Re: [hylafax-users] MPS Error? (long)

[Lee Howard <faxguy@deanox.com>]

On 2002.04.01 14:04 Samuel wrote:

> Mar 29 11:02:19.54: [ 1489]: HylaFAX (tm) Version 4.1.1
> Mar 29 11:02:19.54: [ 1489]: SEND FAX: JOB 991 DEST 1500.795.1100 COMMID 
> 00001131 DEVICE '/dev/ttyS4'

> Mar 29 11:03:16.91: [ 1489]: SEND end page
> Mar 29 11:03:20.31: [ 1489]: --> [2:OK]
> Mar 29 11:03:20.31: [ 1489]: <-- [9:AT+FTS=7\r]
> Mar 29 11:03:20.39: [ 1489]: --> [2:OK]
> Mar 29 11:03:20.39: [ 1489]: SEND send MPS (more pages, same document)
> Mar 29 11:03:20.39: [ 1489]: <-- [9:AT+FTH=3\r]
> Mar 29 11:03:20.54: [ 1489]: --> [7:CONNECT]
> Mar 29 11:03:20.54: [ 1489]: <-- data [3]
> Mar 29 11:03:20.54: [ 1489]: <-- data [2]
> Mar 29 11:03:21.72: [ 1489]: --> [2:OK]
> Mar 29 11:03:21.72: [ 1489]: <-- [9:AT+FRH=3\r]
> Mar 29 11:03:22.12: [ 1489]: --> [10:NO CARRIER]
> Mar 29 11:03:22.12: [ 1489]: MODEM No carrier

> Mar 29 11:03:25.32: [ 1489]: No response to MPS or EOP repeated 3 tries

It's getting the page, so in etc/config add a line:

etc/destctrls

Create etc/destctrls with the line:

15007951100	Class1PPMWaitCmd="AT+FTS=9"

Restart faxgetty, resend fax.

If the same thing happens try using values of anything from 5 to 10 for 
the +FTS= value.

If it weren't getting the first page then you'd try Class1TCFWaitCmd 
instead, and if it were getting all pages, but not receiving a response to 
EOP, then you'd try Class1EOPWaitCmd.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null