Re: [hylafax-users] problem sending faxes with 4.1.1

To: hylafax-users@hylafax.org
Subject: Re: [hylafax-users] problem sending faxes with 4.1.1
From: Facundo <facundo@sisat.com.ar>
Date: Mon, 18 Mar 2002 17:12:45 -0300 (ART)


I'm attaching a sample session. Thanks in advance

> On 2002.03.15 12:07 Facundo wrote:
> >
> > I've installed HylaFax 4.1.1 in a Caldera OpenLinux 3.1.
> > Reception works fine, but when I send a fax it's received
> > truncated after the 10th line of text aprox. I get no
> > errors and the logs reports the fax sent without problems.
>
> Regardless of whether the log reports an error or not, having the log
> would be most useful in helping you.
>
> Lee.
>



Mar 15 18:28:23.09: [17159]: SESSION BEGIN 00000002 541943729143

Mar 15 18:28:23.09: [17159]: SEND FAX: JOB 1 DEST 9,43729143 COMMID 00000002

Mar 15 18:28:23.09: [17159]: DELAY 2600 ms

Mar 15 18:28:25.75: [17159]: <-- [4:ATZ\r]

Mar 15 18:28:26.51: [17159]: --> [3:ATZ]

Mar 15 18:28:26.51: [17159]: --> [2:OK]

Mar 15 18:28:26.51: [17159]: <-- [15:ATE0V1Q0S0=0H0\r]

Mar 15 18:28:26.83: [17159]: --> [14:ATE0V1Q0S0=0H0]

Mar 15 18:28:26.83: [17159]: --> [2:OK]

Mar 15 18:28:26.83: [17159]: <-- [21:ATS8=2S7=60&E4&D3&C1\r]

Mar 15 18:28:27.13: [17159]: --> [2:OK]

Mar 15 18:28:27.13: [17159]: <-- [12:AT+FCLASS=2\r]

Mar 15 18:28:27.43: [17159]: --> [2:OK]

Mar 15 18:28:27.43: [17159]: <-- [10:AT+FTBC=0\r]

Mar 15 18:28:27.73: [17159]: --> [2:OK]

Mar 15 18:28:27.73: [17159]: <-- [10:AT+FBOR=0\r]

Mar 15 18:28:28.03: [17159]: --> [2:OK]

Mar 15 18:28:28.03: [17159]: <-- [13:AT+FPHCTO=30\r]

Mar 15 18:28:28.33: [17159]: --> [2:OK]

Mar 15 18:28:28.33: [17159]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]

Mar 15 18:28:28.63: [17159]: --> [2:OK]

Mar 15 18:28:28.63: [17159]: <-- [5:ATM0\r]

Mar 15 18:28:28.93: [17159]: --> [2:OK]

Mar 15 18:28:28.94: [17159]: <-- [12:AT+FCLASS=2\r]

Mar 15 18:28:29.35: [17159]: --> [2:OK]

Mar 15 18:28:29.35: [17159]: <-- [10:AT+FTBC=0\r]

Mar 15 18:28:29.75: [17159]: --> [2:OK]

Mar 15 18:28:29.75: [17159]: <-- [10:AT+FBOR=0\r]

Mar 15 18:28:30.15: [17159]: --> [2:OK]

Mar 15 18:28:30.15: [17159]: <-- [13:AT+FPHCTO=30\r]

Mar 15 18:28:30.55: [17159]: --> [2:OK]

Mar 15 18:28:30.55: [17159]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]

Mar 15 18:28:30.95: [17159]: --> [2:OK]

Mar 15 18:28:30.95: [17159]: <-- [27:AT+FLID="PEPSICO - modem1"\r]

Mar 15 18:28:31.35: [17159]: --> [2:OK]

Mar 15 18:28:31.35: [17159]: DIAL 9,43729143

Mar 15 18:28:31.35: [17159]: <-- [16:ATDT9,43729143@\r]

Mar 15 18:28:51.59: [17159]: --> [5:+FCON]

Mar 15 18:28:54.65: [17159]: --> [117:+FNSF:00 00 0E 00 00 00 96 0F 01 02 00 10 05 02 95 C8 08 01 49 02 53 49 53 41 54 20 73 2E

 61 2E 20 20 20 20 20 20 03 ]

Mar 15 18:28:54.65: [17159]: REMOTE NSF "00 00 0E 00 00 00 96 0F 01 02 00 10 05 02 95 C8 08 01 49 02 53 49 53 41 54 20 73 2E 61

 2E 20 20 20 20 20 20 03"

Mar 15 18:28:54.65: [17159]: NSF remote fax equipment: Panasonic KX-F90

Mar 15 18:28:54.65: [17159]: NSF remote station ID: "SISAT s.a.      "

Mar 15 18:28:54.65: [17159]: --> [28:+FCSI:"     54 011 43723143"]

Mar 15 18:28:54.65: [17159]: REMOTE CSI "54 011 43723143"

Mar 15 18:28:54.65: [17159]: --> [21:+FDIS:1,3,0,2,0,0,0,4]

Mar 15 18:28:54.65: [17159]: --> [2:OK]

Mar 15 18:28:54.65: [17159]: REMOTE best rate 9600 bit/s

Mar 15 18:28:54.65: [17159]: REMOTE max page width 1728 pixels in 215 mm

Mar 15 18:28:54.65: [17159]: REMOTE max unlimited page length 

Mar 15 18:28:54.65: [17159]: REMOTE best vres 7.7 line/mm

Mar 15 18:28:54.65: [17159]: REMOTE best format 1-D MR

Mar 15 18:28:54.65: [17159]: REMOTE best 20 ms, 10 ms/scanline

Mar 15 18:28:54.65: [17159]: USE 9600 bit/s

Mar 15 18:28:54.65: [17159]: USE 20 ms, 10 ms/scanline

Mar 15 18:28:54.65: [17159]: SEND file "docq/doc1.ps;31"

Mar 15 18:28:54.65: [17159]: USE page width 1728 pixels in 215 mm

Mar 15 18:28:54.65: [17159]: USE unlimited page length 

Mar 15 18:28:54.66: [17159]: USE 7.7 line/mm

Mar 15 18:28:54.66: [17159]: USE 1-D MR

Mar 15 18:28:54.66: [17159]: <-- [24:AT+FDIS=1,3,0,2,0,0,0,4\r]

Mar 15 18:28:55.07: [17159]: --> [2:OK]

Mar 15 18:28:55.07: [17159]: <-- [7:AT+FDT\r]

Mar 15 18:29:01.41: [17159]: --> [21:+FDCS:1,3,0,2,0,0,0,3]

Mar 15 18:29:01.41: [17159]: --> [7:CONNECT]

Mar 15 18:29:01.41: [17159]: SEND wait for XON

Mar 15 18:29:01.41: [17159]: --> [1:]

Mar 15 18:29:01.41: [17159]: SEND begin page

Mar 15 18:29:01.41: [17159]: <-- data [1025]

Mar 15 18:29:01.41: [17159]: <-- data [1027]

Mar 15 18:29:01.41: [17159]: <-- data [1025]

Mar 15 18:29:01.41: [17159]: <-- data [1029]

Mar 15 18:29:01.42: [17159]: <-- data [1026]

Mar 15 18:29:01.42: [17159]: <-- data [1027]

Mar 15 18:29:01.42: [17159]: <-- data [1027]

Mar 15 18:29:01.42: [17159]: <-- data [1028]

Mar 15 18:29:02.22: [17159]: <-- data [1029]

Mar 15 18:29:02.22: [17159]: <-- data [1029]

Mar 15 18:29:02.22: [17159]: <-- data [1026]

Mar 15 18:29:02.22: [17159]: <-- data [1033]

Mar 15 18:29:03.12: [17159]: <-- data [1027]

Mar 15 18:29:03.12: [17159]: <-- data [1032]

Mar 15 18:29:03.12: [17159]: <-- data [1028]

Mar 15 18:29:04.02: [17159]: <-- data [1029]

Mar 15 18:29:04.02: [17159]: <-- data [1029]

Mar 15 18:29:04.02: [17159]: <-- data [1028]

Mar 15 18:29:04.82: [17159]: <-- data [1029]

Mar 15 18:29:04.82: [17159]: <-- data [1027]

Mar 15 18:29:04.82: [17159]: <-- data [1032]

Mar 15 18:29:05.62: [17159]: <-- data [1033]

Mar 15 18:29:05.62: [17159]: <-- data [1031]

Mar 15 18:29:05.62: [17159]: <-- data [1031]

Mar 15 18:29:06.52: [17159]: <-- data [1035]

Mar 15 18:29:06.52: [17159]: <-- data [1031]

Mar 15 18:29:06.52: [17159]: <-- data [1026]

Mar 15 18:29:06.52: [17159]: <-- data [1027]

Mar 15 18:29:07.32: [17159]: <-- data [582]

Mar 15 18:29:07.32: [17159]: SENT 29252 bytes of data

Mar 15 18:29:07.32: [17159]: <-- data [2]

Mar 15 18:29:07.32: [17159]: SEND end page

Mar 15 18:29:11.73: [17159]: --> [2:]

Mar 15 18:29:11.73: [17159]: --> [2:OK]

Mar 15 18:29:11.73: [17159]: SEND send EOP (no more pages or documents)

Mar 15 18:29:11.73: [17159]: <-- [9:AT+FET=2\r]

Mar 15 18:29:17.17: [17159]: --> [7:+FPTS:1]

Mar 15 18:29:17.17: [17159]: SEND recv MCF (message confirmation)

Mar 15 18:29:17.17: [17159]: SEND FAX (00000002): FROM root@hylafax.pepsicoargentina.com.ar TO 9,43729143 (page 1 of 1 sent in 

0:23)

Mar 15 18:29:17.17: [17159]: SEND FAX (00000002): FROM root@hylafax.pepsicoargentina.com.ar TO 9,43729143 (docq/doc1.ps;31 sent

 in 0:23)

Mar 15 18:29:17.17: [17159]: <-- [5:ATH0\r]

Mar 15 18:29:18.71: [17159]: --> [7:+FHNG:0]

Mar 15 18:29:18.71: [17159]: REMOTE HANGUP: Normal and proper end of connection (code 0)

Mar 15 18:29:19.37: [17159]: --> [2:OK]

Mar 15 18:29:19.37: [17159]: SESSION END

Follow-Ups:
- Re: [hylafax-users] problem sending faxes with 4.1.1
  - From: Lee Howard

References:
- Re: [hylafax-users] problem sending faxes with 4.1.1
  - From: Lee Howard

Prev by Date: Re: [hylafax-users] Receive Errors
Next by Date: Re: [hylafax-users] Receive Errors
Previous by thread: Re: [hylafax-users] problem sending faxes with 4.1.1
Next by thread: Re: [hylafax-users] problem sending faxes with 4.1.1
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services