|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Enconding 2DMR but needed 1DMR
Well, here is the log after a test using sendfax in the shell with -1
option
With 1DMR
Mar 26 16:40:06.22: [17620]: SEND file "docq/doc574.ps;01"
Mar 26 16:40:06.22: [17620]: USE page width 1728 pixels in 215 mm
Mar 26 16:40:06.23: [17620]: USE unlimited page length
Mar 26 16:40:06.23: [17620]: USE 7.7 line/mm
Mar 26 16:40:06.23: [17620]: USE 1-D MR
Mar 26 16:40:06.23: [17620]: SEND training at v.29 9600 bit/s
Mar 26 16:40:06.23: [17620]: <-- [9:AT+FTH=3\r]
Mar 26 16:40:06.28: [17620]: --> [7:CONNECT]
Mar 26 16:40:06.28: [17620]: <-- data [23]
Mar 26 16:40:06.28: [17620]: <-- data [2]
Mar 26 16:40:08.06: [17620]: --> [7:CONNECT]
Mar 26 16:40:08.06: [17620]: <-- data [6]
Mar 26 16:40:08.06: [17620]: <-- data [2]
With 2DMR:
Mar 26 11:08:35.21: [ 4402]: SEND file "docq/doc424.ps;40"
Mar 26 11:08:35.22: [ 4402]: Document was encoded with 2DMR, but client
does not support this data format
Mar 26 11:08:35.22: [ 4402]: <-- [9:AT+FTH=3\r]
Mar 26 11:08:35.26: [ 4402]: --> [7:CONNECT]
Mar 26 11:08:35.26: [ 4402]: <-- data [3]
Mar 26 11:08:35.26: [ 4402]: <-- data [2]
Mar 26 11:08:36.58: [ 4402]: --> [2:OK]
Mar 26 11:08:36.58: [ 4402]: <-- [5:ATH0\r]
Mar 26 11:08:38.51: [ 4402]: --> [2:OK]
Mar 26 11:08:38.51: [ 4402]: SESSION END
I make a test without -1 option and the fax fails...
Pedro Roçadas (procadas@creditus.pt)
Dptº Informática,BPN-Créditus Technical Staff
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
