Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] How 2D-MR work?
>>Apr 04 13:24:50.92: [ 7173]: REMOTE best format 1-D MR
>>Apr 04 13:24:50.92: [ 7173]: USE 1-D MR
>Where is the problem?
Nowhere :-). This is what we can see in the log when I include -1 calling
sendfax command. This is what happens when I send the fax from whfc, for
example.
Apr 04 12:46:36.22: [ 5832]: SEND FAX: JOB 1731 DEST xxxxxxxxx COMMID
00003654 DEVICE '/dev/ttyS1'
Apr 04 12:46:36.22: [ 5832]: DELAY 75 ms
Apr 04 12:46:36.30: [ 5832]: DELAY 2600 ms
Apr 04 12:46:38.90: [ 5832]: <-- [4:ATZ\r]
Apr 04 12:46:39.03: [ 5832]: --> [2:OK]
Apr 04 12:46:39.03: [ 5832]: DELAY 3000 ms
Apr 04 12:46:42.03: [ 5832]: <-- [5:ATE0\r]
Apr 04 12:46:42.04: [ 5832]: --> [4:ATE0]
Apr 04 12:46:42.04: [ 5832]: --> [2:OK]
Apr 04 12:46:42.04: [ 5832]: <-- [5:ATV1\r]
Apr 04 12:46:42.05: [ 5832]: --> [2:OK]
Apr 04 12:46:42.05: [ 5832]: <-- [5:ATQ0\r]
Apr 04 12:46:42.06: [ 5832]: --> [2:OK]
Apr 04 12:46:42.06: [ 5832]: <-- [7:ATS0=0\r]
Apr 04 12:46:42.07: [ 5832]: --> [2:OK]
Apr 04 12:46:42.07: [ 5832]: <-- [7:ATS8=2\r]
Apr 04 12:46:42.09: [ 5832]: --> [2:OK]
Apr 04 12:46:42.09: [ 5832]: <-- [8:ATS7=60\r]
Apr 04 12:46:42.11: [ 5832]: --> [2:OK]
Apr 04 12:46:42.11: [ 5832]: <-- [12:AT+FCLASS=1\r]
Apr 04 12:46:42.13: [ 5832]: --> [2:OK]
Apr 04 12:46:42.13: [ 5832]: <-- [5:ATM0\r]
Apr 04 12:46:42.14: [ 5832]: --> [2:OK]
Apr 04 12:46:42.14: [ 5832]: <-- [12:AT+FCLASS=1\r]
Apr 04 12:46:42.26: [ 5832]: --> [2:OK]
Apr 04 12:46:42.26: [ 5832]: DIAL 0,xxxxxxxxx
Apr 04 12:46:42.26: [ 5832]: <-- [16:ATDT0,xxxxxxxxx\r]
Apr 04 12:47:03.71: [ 5832]: --> [7:CONNECT]
Apr 04 12:47:05.60: [ 5832]: --> [2:OK]
Apr 04 12:47:05.60: [ 5832]: REMOTE NSF "00 00 79 00 00 00 82 0F 09 12 00
10 05 02 85 C
8 88 80 80 01 01 49 02 47 41 4C 45 52 49 41 53 20 50 52 49 4D 4F 52 20 03
BA"
Apr 04 12:47:05.60: [ 5832]: NSF remote fax equipment: Panasonic
Apr 04 12:47:05.60: [ 5832]: NSF remote station ID: "xxxxxxxxxxxxx "
Apr 04 12:47:05.60: [ 5832]: <-- [9:AT+FRH=3\r]
Apr 04 12:47:05.62: [ 5832]: --> [7:CONNECT]
Apr 04 12:47:06.29: [ 5832]: --> [2:OK]
Apr 04 12:47:06.29: [ 5832]: REMOTE CSI "xxxxxxxxxxxx"
Apr 04 12:47:06.29: [ 5832]: <-- [9:AT+FRH=3\r]
Apr 04 12:47:06.31: [ 5832]: --> [7:CONNECT]
Apr 04 12:47:06.56: [ 5832]: --> [2:OK]
Apr 04 12:47:06.56: [ 5832]: REMOTE best rate 9600 bit/s
Apr 04 12:47:06.56: [ 5832]: REMOTE max page width 1728 pixels in 215 mm
Apr 04 12:47:06.56: [ 5832]: REMOTE max unlimited page length
Apr 04 12:47:06.56: [ 5832]: REMOTE best vres 7.7 line/mm
Apr 04 12:47:06.56: [ 5832]: REMOTE best format 1-D MR
Apr 04 12:47:06.56: [ 5832]: REMOTE best 20 ms, 10 ms/scanline
Apr 04 12:47:06.56: [ 5832]: USE 9600 bit/s
Apr 04 12:47:06.56: [ 5832]: USE 20 ms, 10 ms/scanline
Apr 04 12:47:06.56: [ 5832]: SEND file "docq/doc1731.ps;40"
Apr 04 12:47:06.56: [ 5832]: Document was encoded with 2DMR, but client
does not support this data format
Apr 04 12:47:06.56: [ 5832]: <-- [9:AT+FTH=3\r]
Apr 04 12:47:06.61: [ 5832]: --> [7:CONNECT]
Apr 04 12:47:06.61: [ 5832]: <-- data [3]
Apr 04 12:47:06.61: [ 5832]: <-- data [2]
Apr 04 12:47:07.93: [ 5832]: --> [2:OK]
Apr 04 12:47:07.93: [ 5832]: <-- [5:ATH0\r]
Apr 04 12:47:09.86: [ 5832]: --> [2:OK]
Apr 04 12:47:09.86: [ 5832]: SESSION END
Editing the info/351xxxxxx file I can see supports2DEncoding:no.
I think hylafax turn to 1-D but because the file was encoded 2DMR the error
show up?
Pedro Roçadas (procadas@creditus.pt)
Dptº Informática,BPN-Créditus Technical Staff
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null