|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] RSPREC error/got DCN (code 51)
Hi all,
Each time I send a fax to this one fax machine I'm getting an error
'RSPREC error/got DCN (code 51)'. Anyone know what this means? I did a
search in the archive for code 51 but I couldn't find anything. I've
included the log for one of the transmissions if that helps. The remote
fax machine doesn't receive anything, but when we sent the fax on a
normal fax machine it received it ok.
Thanks
Adam Fox.
Mar 26 10:36:31.39: [ 7819]: SESSION BEGIN 00060685 61312345678
Mar 26 10:36:31.39: [ 7819]: HylaFAX (tm) Version 4.1
Mar 26 10:36:31.39: [ 7819]: SEND FAX: JOB 14770 DEST 0312345678 COMMID
00060685
Mar 26 10:36:31.39: [ 7819]: DEVICE '/dev/ttyS1'
Mar 26 10:36:31.39: [ 7819]: DELAY 75 ms
Mar 26 10:36:31.47: [ 7819]: DELAY 2600 ms
Mar 26 10:36:34.09: [ 7819]: <-- [4:ATZ\r]
Mar 26 10:36:34.74: [ 7819]: --> [3:ATZ]
Mar 26 10:36:34.74: [ 7819]: --> [2:OK]
Mar 26 10:36:34.74: [ 7819]: <-- [5:ATX4\r]
Mar 26 10:36:34.90: [ 7819]: --> [4:ATX4]
Mar 26 10:36:34.90: [ 7819]: --> [2:OK]
Mar 26 10:36:34.90: [ 7819]: <-- [5:ATE0\r]
Mar 26 10:36:35.06: [ 7819]: --> [4:ATE0]
Mar 26 10:36:35.06: [ 7819]: --> [2:OK]
Mar 26 10:36:35.06: [ 7819]: <-- [5:ATV1\r]
Mar 26 10:36:35.22: [ 7819]: --> [2:OK]
Mar 26 10:36:35.22: [ 7819]: <-- [5:ATQ0\r]
Mar 26 10:36:35.38: [ 7819]: --> [2:OK]
Mar 26 10:36:35.38: [ 7819]: <-- [7:ATS0=0\r]
Mar 26 10:36:35.54: [ 7819]: --> [2:OK]
Mar 26 10:36:35.54: [ 7819]: <-- [7:ATS8=2\r]
Mar 26 10:36:35.70: [ 7819]: --> [2:OK]
Mar 26 10:36:35.70: [ 7819]: <-- [8:ATS7=60\r]
Mar 26 10:36:35.86: [ 7819]: --> [2:OK]
Mar 26 10:36:35.86: [ 7819]: <-- [6:AT&E4\r]
Mar 26 10:36:36.02: [ 7819]: --> [2:OK]
Mar 26 10:36:36.02: [ 7819]: <-- [6:AT&D3\r]
Mar 26 10:36:36.18: [ 7819]: --> [2:OK]
Mar 26 10:36:36.18: [ 7819]: <-- [6:AT&C4\r]
Mar 26 10:36:36.34: [ 7819]: --> [2:OK]
Mar 26 10:36:36.34: [ 7819]: <-- [12:AT+FCLASS=2\r]
Mar 26 10:36:36.50: [ 7819]: --> [2:OK]
Mar 26 10:36:36.50: [ 7819]: <-- [10:AT+FTBC=0\r]
Mar 26 10:36:36.66: [ 7819]: --> [2:OK]
Mar 26 10:36:36.66: [ 7819]: <-- [10:AT+FBOR=0\r]
Mar 26 10:36:36.82: [ 7819]: --> [2:OK]
Mar 26 10:36:36.82: [ 7819]: <-- [13:AT+FPHCTO=30\r]
Mar 26 10:36:36.98: [ 7819]: --> [2:OK]
Mar 26 10:36:36.98: [ 7819]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
Mar 26 10:36:37.15: [ 7819]: --> [2:OK]
Mar 26 10:36:37.15: [ 7819]: <-- [5:ATM0\r]
Mar 26 10:36:37.31: [ 7819]: --> [2:OK]
Mar 26 10:36:37.31: [ 7819]: <-- [12:AT+FCLASS=2\r]
Mar 26 10:36:37.57: [ 7819]: --> [2:OK]
Mar 26 10:36:37.57: [ 7819]: <-- [10:AT+FTBC=0\r]
Mar 26 10:36:37.83: [ 7819]: --> [2:OK]
Mar 26 10:36:37.83: [ 7819]: <-- [10:AT+FBOR=0\r]
Mar 26 10:36:38.09: [ 7819]: --> [2:OK]
Mar 26 10:36:38.09: [ 7819]: <-- [13:AT+FPHCTO=30\r]
Mar 26 10:36:38.35: [ 7819]: --> [2:OK]
Mar 26 10:36:38.35: [ 7819]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
Mar 26 10:36:38.62: [ 7819]: --> [2:OK]
Mar 26 10:36:38.62: [ 7819]: <-- [23:AT+FLID="GRIBBLES MEL"\r]
Mar 26 10:36:38.89: [ 7819]: --> [2:OK]
Mar 26 10:36:38.89: [ 7819]: DIAL 0312345678
Mar 26 10:36:38.89: [ 7819]: <-- [16:ATDT0312345678@\r]
Mar 26 10:36:54.29: [ 7819]: --> [5:+FCON]
Mar 26 10:36:58.14: [ 7819]: --> [162:+FNSF:00 00 11 80 FF 8A 49 10 4D
61 6E 73 66 69 65 6C 64 20 48 6F 73 70 69 74 00 5E 00 80 80 80 0A 14 01
01 4D 61 6E 73 66 69 65 6C 64 20 48 6F 73 70 69 74 61 6C ]
Mar 26 10:36:58.14: [ 7819]: REMOTE NSF "00 00 11 80 FF 8A 49 10 4D 61
6E 73 66 69 65 6C 64 20 48 6F 73 70 69 74 00 5E 00 80 80 80 0A 14 01 01
4D 61 6E 73 66 69 65 6C 64 20 48 6F 73 70 69 74 61 6C"
Mar 26 10:36:58.14: [ 7819]: NSF remote fax equipment: Canon
Mar 26 10:36:58.14: [ 7819]: NSF remote station ID: "XXXX"
Mar 26 10:36:58.14: [ 7819]: --> [28:+FCSI:" 03 12345678"]
Mar 26 10:36:58.14: [ 7819]: REMOTE CSI "03 12345678"
Mar 26 10:36:58.14: [ 7819]: --> [21:+FDIS:1,5,0,2,1,2,1,0]
Mar 26 10:36:58.14: [ 7819]: --> [2:OK]
Mar 26 10:36:58.14: [ 7819]: REMOTE best rate 14400 bit/s
Mar 26 10:36:58.14: [ 7819]: REMOTE max page width 1728 pixels in 215 mm
Mar 26 10:36:58.14: [ 7819]: REMOTE max unlimited page length
Mar 26 10:36:58.14: [ 7819]: REMOTE best vres 7.7 line/mm
Mar 26 10:36:58.14: [ 7819]: REMOTE best format 2-D MR
Mar 26 10:36:58.14: [ 7819]: REMOTE supports T.30 Annex C, half duplex ECM
Mar 26 10:36:58.14: [ 7819]: REMOTE best 0 ms/scanline
Mar 26 10:36:58.14: [ 7819]: USE 14400 bit/s
Mar 26 10:36:58.14: [ 7819]: USE 0 ms/scanline
Mar 26 10:36:58.14: [ 7819]: SEND file "docq/doc20365.ps;41"
Mar 26 10:36:58.14: [ 7819]: USE page width 1728 pixels in 215 mm
Mar 26 10:36:58.14: [ 7819]: USE unlimited page length
Mar 26 10:36:58.14: [ 7819]: USE 7.7 line/mm
Mar 26 10:36:58.14: [ 7819]: USE 2-D MR
Mar 26 10:36:58.14: [ 7819]: <-- [24:AT+FDIS=1,5,0,2,1,0,0,0\r]
Mar 26 10:36:58.41: [ 7819]: --> [2:OK]
Mar 26 10:36:58.41: [ 7819]: <-- [7:AT+FDT\r]
Mar 26 10:37:05.18: [ 7819]: --> [21:+FDCS:1,5,0,2,1,0,0,0]
Mar 26 10:37:05.18: [ 7819]: --> [7:CONNECT]
Mar 26 10:37:05.18: [ 7819]: SEND wait for XON
Mar 26 10:37:05.18: [ 7819]: --> [1:]
Mar 26 10:37:05.18: [ 7819]: SEND begin page
Mar 26 10:37:05.18: [ 7819]: <-- data [1027]
Mar 26 10:37:05.18: [ 7819]: <-- data [1029]
Mar 26 10:37:05.18: [ 7819]: <-- data [1030]
Mar 26 10:37:05.18: [ 7819]: <-- data [1030]
Mar 26 10:37:06.18: [ 7819]: <-- data [1028]
Mar 26 10:37:06.18: [ 7819]: <-- data [1033]
Mar 26 10:37:06.18: [ 7819]: <-- data [1030]
Mar 26 10:37:06.18: [ 7819]: <-- data [1028]
Mar 26 10:37:07.50: [ 7819]: <-- data [1032]
Mar 26 10:37:08.16: [ 7819]: <-- data [1036]
Mar 26 10:37:08.82: [ 7819]: <-- data [1032]
Mar 26 10:37:09.49: [ 7819]: <-- data [1024]
Mar 26 10:37:10.15: [ 7819]: <-- data [599]
Mar 26 10:37:10.15: [ 7819]: SENT 12883 bytes of data
Mar 26 10:37:10.15: [ 7819]: <-- data [2]
Mar 26 10:37:10.15: [ 7819]: SEND end page
Mar 26 10:37:13.03: [ 7819]: --> [16:]
Mar 26 10:37:13.03: [ 7819]: --> [2:OK]
Mar 26 10:37:13.03: [ 7819]: SEND send EOP (no more pages or documents)
Mar 26 10:37:13.03: [ 7819]: <-- [9:AT+FET=2\r]
Mar 26 10:37:17.07: [ 7819]: --> [8:+FHNG:51]
Mar 26 10:37:17.07: [ 7819]: REMOTE HANGUP: RSPREC error/got DCN (code 51)
Mar 26 10:37:17.07: [ 7819]: SEND: RSPREC error/got DCN; Giving up after
3 attempts to send same page "docq/doc20365.ps;41", dirnum 0
Mar 26 10:37:17.07: [ 7819]: <-- [5:ATH0\r]
Mar 26 10:37:17.71: [ 7819]: --> [2:OK]
Mar 26 10:37:17.71: [ 7819]: SESSION END
Attention:
The information contained in this message and or attachments is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any system and destroy any copies.
Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of The Gribbles Group.
Thank You.
Whilst every effort has been made to ensure that this e-mail message and any attachments are free from viruses, you should scan this message and any attachments.
Under no circumstances do we accept liability for any loss or damage which may result from your receipt of this message or any attachment.
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
