr 12 15:25:03.97: [ 938]: <-- [13:AT+FPHCTO=30\r]
> >Apr 12 15:25:04.09: [ 938]: --> [2:OK]
> >Apr 12 15:25:04.09: [ 938]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
> >Apr 12 15:25:04.22: [ 938]: --> [2:OK]
> >Apr 12 15:25:04.22: [ 938]: <-- [26:AT+FLID="EkenbergHylafax"\r]
> >Apr 12 15:25:04.35: [ 938]: --> [2:OK]
> >Apr 12 15:25:04.35: [ 938]: DIAL 7043887
> >Apr 12 15:25:04.35: [ 938]: <-- [12:ATDT7043887\r]
> >Apr 12 15:25:25.76: [ 938]: --> [5:+FCON]
> >Apr 12 15:25:27.72: [ 938]: --> [29:+FCSI: " +46317043887"]
> >Apr 12 15:25:27.72: [ 938]: REMOTE CSI "+46317043887"
> >Apr 12 15:25:28.26: [ 938]: --> [22:+FDIS: 1,5,0,2,1,0,0,0]
> >Apr 12 15:25:28.26: [ 938]: --> [2:OK]
> >Apr 12 15:25:28.26: [ 938]: REMOTE best rate 14400 bit/s
> >Apr 12 15:25:28.26: [ 938]: REMOTE max page width 1728 pixels in 215 mm
> >Apr 12 15:25:28.26: [ 938]: REMOTE max unlimited page length
> >Apr 12 15:25:28.26: [ 938]: REMOTE best vres 7.7 line/mm
> >Apr 12 15:25:28.26: [ 938]: REMOTE best format 2-D MR
> >Apr 12 15:25:28.26: [ 938]: REMOTE best 0 ms/scanline
> >Apr 12 15:25:28.26: [ 938]: USE 14400 bit/s
> >Apr 12 15:25:28.26: [ 938]: USE 0 ms/scanline
> >Apr 12 15:25:28.26: [ 938]: SEND file "docq/doc7.ps;30"
> >Apr 12 15:25:28.26: [ 938]: USE page width 1728 pixels in 215 mm
> >Apr 12 15:25:28.26: [ 938]: USE unlimited page length
> >Apr 12 15:25:28.26: [ 938]: USE 3.85 line/mm
> >Apr 12 15:25:28.26: [ 938]: USE 1-D MR
> >Apr 12 15:25:28.26: [ 938]: <-- [24:AT+FDIS=0,5,0,2,0,0,0,0\r]
> >Apr 12 15:25:28.39: [ 938]: --> [2:OK]
> >Apr 12 15:25:28.39: [ 938]: <-- [7:AT+FDT\r]
> >Apr 12 15:25:35.85: [ 938]: --> [22:+FDCS: 0,5,0,2,0,0,0,0]
> >Apr 12 15:25:35.85: [ 938]: --> [7:CONNECT]
> >Apr 12 15:25:35.85: [ 938]: SEND wait for XON
> >Apr 12 15:25:35.85: [ 938]: --> [1:]
> >Apr 12 15:25:35.85: [ 938]: SEND begin page
> >Apr 12 15:25:35.85: [ 938]: <-- data [1028]
> >Apr 12 15:25:35.85: [ 938]: <-- data [1028]
> >Apr 12 15:25:35.85: [ 938]: <-- data [1030]
> >Apr 12 15:25:35.85: [ 938]: <-- data [1026]
> >Apr 12 15:25:36.86: [ 938]: <-- data [1027]
> >Apr 12 15:25:36.86: [ 938]: <-- data [1025]
> >Apr 12 15:25:36.86: [ 938]: <-- data [1028]
> >Apr 12 15:25:38.02: [ 938]: <-- data [1030]
> >Apr 12 15:25:38.60: [ 938]: <-- data [1025]
> >Apr 12 15:25:39.17: [ 938]: <-- data [478]
> >Apr 12 15:25:39.17: [ 938]: SENT 9694 bytes of data
> >Apr 12 15:25:39.17: [ 938]: <-- data [2]
> >Apr 12 15:25:41.66: [ 938]: SEND end page
> >Apr 12 15:25:42.49: [ 938]: --> [2:OK]
> >Apr 12 15:25:42.49: [ 938]: SEND send EOP (no more pages or documents)
> >Apr 12 15:25:42.49: [ 938]: <-- [9:AT+FET=2\r]
> >Apr 12 15:25:45.26: [ 938]: --> [8:+FPTS: 1]
> >Apr 12 15:25:46.83: [ 938]: --> [8:+FHNG: 0]
> >Apr 12 15:25:46.83: [ 938]: REMOTE HANGUP: Normal and proper end of
> >connection (code 0)
> >Apr 12 15:25:46.83: [ 938]: SEND recv MCF (message confirmation)
> >Apr 12 15:25:46.83: [ 938]: SEND FAX (00000006): FROM
> >root@fax.ekenberg.se TO 7043887 (page 1 of 1 sent in 0:18)
> >Apr 12 15:25:46.83: [ 938]: SEND FAX (00000006): FROM
> >root@fax.ekenberg.se TO 7043887 (docq/doc7.ps;30 sent in 0:18)
> >Apr 12 15:25:46.83: [ 938]: <-- [5:ATH0\r]
> >Apr 12 15:25:47.59: [ 938]: --> [2:OK]
> >Apr 12 15:25:47.59: [ 938]: SESSION END
> >
> >
> >
> >===== Logfile from trying to send 2 pages to a HP OfficeJet G85
> fax machine:
> >
> >Apr 12 15:32:48.15: [ 1171]: SESSION BEGIN 00000009 46317043887
> >Apr 12 15:32:48.15: [ 1171]: HylaFAX (tm) Version 4.1.1
> >Apr 12 15:32:48.15: [ 1171]: SEND FAX: JOB 7 DEST 7043887 COMMID
> 00000009
> >DEVICE '/dev/modem'
> >Apr 12 15:32:48.15: [ 1171]: DELAY 75 ms
> >Apr 12 15:32:48.23: [ 1171]: DELAY 2600 ms
> >Apr 12 15:32:50.83: [ 1171]: <-- [4:ATZ\r]
> >Apr 12 15:32:50.92: [ 1171]: --> [2:OK]
> >Apr 12 15:32:50.92: [ 1171]: DELAY 3000 ms
> >Apr 12 15:32:53.92: [ 1171]: <-- [5:ATE0\r]
> >Apr 12 15:32:53.93: [ 1171]: --> [4:ATE0]
> >Apr 12 15:32:53.93: [ 1171]: --> [2:OK]
> >Apr 12 15:32:53.93: [ 1171]: <-- [5:ATV1\r]
> >Apr 12 15:32:53.95: [ 1171]: --> [2:OK]
> >Apr 12 15:32:53.95: [ 1171]: <-- [5:ATQ0\r]
> >Apr 12 15:32:53.97: [ 1171]: --> [2:OK]
> >Apr 12 15:32:53.97: [ 1171]: <-- [7:ATS0=0\r]
> >Apr 12 15:32:53.99: [ 1171]: --> [2:OK]
> >Apr 12 15:32:53.99: [ 1171]: <-- [7:ATS8=2\r]
> >Apr 12 15:32:54.01: [ 1171]: --> [2:OK]
> >Apr 12 15:32:54.01: [ 1171]: <-- [8:ATS7=60\r]
> >Apr 12 15:32:54.03: [ 1171]: --> [2:OK]
> >Apr 12 15:32:54.03: [ 1171]: <-- [6:AT&K3\r]
> >Apr 12 15:32:54.05: [ 1171]: --> [2:OK]
> >Apr 12 15:32:54.05: [ 1171]: <-- [6:AT&D2\r]
> >Apr 12 15:32:54.07: [ 1171]: --> [2:OK]
> >Apr 12 15:32:54.07: [ 1171]: <-- [6:AT&C1\r]
> >Apr 12 15:32:54.09: [ 1171]: --> [2:OK]
> >Apr 12 15:32:54.09: [ 1171]: <-- [12:AT+FCLASS=1\r]
> >Apr 12 15:32:54.12: [ 1171]: --> [2:OK]
> >Apr 12 15:32:54.12: [ 1171]: <-- [5:ATM0\r]
> >Apr 12 15:32:54.14: [ 1171]: --> [2:OK]
> >Apr 12 15:32:54.14: [ 1171]: <-- [12:AT+FCLASS=1\r]
> >Apr 12 15:32:54.27: [ 1171]: --> [2:OK]
> >Apr 12 15:32:54.27: [ 1171]: DIAL 7043887
> >Apr 12 15:32:54.27: [ 1171]: <-- [12:ATDT7043887\r]
> >Apr 12 15:33:15.92: [ 1171]: --> [7:CONNECT]
> >Apr 12 15:33:16.95: [ 1171]: --> [2:OK]
> >Apr 12 15:33:16.95: [ 1171]: REMOTE NSF "AD 00 36 20 00 00 00 00 6D"
> >Apr 12 15:33:16.95: [ 1171]: NSF remote fax equipment: HP
> >Apr 12 15:33:16.95: [ 1171]: <-- [9:AT+FRH=3\r]
> >Apr 12 15:33:16.98: [ 1171]: --> [7:CONNECT]
> >Apr 12 15:33:17.65: [ 1171]: --> [2:OK]
> >Apr 12 15:33:17.65: [ 1171]: REMOTE CSI "+46317043887"
> >Apr 12 15:33:17.65: [ 1171]: <-- [9:AT+FRH=3\r]
> >Apr 12 15:33:17.68: [ 1171]: --> [7:CONNECT]
> >Apr 12 15:33:18.07: [ 1171]: --> [2:OK]
> >Apr 12 15:33:18.07: [ 1171]: REMOTE best rate 14400 bit/s
> >Apr 12 15:33:18.07: [ 1171]: REMOTE max page width 1728 pixels in 215 mm
> >Apr 12 15:33:18.07: [ 1171]: REMOTE max unlimited page length
> >Apr 12 15:33:18.07: [ 1171]: REMOTE best vres 7.7 line/mm
> >Apr 12 15:33:18.07: [ 1171]: REMOTE best format 2-D MMR
> >Apr 12 15:33:18.07: [ 1171]: REMOTE supports T.30 Annex A, ECM
> >Apr 12 15:33:18.07: [ 1171]: REMOTE best 0 ms/scanline
> >Apr 12 15:33:18.07: [ 1171]: USE 14400 bit/s
> >Apr 12 15:33:18.07: [ 1171]: USE 0 ms/scanline
> >Apr 12 15:33:18.07: [ 1171]: SEND file "docq/doc10.ps;30"
> >Apr 12 15:33:18.07: [ 1171]: USE page width 1728 pixels in 215 mm
> >Apr 12 15:33:18.07: [ 1171]: USE unlimited page length
> >Apr 12 15:33:18.07: [ 1171]: USE 3.85 line/mm
> >Apr 12 15:33:18.07: [ 1171]: USE 1-D MR
> >Apr 12 15:33:18.07: [ 1171]: SEND training at v.17 14400 bit/s
> >Apr 12 15:33:18.07: [ 1171]: <-- [9:AT+FTH=3\r]
> >Apr 12 15:33:18.11: [ 1171]: --> [7:CONNECT]
> >Apr 12 15:33:18.11: [ 1171]: <-- data [23]
> >Apr 12 15:33:18.11: [ 1171]: <-- data [2]
> >Apr 12 15:33:19.89: [ 1171]: --> [7:CONNECT]
> >Apr 12 15:33:19.89: [ 1171]: <-- data [6]
> >Apr 12 15:33:19.89: [ 1171]: <-- data [2]
> >Apr 12 15:33:20.35: [ 1171]: --> [2:OK]
> >Apr 12 15:33:20.35: [ 1171]: <-- [9:AT+FTS=7\r]
> >Apr 12 15:33:20.46: [ 1171]: --> [2:OK]
> >Apr 12 15:33:20.46: [ 1171]: <-- [11:AT+FTM=145\r]
> >Apr 12 15:33:20.50: [ 1171]: --> [7:CONNECT]
> >Apr 12 15:33:20.50: [ 1171]: <-- data [1024]
> >Apr 12 15:33:20.50: [ 1171]: <-- data [1024]
> >Apr 12 15:33:20.50: [ 1171]: <-- data [652]
> >Apr 12 15:33:20.50: [ 1171]: <-- data [2]
> >Apr 12 15:33:23.85: [ 1171]: --> [2:OK]
> >Apr 12 15:33:23.85: [ 1171]: <-- [9:AT+FRH=3\r]
> >Apr 12 15:33:24.26: [ 1171]: --> [7:CONNECT]
> >Apr 12 15:33:25.16: [ 1171]: --> [2:OK]
> >Apr 12 15:33:25.16: [ 1171]: TRAINING succeeded
> >Apr 12 15:33:25.16: [ 1171]: DELAY 75 ms
> >Apr 12 15:33:25.24: [ 1171]: <-- [11:AT+FTM=146\r]
> >Apr 12 15:33:25.28: [ 1171]: --> [7:CONNECT]
> >Apr 12 15:33:25.28: [ 1171]: SEND begin page
> >Apr 12 15:33:25.28: [ 1171]: <-- data [1029]
> >Apr 12 15:33:25.28: [ 1171]: <-- data [1028]
> >Apr 12 15:33:25.28: [ 1171]: <-- data [1028]
> >Apr 12 15:33:25.28: [ 1171]: <-- data [1025]
> >Apr 12 15:33:25.28: [ 1171]: <-- data [1027]
> >Apr 12 15:33:25.96: [ 1171]: <-- data [1030]
> >Apr 12 15:33:26.46: [ 1171]: <-- data [1030]
> >Apr 12 15:33:27.46: [ 1171]: <-- data [1025]
> >Apr 12 15:33:27.95: [ 1171]: <-- data [1028]
> >Apr 12 15:33:28.46: [ 1171]: <-- data [1028]
> >Apr 12 15:33:29.49: [ 1171]: <-- data [1032]
> >Apr 12 15:33:29.99: [ 1171]: <-- data [1024]
> >Apr 12 15:33:30.49: [ 1171]: <-- data [1027]
> >Apr 12 15:33:30.99: [ 1171]: <-- data [1029]
> >Apr 12 15:33:32.03: [ 1171]: <-- data [1030]
> >Apr 12 15:33:32.53: [ 1171]: <-- data [1026]
> >Apr 12 15:33:33.04: [ 1171]: <-- data [1026]
> >Apr 12 15:33:33.54: [ 1171]: <-- data [1028]
> >Apr 12 15:33:34.54: [ 1171]: <-- data [1027]
> >Apr 12 15:33:35.05: [ 1171]: <-- data [1030]
> >Apr 12 15:33:35.55: [ 1171]: <-- data [1028]
> >Apr 12 15:33:36.55: [ 1171]: <-- data [1031]
> >Apr 12 15:33:37.05: [ 1171]: <-- data [998]
> >Apr 12 15:33:37.57: [ 1171]: SENT 23525 bytes of data
> >Apr 12 15:33:37.57: [ 1171]: SEND 1D RTC
> >Apr 12 15:33:37.57: [ 1171]: <-- data [29]
> >Apr 12 15:33:37.57: [ 1171]: <-- data [2]
> >Apr 12 15:33:37.57: [ 1171]: SEND end page
> >Apr 12 15:33:40.46: [ 1171]: --> [2:OK]
> >Apr 12 15:33:40.46: [ 1171]: <-- [9:AT+FTS=7\r]
> >Apr 12 15:33:40.55: [ 1171]: --> [2:OK]
> >Apr 12 15:33:40.55: [ 1171]: SEND send MPS (more pages, same document)
> >Apr 12 15:33:40.55: [ 1171]: <-- [9:AT+FTH=3\r]
> >Apr 12 15:33:40.59: [ 1171]: --> [7:CONNECT]
> >Apr 12 15:33:40.59: [ 1171]: <-- data [3]
> >Apr 12 15:33:40.59: [ 1171]: <-- data [2]
> >Apr 12 15:33:41.89: [ 1171]: --> [2:OK]
> >Apr 12 15:33:41.89: [ 1171]: <-- [9:AT+FRH=3\r]
> >Apr 12 15:33:44.99: [ 1171]: --> [0:]
> >Apr 12 15:33:44.99: [ 1171]: MODEM <Empty line>
> >Apr 12 15:33:44.99: [ 1171]: <-- data [1]
> >Apr 12 15:33:45.06: [ 1171]: --> [2:OK]
> >Apr 12 15:33:45.06: [ 1171]: SEND send MPS (more pages, same document)
> >Apr 12 15:33:45.06: [ 1171]: <-- [9:AT+FTH=3\r]
> >Apr 12 15:33:45.10: [ 1171]: --> [7:CONNECT]
> >Apr 12 15:33:45.10: [ 1171]: <-- data [3]
> >Apr 12 15:33:45.10: [ 1171]: <-- data [2]
> >Apr 12 15:33:46.43: [ 1171]: --> [2:OK]
> >Apr 12 15:33:46.43: [ 1171]: <-- [9:AT+FRH=3\r]
> >Apr 12 15:33:49.53: [ 1171]: --> [0:]
> >Apr 12 15:33:49.53: [ 1171]: MODEM <Empty line>
> >Apr 12 15:33:49.53: [ 1171]: <-- data [1]
> >Apr 12 15:33:49.60: [ 1171]: --> [2:OK]
> >Apr 12 15:33:49.60: [ 1171]: SEND send MPS (more pages, same document)
> >Apr 12 15:33:49.60: [ 1171]: <-- [9:AT+FTH=3\r]
> >Apr 12 15:33:49.64: [ 1171]: --> [7:CONNECT]
> >Apr 12 15:33:49.64: [ 1171]: <-- data [3]
> >Apr 12 15:33:49.64: [ 1171]: <-- data [2]
> >Apr 12 15:33:50.96: [ 1171]: --> [2:OK]
> >Apr 12 15:33:50.96: [ 1171]: <-- [9:AT+FRH=3\r]
> >Apr 12 15:33:54.06: [ 1171]: --> [0:]
> >Apr 12 15:33:54.06: [ 1171]: MODEM <Empty line>
> >Apr 12 15:33:54.06: [ 1171]: <-- data [1]
> >Apr 12 15:33:54.13: [ 1171]: --> [2:OK]
> >Apr 12 15:33:54.13: [ 1171]: No response to MPS or EOP repeated 3 tries
> >Apr 12 15:33:54.13: [ 1171]: <-- [9:AT+FTH=3\r]
> >Apr 12 15:33:54.17: [ 1171]: --> [7:CONNECT]
> >Apr 12 15:33:54.17: [ 1171]: <-- data [3]
> >Apr 12 15:33:54.17: [ 1171]: <-- data [2]
> >Apr 12 15:33:55.47: [ 1171]: --> [2:OK]
> >Apr 12 15:33:55.47: [ 1171]: <-- [5:ATH0\r]
> >Apr 12 15:33:56.35: [ 1171]: --> [2:OK]
> >Apr 12 15:33:56.35: [ 1171]: SESSION END
> >
> >
> >
> >____________________ HylaFAX(tm) Users Mailing List
> _______________________
> > To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> > On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org
> < /dev/null
>
> --------------------------------------
> Jeff Herring / jeffh@sldsi.com
> Seacoast Laboratory Data Systems, Inc.
> Voice: 603 431 4114 x14
> FAX: 603 431 2112
> --------------------------------------
>
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
> To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org <
> /dev/null
>
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
