Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Enconding 2DMR but needed 1DMR



First of all, sorry for the previous message, I pushed the wrong button.
I detected that a costumer can't receive fax from us. I have my modems
working in Class1, all of them, and following the processing none could
sent the fax. I'm talking about a USRobotics 56k Faxmodem model no.5630,
Multitech 5600ZDX and one of the Comtrol RocketPort multimodem ISA
card(Rockwell modem). I can encode the file in1DMR with sendfax command but
many of the users work with WHFC. I followed the thread with Giulio and
Dmitri but there's not a direct answer. I guess the question here is not
the speed rate but what I can do to automate the encoding. Destctrls? Or
hylafax had a way to reset the encoding? I'm a bit blind here. Any lights
will be helpfull.

Log session from the Multitech:

Mar 26 11:08:03.96: [ 4402]: SESSION BEGIN 00000947 351xxxxxxx
Mar 26 11:08:03.96: [ 4402]: HylaFAX (tm) Version 4.1.1
Mar 26 11:08:03.96: [ 4402]: SEND FAX: JOB 424 DEST xxxxxxx COMMID 00000947
DEVICE '/
dev/ttyS1'
Mar 26 11:08:03.96: [ 4402]: DELAY 75 ms
Mar 26 11:08:04.03: [ 4402]: DELAY 2600 ms
Mar 26 11:08:06.63: [ 4402]: <-- [4:ATZ\r]
Mar 26 11:08:06.76: [ 4402]: --> [2:OK]
Mar 26 11:08:06.76: [ 4402]: DELAY 3000 ms
Mar 26 11:08:09.76: [ 4402]: <-- [5:ATE0\r]
Mar 26 11:08:09.77: [ 4402]: --> [4:ATE0]
Mar 26 11:08:09.77: [ 4402]: --> [2:OK]
Mar 26 11:08:09.77: [ 4402]: <-- [5:ATV1\r]
Mar 26 11:08:09.78: [ 4402]: --> [2:OK]
Mar 26 11:08:09.78: [ 4402]: <-- [5:ATQ0\r]
Mar 26 11:08:09.79: [ 4402]: --> [2:OK]
Mar 26 11:08:09.79: [ 4402]: <-- [7:ATS0=0\r]
Mar 26 11:08:09.80: [ 4402]: --> [2:OK]
Mar 26 11:08:09.80: [ 4402]: <-- [7:ATS8=2\r]
Mar 26 11:08:09.81: [ 4402]: --> [2:OK]
Mar 26 11:08:09.81: [ 4402]: <-- [8:ATS7=60\r]
Mar 26 11:08:09.83: [ 4402]: --> [2:OK]
Mar 26 11:08:09.83: [ 4402]: <-- [12:AT+FCLASS=1\r]
Mar 26 11:08:09.85: [ 4402]: --> [2:OK]
Mar 26 11:08:09.85: [ 4402]: <-- [5:ATM0\r]
Mar 26 11:08:09.86: [ 4402]: --> [2:OK]
Mar 26 11:08:09.86: [ 4402]: <-- [12:AT+FCLASS=1\r]
Mar 26 11:08:09.98: [ 4402]: --> [2:OK]
Mar 26 11:08:09.98: [ 4402]: DIAL 0,xxxxxxxxx
Mar 26 11:08:09.98: [ 4402]: <-- [16:ATDT0,xxxxxx\r]
Mar 26 11:08:33.81: [ 4402]: --> [7:CONNECT]
Mar 26 11:08:34.89: [ 4402]: --> [2:OK]
Mar 26 11:08:34.89: [ 4402]: REMOTE NSF "00 00 40 80 4E 38 00 00 00 00 00
3E"
Mar 26 11:08:34.89: [ 4402]: NSF remote fax equipment: unknown
Mar 26 11:08:34.89: [ 4402]: <-- [9:AT+FRH=3\r]
Mar 26 11:08:34.91: [ 4402]: --> [7:CONNECT]
Mar 26 11:08:35.21: [ 4402]: --> [2:OK]
Mar 26 11:08:35.21: [ 4402]: REMOTE best rate 9600 bit/s
Mar 26 11:08:35.21: [ 4402]: REMOTE max page width 1728 pixels in 215 mm
Mar 26 11:08:35.21: [ 4402]: REMOTE max unlimited page length
Mar 26 11:08:35.21: [ 4402]: REMOTE best vres 7.7 line/mm
Mar 26 11:08:35.21: [ 4402]: REMOTE best format 1-D MR
Mar 26 11:08:35.21: [ 4402]: REMOTE best 20 ms, 10 ms/scanline
Mar 26 11:08:35.21: [ 4402]: USE 9600 bit/s
Mar 26 11:08:35.21: [ 4402]: USE 20 ms, 10 ms/scanline
Mar 26 11:08:35.21: [ 4402]: SEND file "docq/doc424.ps;40"
Mar 26 11:08:35.22: [ 4402]: Document was encoded with 2DMR, but client
does not suppor
t this data format
Mar 26 11:08:35.22: [ 4402]: <-- [9:AT+FTH=3\r]
Mar 26 11:08:35.26: [ 4402]: --> [7:CONNECT]
Mar 26 11:08:35.26: [ 4402]: <-- data [3]
Mar 26 11:08:35.26: [ 4402]: <-- data [2]
Mar 26 11:08:36.58: [ 4402]: --> [2:OK]
Mar 26 11:08:36.58: [ 4402]: <-- [5:ATH0\r]
Mar 26 11:08:38.51: [ 4402]: --> [2:OK]
Mar 26 11:08:38.51: [ 4402]: SESSION END

Pedro Roçadas (procadas@creditus.pt)
Dptº Informática,BPN-Créditus Technical Staff


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services