[hylafax-users] Remote fax disconnect prematurely

[Osvaldo Lucchini <o.lucchini@pid.it>]

Hi all of you.

As requested by Lee, I send the full log of the problem.
Here the description:
After sending a fax, the finale status indicate the error in the subject,
even if the final destination seems to have received the document completely.

Here the log:
Mar 14 17:01:50.94: [ 9653]: SESSION BEGIN 00000017 3902xxxxxxxx
Mar 14 17:01:50.94: [ 9653]: HylaFAX (tm) Version 4.1.1
Mar 14 17:01:50.94: [ 9653]: SEND FAX: JOB 15 DEST xxxxxxxx COMMID 00000017 
DEVICE '/dev/ttyS0'
Mar 14 17:01:50.94: [ 9653]: DELAY 75 ms
Mar 14 17:01:51.01: [ 9653]: DELAY 2600 ms
Mar 14 17:01:53.78: [ 9653]: DELAY 3000 ms
Mar 14 17:01:57.65: [ 9653]: DIAL xxxxxxxxx
Mar 14 17:02:40.70: [ 9653]: --> HDLC<31:FF C0 04 9A 80 40 22 F2 2A 2A 74 
04 AA 32 92 6A 92 04 04 04 04 04 04 04 04 04 03 00 88 AF 5D>
Mar 14 17:02:40.70: [ 9653]: REMOTE NSF "59 01 02 44 4F 54 54 2E 20 55 4C 
49 56 49 20 20 20 20 20 20 20 20 20 C0 00 11 F5"
Mar 14 17:02:40.70: [ 9653]: NSF remote fax equipment: unknown
Mar 14 17:02:40.70: [ 9653]: NSF possible remote station ID: "XXXXXXXXXX"
Mar 14 17:02:41.40: [ 9653]: --> HDLC<25:FF C0 02 CC 0C CC CC 1C 2C EC CC 
0C 04 04 04 04 04 04 04 04 04 04 04 C1 28>
Mar 14 17:02:41.40: [ 9653]: REMOTE CSI "037483303"
Mar 14 17:02:41.72: [ 9653]: --> HDLC<11:FF C8 01 00 77 19 01 01 58 8B 24>
Mar 14 17:02:41.73: [ 9653]: REMOTE best rate 14400 bit/s
Mar 14 17:02:41.73: [ 9653]: REMOTE max page width 1728 pixels in 215 mm
Mar 14 17:02:41.73: [ 9653]: REMOTE max unlimited page length
Mar 14 17:02:41.73: [ 9653]: REMOTE best vres 7.7 line/mm
Mar 14 17:02:41.73: [ 9653]: REMOTE best format 2-D MR
Mar 14 17:02:41.73: [ 9653]: REMOTE best 5 ms/scanline
Mar 14 17:02:41.73: [ 9653]: USE 14400 bit/s
Mar 14 17:02:41.73: [ 9653]: USE 5 ms/scanline
Mar 14 17:02:41.73: [ 9653]: SEND file "docq/doc19.ps;00"
Mar 14 17:02:41.74: [ 9653]: USE page width 1728 pixels in 215 mm
Mar 14 17:02:41.74: [ 9653]: USE unlimited page length
Mar 14 17:02:41.74: [ 9653]: USE 3.85 line/mm
Mar 14 17:02:41.74: [ 9653]: USE 1-D MR
Mar 14 17:02:41.74: [ 9653]: SEND training at v.17 14400 bit/s
Mar 14 17:02:41.77: [ 9653]: <-- HDLC<23:FF C0 C2 86 0E CA 04 22 92 04 CE 
CE A6 C6 F6 4E 0A 04 04 04 04 04 04>
Mar 14 17:02:43.01: [ 9653]: <-- HDLC<6:FF C8 C1 00 44 18>
Mar 14 17:02:47.93: [ 9653]: --> HDLC<5:FF C8 21 57 BE>
Mar 14 17:02:47.93: [ 9653]: TRAINING succeeded
Mar 14 17:02:47.93: [ 9653]: DELAY 75 ms
Mar 14 17:02:48.04: [ 9653]: SEND begin page
Mar 14 17:02:48.77: [ 9653]: SENT 5180 bytes of data
Mar 14 17:02:48.77: [ 9653]: SEND 1D RTC
Mar 14 17:02:48.77: [ 9653]: SEND end page
Mar 14 17:02:51.40: [ 9653]: SEND send EOP (no more pages or documents)
Mar 14 17:02:51.44: [ 9653]: <-- HDLC<3:FF C8 F4>
Mar 14 17:02:55.29: [ 9653]: SEND send EOP (no more pages or documents)
Mar 14 17:02:55.33: [ 9653]: <-- HDLC<3:FF C8 F4>
Mar 14 17:02:59.11: [ 9653]: --> HDLC<5:FF C8 5F C8 E7>
Mar 14 17:02:59.11: [ 9653]: SEND recv DCN (disconnect)
Mar 14 17:02:59.15: [ 9653]: <-- HDLC<3:FF C8 DF>
Mar 14 17:03:00.05: [ 9653]: SESSION END

Hylafax 4.1.1
RH Linux 7.1 - kernel 2.4.2.-2
Standard Hayes-AT compatible Class 1 modem/fax.
("1.0" is all that I've from ati0, sorry).


Thnx in advance,

Osvaldo

P.S. (to Lee).
"Magically" doesn't means "with no men's effort".
I was simply very happy to find the bug completely fixed, without any more
configuration or investigation, that it seems to me just like a "wizard trick".
-------
Dr. Osvaldo Lucchini
Process ID Spa


    http://www.pid.it/ - email:o.lucchini@pid.it
Via Negroni,12 - 20060 Pessano con Bornago
               Thp: +39 - 029.574.9438
               Fax: +39 - 029.574.8326


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null