[hylafax-users] MPS - EOP errors....

To: "'hylafax-users@hylafax.org'" <hylafax-users@hylafax.org>
Subject: [hylafax-users] MPS - EOP errors....
From: Chris Parsons <chrisp@infotec.com.au>
Date: Thu, 14 Mar 2002 15:00:54 +1030
I've upgraded to 4.1.1 after completely removing hylafax 4.1. Hoping that
this would solve the MPS - EOP errors. However I still get them. Never had a
problem with the eicon card in nt or when I use a CAPI to send it. However
the CAPI4Hylafax does not work either. (See my previous CAPI4Hylafax post).
Im using an Eicon 4BRI card with the Eicon Diva Binary Drivers. I'm running
them in class 1 mode. This works perfectly apart from a few of our clients
fax machines. Should I re-try the cvs version would it really make much
difference. (Have that many changes been made since last release?)


Thankyou for your help.



Mar 14 02:30:57.48: [10810]: SESSION BEGIN 00000814 61882512222
Mar 14 02:30:57.48: [10810]: HylaFAX (tm) Version 4.1.1
Mar 14 02:30:57.48: [10810]: SEND FAX: JOB 369 DEST xxxx xx xxxx  COMMID
00000814 DEVICE '/dev/ttyds02'
Mar 14 02:30:57.48: [10810]: DELAY 75 ms
Mar 14 02:30:57.55: [10810]: DELAY 2600 ms
Mar 14 02:31:00.16: [10810]: <-- [4:ATZ\r]
Mar 14 02:31:00.16: [10810]: --> [3:ATZ]
Mar 14 02:31:00.16: [10810]: --> [2:OK]
Mar 14 02:31:00.16: [10810]: DELAY 3000 ms
Mar 14 02:31:03.15: [10810]: <-- [5:ATE0\r]
Mar 14 02:31:03.15: [10810]: --> [4:ATE0]
Mar 14 02:31:03.15: [10810]: --> [2:OK]
Mar 14 02:31:03.15: [10810]: <-- [5:ATV1\r]
Mar 14 02:31:03.15: [10810]: --> [2:OK]
Mar 14 02:31:03.15: [10810]: <-- [5:ATQ0\r]
Mar 14 02:31:03.15: [10810]: --> [2:OK]
Mar 14 02:31:03.15: [10810]: <-- [7:ATS0=0\r]
Mar 14 02:31:03.16: [10810]: --> [2:OK]
Mar 14 02:31:03.16: [10810]: <-- [7:ATS8=2\r]
Mar 14 02:31:03.16: [10810]: --> [2:OK]
Mar 14 02:31:03.16: [10810]: <-- [8:ATS7=60\r]
Mar 14 02:31:03.16: [10810]: --> [2:OK]
Mar 14 02:31:03.16: [10810]: <-- [12:AT+FCLASS=1\r]
Mar 14 02:31:03.16: [10810]: --> [2:OK]
Mar 14 02:31:03.16: [10810]: <-- [5:ATM0\r]
Mar 14 02:31:03.16: [10810]: --> [2:OK]
Mar 14 02:31:03.16: [10810]: <-- [12:AT+FCLASS=1\r]
Mar 14 02:31:03.25: [10810]: --> [2:OK]
Mar 14 02:31:03.26: [10810]: DIAL 0882512222
Mar 14 02:31:03.26: [10810]: <-- [15:ATDT0882512222\r]
Mar 14 02:31:22.48: [10810]: --> [7:CONNECT]
Mar 14 02:31:24.54: [10810]: --> [2:OK]
Mar 14 02:31:24.54: [10810]: REMOTE NSF "00 00 0E 00 00 00 96 0F 01 03 00 10
05 02 85 C8 08 01 49 02 45 4C 46 20 52 45 41 4C 20 45 53 54 41 54 45 20 03
E8"
Mar 14 02:31:24.54: [10810]: NSF remote fax equipment: Panasonic KX-F230 or
KX-FT21 or ...
Mar 14 02:31:24.54: [10810]: NSF remote station ID: "ELF REAL ESTATE "
Mar 14 02:31:24.54: [10810]: <-- [9:AT+FRH=3\r]
Mar 14 02:31:24.54: [10810]: --> [7:CONNECT]
Mar 14 02:31:25.30: [10810]: --> [2:OK]
Mar 14 02:31:25.30: [10810]: REMOTE CSI "82512222"
Mar 14 02:31:25.30: [10810]: <-- [9:AT+FRH=3\r]
Mar 14 02:31:25.30: [10810]: --> [7:CONNECT]
Mar 14 02:31:25.60: [10810]: --> [2:OK]
Mar 14 02:31:25.60: [10810]: REMOTE best rate 9600 bit/s
Mar 14 02:31:25.60: [10810]: REMOTE max page width 1728 pixels in 215 mm
Mar 14 02:31:25.60: [10810]: REMOTE max unlimited page length 
Mar 14 02:31:25.60: [10810]: REMOTE best vres 7.7 line/mm
Mar 14 02:31:25.60: [10810]: REMOTE best format 2-D MR
Mar 14 02:31:25.60: [10810]: REMOTE best 20 ms/scanline
Mar 14 02:31:25.60: [10810]: USE 9600 bit/s
Mar 14 02:31:25.60: [10810]: USE 20 ms/scanline
Mar 14 02:31:25.60: [10810]: SEND file "docq/doc461.ps;71"
Mar 14 02:31:25.60: [10810]: USE page width 1728 pixels in 215 mm
Mar 14 02:31:25.60: [10810]: USE unlimited page length 
Mar 14 02:31:25.60: [10810]: USE 7.7 line/mm
Mar 14 02:31:25.60: [10810]: USE 2-D MR
Mar 14 02:31:25.60: [10810]: SEND training at v.29 9600 bit/s
Mar 14 02:31:25.60: [10810]: <-- [9:AT+FTH=3\r]
Mar 14 02:31:25.75: [10810]: --> [7:CONNECT]
Mar 14 02:31:25.75: [10810]: <-- data [23]
Mar 14 02:31:25.75: [10810]: <-- data [2]
Mar 14 02:31:26.48: [10810]: --> [7:CONNECT]
Mar 14 02:31:26.48: [10810]: <-- data [6]
Mar 14 02:31:26.48: [10810]: <-- data [2]
Mar 14 02:31:27.83: [10810]: --> [2:OK]
Mar 14 02:31:27.83: [10810]: <-- [9:AT+FTS=7\r]
Mar 14 02:31:27.83: [10810]: --> [2:OK]
Mar 14 02:31:27.83: [10810]: <-- [10:AT+FTM=96\r]
Mar 14 02:31:28.14: [10810]: --> [7:CONNECT]
Mar 14 02:31:28.14: [10810]: <-- data [1024]
Mar 14 02:31:28.14: [10810]: <-- data [776]
Mar 14 02:31:28.15: [10810]: <-- data [2]
Mar 14 02:31:29.70: [10810]: --> [2:OK]
Mar 14 02:31:29.70: [10810]: <-- [9:AT+FRH=3\r]
Mar 14 02:31:32.80: [10810]: --> [0:]
Mar 14 02:31:32.80: [10810]: MODEM <Empty line>
Mar 14 02:31:32.80: [10810]: <-- data [1]
Mar 14 02:31:32.80: [10810]: --> [2:]
Mar 14 02:31:32.80: [10810]: --> [2:OK]
Mar 14 02:31:32.80: [10810]: DELAY 1500 ms
Mar 14 02:31:34.30: [10810]: SEND training at v.29 7200 bit/s
Mar 14 02:31:34.30: [10810]: <-- [9:AT+FTH=3\r]
Mar 14 02:31:34.39: [10810]: --> [7:CONNECT]
Mar 14 02:31:34.39: [10810]: <-- data [23]
Mar 14 02:31:34.39: [10810]: <-- data [2]
Mar 14 02:31:35.12: [10810]: --> [7:CONNECT]
Mar 14 02:31:35.12: [10810]: <-- data [6]
Mar 14 02:31:35.12: [10810]: <-- data [2]
Mar 14 02:31:36.47: [10810]: --> [2:OK]
Mar 14 02:31:36.47: [10810]: <-- [9:AT+FTS=7\r]
Mar 14 02:31:36.47: [10810]: --> [2:OK]
Mar 14 02:31:36.47: [10810]: <-- [10:AT+FTM=72\r]
Mar 14 02:31:36.79: [10810]: --> [7:CONNECT]
Mar 14 02:31:36.79: [10810]: <-- data [1024]
Mar 14 02:31:36.79: [10810]: <-- data [326]
Mar 14 02:31:36.79: [10810]: <-- data [2]
Mar 14 02:31:38.35: [10810]: --> [2:OK]
Mar 14 02:31:38.35: [10810]: <-- [9:AT+FRH=3\r]
Mar 14 02:31:41.44: [10810]: --> [0:]
Mar 14 02:31:41.44: [10810]: MODEM <Empty line>
Mar 14 02:31:41.44: [10810]: <-- data [1]
Mar 14 02:31:41.44: [10810]: --> [2:]
Mar 14 02:31:41.44: [10810]: --> [2:OK]
Mar 14 02:31:41.44: [10810]: DELAY 1500 ms
Mar 14 02:31:42.94: [10810]: SEND training at v.27ter 4800 bit/s
Mar 14 02:31:42.94: [10810]: <-- [9:AT+FTH=3\r]
Mar 14 02:31:43.03: [10810]: --> [7:CONNECT]
Mar 14 02:31:43.03: [10810]: <-- data [23]
Mar 14 02:31:43.03: [10810]: <-- data [2]
Mar 14 02:31:43.76: [10810]: --> [7:CONNECT]
Mar 14 02:31:43.76: [10810]: <-- data [6]
Mar 14 02:31:43.76: [10810]: <-- data [2]
Mar 14 02:31:45.11: [10810]: --> [2:OK]
Mar 14 02:31:45.11: [10810]: <-- [9:AT+FTS=7\r]
Mar 14 02:31:45.11: [10810]: --> [2:OK]
Mar 14 02:31:45.11: [10810]: <-- [10:AT+FTM=48\r]
Mar 14 02:31:46.11: [10810]: --> [7:CONNECT]
Mar 14 02:31:46.11: [10810]: <-- data [900]
Mar 14 02:31:46.11: [10810]: <-- data [2]
Mar 14 02:31:47.67: [10810]: --> [2:OK]
Mar 14 02:31:47.67: [10810]: <-- [9:AT+FRH=3\r]
Mar 14 02:31:48.39: [10810]: --> [7:CONNECT]
Mar 14 02:31:49.56: [10810]: --> [2:OK]
Mar 14 02:31:49.56: [10810]: TRAINING succeeded
Mar 14 02:31:49.56: [10810]: DELAY 75 ms
Mar 14 02:31:49.63: [10810]: <-- [10:AT+FTM=48\r]
Mar 14 02:31:50.64: [10810]: --> [7:CONNECT]
Mar 14 02:31:50.64: [10810]: SEND begin page
Mar 14 02:31:50.64: [10810]: <-- data [1025]
Mar 14 02:31:50.64: [10810]: <-- data [1029]
Mar 14 02:31:50.64: [10810]: <-- data [1034]
Mar 14 02:31:50.64: [10810]: <-- data [1035]
Mar 14 02:31:50.64: [10810]: <-- data [1028]
Mar 14 02:31:50.64: [10810]: <-- data [1034]
Mar 14 02:31:50.64: [10810]: <-- data [1035]
Mar 14 02:31:53.76: [10810]: <-- data [1033]
Mar 14 02:31:53.76: [10810]: <-- data [1029]
Mar 14 02:31:53.76: [10810]: <-- data [1029]
Mar 14 02:31:53.76: [10810]: <-- data [1030]
Mar 14 02:31:53.76: [10810]: <-- data [1029]
Mar 14 02:32:04.00: [10810]: <-- data [1034]
Mar 14 02:32:04.00: [10810]: <-- data [1032]
Mar 14 02:32:04.00: [10810]: <-- data [1035]
Mar 14 02:32:04.00: [10810]: <-- data [1032]
Mar 14 02:32:04.00: [10810]: <-- data [1033]
Mar 14 02:32:10.83: [10810]: <-- data [1033]
Mar 14 02:32:10.83: [10810]: <-- data [1035]
Mar 14 02:32:10.83: [10810]: <-- data [1034]
Mar 14 02:32:10.83: [10810]: <-- data [1034]
Mar 14 02:32:10.83: [10810]: <-- data [1037]
Mar 14 02:32:21.06: [10810]: <-- data [1033]
Mar 14 02:32:21.07: [10810]: <-- data [1034]
Mar 14 02:32:21.07: [10810]: <-- data [1033]
Mar 14 02:32:21.07: [10810]: <-- data [273]
Mar 14 02:32:21.07: [10810]: SENT 25868 bytes of data
Mar 14 02:32:21.07: [10810]: <-- data [1035]
Mar 14 02:32:21.07: [10810]: <-- data [1034]
Mar 14 02:32:31.30: [10810]: <-- data [1028]
Mar 14 02:32:31.30: [10810]: <-- data [1024]
Mar 14 02:32:31.31: [10810]: <-- data [1024]
Mar 14 02:32:31.31: [10810]: <-- data [1024]
Mar 14 02:32:31.31: [10810]: <-- data [1024]
Mar 14 02:32:38.58: [10810]: <-- data [1024]
Mar 14 02:32:38.58: [10810]: <-- data [1025]
Mar 14 02:32:38.58: [10810]: <-- data [1026]
Mar 14 02:32:38.58: [10810]: <-- data [1024]
Mar 14 02:32:38.58: [10810]: <-- data [1025]
Mar 14 02:32:45.41: [10810]: <-- data [1026]
Mar 14 02:32:45.41: [10810]: <-- data [1025]
Mar 14 02:32:45.41: [10810]: <-- data [175]
Mar 14 02:32:45.41: [10810]: SENT 14511 bytes of data
Mar 14 02:32:45.41: [10810]: SEND 2D RTC
Mar 14 02:32:45.41: [10810]: <-- data [30]
Mar 14 02:32:45.41: [10810]: <-- data [2]
Mar 14 02:32:45.41: [10810]: SEND end page
Mar 14 02:32:58.05: [10810]: --> [2:OK]
Mar 14 02:32:58.05: [10810]: <-- [9:AT+FTS=9\r]
Mar 14 02:32:58.05: [10810]: --> [2:OK]
Mar 14 02:32:58.05: [10810]: SEND send EOP (no more pages or documents)
Mar 14 02:32:58.05: [10810]: <-- [9:AT+FTH=3\r]
Mar 14 02:32:58.15: [10810]: --> [7:CONNECT]
Mar 14 02:32:58.15: [10810]: <-- data [3]
Mar 14 02:32:58.15: [10810]: <-- data [2]
Mar 14 02:32:59.45: [10810]: --> [2:OK]
Mar 14 02:32:59.45: [10810]: <-- [9:AT+FRH=3\r]
Mar 14 02:33:02.54: [10810]: --> [0:]
Mar 14 02:33:02.54: [10810]: MODEM <Empty line>
Mar 14 02:33:02.54: [10810]: <-- data [1]
Mar 14 02:33:02.54: [10810]: --> [2:]
Mar 14 02:33:02.54: [10810]: --> [2:OK]
Mar 14 02:33:02.54: [10810]: SEND send EOP (no more pages or documents)
Mar 14 02:33:02.54: [10810]: <-- [9:AT+FTH=3\r]
Mar 14 02:33:02.63: [10810]: --> [7:CONNECT]
Mar 14 02:33:02.63: [10810]: <-- data [3]
Mar 14 02:33:02.63: [10810]: <-- data [2]
Mar 14 02:33:03.93: [10810]: --> [2:OK]
Mar 14 02:33:03.93: [10810]: <-- [9:AT+FRH=3\r]
Mar 14 02:33:07.02: [10810]: --> [0:]
Mar 14 02:33:07.02: [10810]: MODEM <Empty line>
Mar 14 02:33:07.02: [10810]: <-- data [1]
Mar 14 02:33:07.02: [10810]: --> [2:]
Mar 14 02:33:07.02: [10810]: --> [2:OK]
Mar 14 02:33:07.02: [10810]: SEND send EOP (no more pages or documents)
Mar 14 02:33:07.02: [10810]: <-- [9:AT+FTH=3\r]
Mar 14 02:33:07.11: [10810]: --> [7:CONNECT]
Mar 14 02:33:07.11: [10810]: <-- data [3]
Mar 14 02:33:07.11: [10810]: <-- data [2]
Mar 14 02:33:08.41: [10810]: --> [2:OK]
Mar 14 02:33:08.41: [10810]: <-- [9:AT+FRH=3\r]
Mar 14 02:33:11.50: [10810]: --> [0:]
Mar 14 02:33:11.50: [10810]: MODEM <Empty line>
Mar 14 02:33:11.50: [10810]: <-- data [1]
Mar 14 02:33:11.50: [10810]: --> [2:]
Mar 14 02:33:11.50: [10810]: --> [2:OK]
Mar 14 02:33:11.50: [10810]: No response to MPS or EOP repeated 3 tries
Mar 14 02:33:11.50: [10810]: <-- [9:AT+FTH=3\r]
Mar 14 02:33:11.59: [10810]: --> [7:CONNECT]
Mar 14 02:33:11.59: [10810]: <-- data [3]
Mar 14 02:33:11.59: [10810]: <-- data [2]
Mar 14 02:33:12.89: [10810]: --> [2:OK]
Mar 14 02:33:12.89: [10810]: <-- [5:ATH0\r]
Mar 14 02:33:12.98: [10810]: --> [2:OK]
Mar 14 02:33:12.99: [10810]: SESSION END


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
Follow-Ups:
- Re: [hylafax-users] MPS - EOP errors....
  - From: Lee Howard
Prev by Date: Re: [hylafax-users] problems with windows 2000 and whfc
Next by Date: Re: [hylafax-users] Inittab question
Previous by thread: Re: [hylafax-users] Other config issues
Next by thread: Re: [hylafax-users] MPS - EOP errors....
Index(es):
- Main
- Thread
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services