[hylafax-users] Why i receveid a black fax ??????

[EPenove <nsl@free.fr>]

Hello , 

When i send a fax on my modem where is hylafax launcged : the result is a 
black tiff .... 

this is the log off the fax :

i don't see where the error is ....

i configure in Class 1 the modem USR Sportser Message plus ....

thanks to help me .... 

Regards
Manu

Mar 27 11:28:13.24: [ 9244]: SESSION BEGIN 00000004 33149654619
Mar 27 11:28:13.24: [ 9244]: HylaFAX (tm) Version 4.1.1
Mar 27 11:28:13.24: [ 9244]: <-- [13:AT+FCLASS=1A\r]
Mar 27 11:28:18.52: [ 9244]: --> [7:CONNECT]
Mar 27 11:28:18.52: [ 9244]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS1'
Mar 27 11:28:18.52: [ 9244]: RECV FAX: begin
Mar 27 11:28:18.72: [ 9244]: <-- data [23]
Mar 27 11:28:18.72: [ 9244]: <-- data [2]
Mar 27 11:28:18.73: [ 9244]: --> [7:CONNECT]
Mar 27 11:28:18.73: [ 9244]: <-- data [10]
Mar 27 11:28:18.73: [ 9244]: <-- data [2]
Mar 27 11:28:20.51: [ 9244]: --> [2:OK]
Mar 27 11:28:20.51: [ 9244]: <-- [9:AT+FRH=3\r]
Mar 27 11:28:21.06: [ 9244]: --> [7:CONNECT]
Mar 27 11:28:22.66: [ 9244]: --> [2:OK]
Mar 27 11:28:22.66: [ 9244]: REMOTE TSI ""
Mar 27 11:28:22.66: [ 9244]: <-- [9:AT+FRH=3\r]
Mar 27 11:28:22.67: [ 9244]: --> [7:CONNECT]
Mar 27 11:28:22.93: [ 9244]: --> [2:OK]
Mar 27 11:28:22.93: [ 9244]: REMOTE wants 9600 bit/s
Mar 27 11:28:22.93: [ 9244]: REMOTE wants page width 1728 pixels in 215 mm
Mar 27 11:28:22.93: [ 9244]: REMOTE wants unlimited page length
Mar 27 11:28:22.93: [ 9244]: REMOTE wants 3.85 line/mm
Mar 27 11:28:22.93: [ 9244]: REMOTE wants 2-D MR
Mar 27 11:28:22.93: [ 9244]: RECV training at v.29 9600 bit/s
Mar 27 11:28:22.93: [ 9244]: <-- [10:AT+FRM=96\r]
Mar 27 11:28:23.29: [ 9244]: --> [7:CONNECT]
Mar 27 11:28:24.87: [ 9244]: RECV: TCF 1893 bytes, 4% non-zero, 1805 zero-run
Mar 27 11:28:24.87: [ 9244]: --> [10:NO CARRIER]
Mar 27 11:28:24.87: [ 9244]: DELAY 75 ms
Mar 27 11:28:24.95: [ 9244]: TRAINING succeeded
Mar 27 11:28:24.97: [ 9244]: <-- [9:AT+FTH=3\r]
Mar 27 11:28:25.16: [ 9244]: --> [7:CONNECT]
Mar 27 11:28:25.16: [ 9244]: <-- data [3]
Mar 27 11:28:25.16: [ 9244]: <-- data [2]
Mar 27 11:28:26.34: [ 9244]: --> [2:OK]
Mar 27 11:28:26.34: [ 9244]: <-- [10:AT+FRM=96\r]
Mar 27 11:28:26.93: [ 9244]: --> [7:CONNECT]
Mar 27 11:28:26.93: [ 9244]: RECV: begin page
Mar 27 11:28:38.03: [ 9244]: RECV: 1139 total lines, 0 bad lines, 0 
consecutive bad lines
Mar 27 11:28:38.03: [ 9244]: RECV: end page
Mar 27 11:28:38.03: [ 9244]: --> [10:NO CARRIER]
Mar 27 11:28:38.03: [ 9244]: <-- [9:AT+FRH=3\r]
Mar 27 11:28:38.31: [ 9244]: --> [7:CONNECT]
Mar 27 11:28:39.13: [ 9244]: --> [2:OK]
Mar 27 11:28:39.13: [ 9244]: RECV recv EOP (no more pages or documents)
Mar 27 11:28:39.13: [ 9244]: DELAY 75 ms
Mar 27 11:28:39.21: [ 9244]: <-- [9:AT+FTH=3\r]
Mar 27 11:28:39.40: [ 9244]: --> [7:CONNECT]
Mar 27 11:28:39.40: [ 9244]: <-- data [3]
Mar 27 11:28:39.40: [ 9244]: <-- data [2]
Mar 27 11:28:40.58: [ 9244]: --> [2:OK]
Mar 27 11:28:40.58: [ 9244]: RECV send MCF (message confirmation)
Mar 27 11:28:40.58: [ 9244]: RECV FAX (00000004): from , page 1 in 0:16, INF, 
3.85 line/mm, 2-D MR, 9600 bit/s
Mar 27 11:28:40.60: [ 9244]: RECV FAX (00000004): recvq/fax00002.tif from , 
route to <unspecified>, 1 pages in 0:22
Mar 27 11:28:40.62: [ 9244]: <-- [9:AT+FRH=3\r]
Mar 27 11:28:41.06: [ 9244]: --> [7:CONNECT]
Mar 27 11:28:41.89: [ 9244]: --> [2:OK]
Mar 27 11:28:41.89: [ 9244]: RECV FAX: bin/faxrcvd "recvq/fax00002.tif" 
"ttyS1" "00000004" "" "" ""
Mar 27 11:28:42.13: [ 9244]: RECV FAX: end
Mar 27 11:28:42.13: [ 9244]: SESSION END
[root@ns recvq]#

-- 
Manu Penove - T-SIT
GAAAZZZZZZZZZZZZZZZZZ
- Web site : http://www.lookit.org -
- Web site : http://www.nsl.fr.st - 
- "C'est beau si ça passait" : JBT -
- Ymessenger : nslmanu - Icq : 2746138 -

____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null