|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] CAPI4HylaFax
<Sorry for the extra posts>
To Stimulate those interested users with more problems, the only way to
bypass all the problems is to get it working is to run the Eicon board in
Class 2 mode as this avoids all the MPS and EOP errors. However when faxing
to our own local fax machine it hangs up with a +FHNG: 10. This is an
unspecified phase A error. This will normally be at the end of the second
page of the fax. Refax's get to exactly the same location. What could be
going on?
The Log is:
Mar 12 09:36:02.62: [ 2445]: SESSION BEGIN 00000692 61882xxxxxx
Mar 12 09:36:02.62: [ 2445]: HylaFAX (tm) Version 4.1
Mar 12 09:36:02.62: [ 2445]: SEND FAX: JOB 342 DEST 82xxxxxx COMMID 00000692
Mar 12 09:36:02.62: [ 2445]: DEVICE '/dev/ttyds02'
Mar 12 09:36:02.62: [ 2445]: DELAY 75 ms
Mar 12 09:36:02.69: [ 2445]: DELAY 2600 ms
Mar 12 09:36:05.30: [ 2445]: <-- [4:ATZ\r]
Mar 12 09:36:05.30: [ 2445]: --> [3:ATZ]
Mar 12 09:36:05.30: [ 2445]: --> [2:OK]
Mar 12 09:36:05.30: [ 2445]: <-- [5:ATE0\r]
Mar 12 09:36:05.30: [ 2445]: --> [4:ATE0]
Mar 12 09:36:05.30: [ 2445]: --> [2:OK]
Mar 12 09:36:05.30: [ 2445]: <-- [5:ATV1\r]
Mar 12 09:36:05.30: [ 2445]: --> [2:OK]
Mar 12 09:36:05.30: [ 2445]: <-- [5:ATQ0\r]
Mar 12 09:36:05.30: [ 2445]: --> [2:OK]
Mar 12 09:36:05.30: [ 2445]: <-- [7:ATS0=0\r]
Mar 12 09:36:05.30: [ 2445]: --> [2:OK]
Mar 12 09:36:05.30: [ 2445]: <-- [7:ATS8=2\r]
Mar 12 09:36:05.30: [ 2445]: --> [2:OK]
Mar 12 09:36:05.30: [ 2445]: <-- [8:ATS7=60\r]
Mar 12 09:36:05.30: [ 2445]: --> [2:OK]
Mar 12 09:36:05.30: [ 2445]: <-- [12:AT+FCLASS=2\r]
Mar 12 09:36:05.30: [ 2445]: --> [2:OK]
Mar 12 09:36:05.30: [ 2445]: <-- [10:AT+FTBC=0\r]
Mar 12 09:36:05.30: [ 2445]: --> [5:ERROR]
Mar 12 09:36:05.30: [ 2445]: MODEM Command error
Mar 12 09:36:05.30: [ 2445]: <-- [10:AT+FBOR=0\r]
Mar 12 09:36:05.30: [ 2445]: --> [2:OK]
Mar 12 09:36:05.30: [ 2445]: <-- [13:AT+FPHCTO=30\r]
Mar 12 09:36:05.30: [ 2445]: --> [2:OK]
Mar 12 09:36:05.30: [ 2445]: <-- [24:AT+FDCC=1,5,0,2,0,0,0,0\r]
Mar 12 09:36:05.30: [ 2445]: --> [2:OK]
Mar 12 09:36:05.30: [ 2445]: <-- [5:ATM0\r]
Mar 12 09:36:05.30: [ 2445]: --> [2:OK]
Mar 12 09:36:05.30: [ 2445]: <-- [12:AT+FCLASS=2\r]
Mar 12 09:36:05.39: [ 2445]: --> [2:OK]
Mar 12 09:36:05.39: [ 2445]: <-- [10:AT+FTBC=0\r]
Mar 12 09:36:05.49: [ 2445]: --> [5:ERROR]
Mar 12 09:36:05.49: [ 2445]: MODEM Command error
Mar 12 09:36:05.49: [ 2445]: <-- [10:AT+FBOR=0\r]
Mar 12 09:36:05.59: [ 2445]: --> [2:OK]
Mar 12 09:36:05.59: [ 2445]: <-- [13:AT+FPHCTO=30\r]
Mar 12 09:36:05.69: [ 2445]: --> [2:OK]
Mar 12 09:36:05.69: [ 2445]: <-- [24:AT+FDCC=1,5,0,2,0,0,0,0\r]
Mar 12 09:36:05.79: [ 2445]: --> [2:OK]
Mar 12 09:36:05.79: [ 2445]: <-- [21:AT+FLID="1300xxxxxx"\r]
Mar 12 09:36:05.89: [ 2445]: --> [2:OK]
Mar 12 09:36:05.90: [ 2445]: DIAL 82787447
Mar 12 09:36:05.90: [ 2445]: <-- [13:ATDT82787447\r]
Mar 12 09:36:20.16: [ 2445]: --> [5:+FCON]
Mar 12 09:36:20.16: [ 2445]: --> [28:+FCSI:" 088xxxxxx+1"]
Mar 12 09:36:20.16: [ 2445]: REMOTE CSI "088xxxxxx+1"
Mar 12 09:36:20.16: [ 2445]: --> [22:+FDIS: 1,3,0,0,0,0,0,0]
Mar 12 09:36:20.16: [ 2445]: --> [2:OK]
Mar 12 09:36:20.17: [ 2445]: REMOTE best rate 9600 bit/s
Mar 12 09:36:20.17: [ 2445]: REMOTE max page width 1728 pixels in 215 mm
Mar 12 09:36:20.17: [ 2445]: REMOTE max A4 page length (297 mm)
Mar 12 09:36:20.17: [ 2445]: REMOTE best vres 7.7 line/mm
Mar 12 09:36:20.17: [ 2445]: REMOTE best format 1-D MR
Mar 12 09:36:20.17: [ 2445]: REMOTE best 0 ms/scanline
Mar 12 09:36:20.17: [ 2445]: USE 9600 bit/s
Mar 12 09:36:20.17: [ 2445]: USE 0 ms/scanline
Mar 12 09:36:20.17: [ 2445]: SEND file "docq/doc433.ps;00"
Mar 12 09:36:20.17: [ 2445]: USE page width 1728 pixels in 215 mm
Mar 12 09:36:20.17: [ 2445]: USE A4 page length (297 mm)
Mar 12 09:36:20.17: [ 2445]: USE 3.85 line/mm
Mar 12 09:36:20.17: [ 2445]: USE 1-D MR
Mar 12 09:36:20.17: [ 2445]: <-- [24:AT+FDIS=0,3,0,0,0,0,0,0\r]
Mar 12 09:36:20.26: [ 2445]: --> [2:OK]
Mar 12 09:36:20.26: [ 2445]: <-- [7:AT+FDT\r]
Mar 12 09:36:25.68: [ 2445]: --> [22:+FDCS: 0,3,0,2,0,0,0,0]
Mar 12 09:36:25.91: [ 2445]: --> [7:CONNECT]
Mar 12 09:36:25.91: [ 2445]: SEND wait for XON
Mar 12 09:36:25.91: [ 2445]: --> [1:]
Mar 12 09:36:25.91: [ 2445]: SEND begin page
Mar 12 09:36:33.88: [ 2445]: SENT 18384 bytes of data
Mar 12 09:36:39.00: [ 2445]: SEND end page
Mar 12 09:36:39.09: [ 2445]: --> [2:OK]
Mar 12 09:36:39.09: [ 2445]: SEND send MPS (more pages, same document)
Mar 12 09:36:39.09: [ 2445]: <-- [9:AT+FET=0\r]
Mar 12 09:36:56.31: [ 2445]: --> [9:+FHNG: 10]
Mar 12 09:36:56.31: [ 2445]: REMOTE HANGUP: Unspecified Phase A error (code
10)
Mar 12 09:36:56.31: [ 2445]: <-- [5:ATH0\r]
Mar 12 09:36:56.31: [ 2445]: --> [2:OK]
Mar 12 09:36:56.32: [ 2445]: SESSION END
-----Original Message-----
From: hylafax-users-bounce@hylafax.org
[mailto:hylafax-users-bounce@hylafax.org]On Behalf Of Chris Parsons
Sent: Tuesday, 12 March 2002 9:23
To: 'hylafax-users@hylafax.org'
Subject: Re: [hylafax-users] CAPI4HylaFax
To sum up my two posts, CAPI4HylaFax and CVS version of SendFax Broken?:
I'm running an eicon card on RHLinux 7.0 with kernal version 2.2.16-22 With
HylaFax 4.1.1. I'm using the Divas for Linux Server Drivers version 1.0
Build 102-393 with a Diva Server 4BRI card.
The Card Worked Well for faxing under nt however had problems with faxes. So
we decided to switch to HylaFax.
The original install used the ttyds0X ports provided by the Eicon driver.
Using Class 2 mode it would not negotiate properly with various fax
machines. In class 1 mode it appeared to work alright but come full
production scale many faxes failed with the MPS / EOP error thats been
documented many times in the archive of this list. I follow the solution I
found to download the CVS version and compile. From then on the error was "
send program terminated abnormally with error 0x06. The archives werent too
helpfull in this case. It was suggested to set logging to max, they already
are and produce nothing of note to help the situation.
I decided at this point to switch to the CAPI4HylaFax. However documentation
is very limited and after getting one line to work, any attempt to get more
than that caused the Connection dropped with Reason 0x2002 (Illegal
Controller / PLCI / NCCI.) Looking through the sources for capi4hylafax did
not help as it appears to be when it looks for the ISDN channel. I could
even replicate this error with only one line installed.
Any Ideas? Which way should I go?
Thanks for any help.
Chris.
-------- The Capi4linux errors.
Mar 11 12:34:19.92: [ 3935]: SESSION BEGIN 00000328 (null)
Mar 11 12:34:19.93: [ 3935]: SEND FAX: JOB 328 DEST 08xxxxxxxx COMMID
00000634
Mar 11 12:34:19.93: [ 3935]: Try to send a fax to number 08xxxxxxxx in
Hylafax mode.
Mar 11 12:34:19.93: [ 3935]: Dial and starting transfer of TIFF-File
docq/doc418.ps;01 with fine resolution.
Mar 11 12:34:19.93: [ 3937]: Connection dropped with Reason 0x2002 (Illegal
Controller / PLCI / NCCI).
Mar 11 12:34:19.93: [ 3937]: SESSION END
-----Original Message-----
From: hylafax-users-bounce@hylafax.org
[mailto:hylafax-users-bounce@hylafax.org]On Behalf Of Chris Parsons
Sent: Monday, 11 March 2002 12:54
To: 'hylafax-users@hylafax.org'
Subject: [hylafax-users] CAPI4HylaFax
I rebuilt my version of Hylafax from CVS because I was getting massive MPS,
EOP problems to certain machines. However that broke the fax sending
completely. I reinstalled and Install CAPI4HylaFax because I have an eicon 4
Bri card. Most of the time it works how ever every so often the log reports
something similar to the below.
What would cause this problem???:
Mar 11 12:34:19.92: [ 3935]: SESSION BEGIN 00000328 (null)
Mar 11 12:34:19.93: [ 3935]: SEND FAX: JOB 328 DEST 08xxxxxxxx COMMID
00000634
Mar 11 12:34:19.93: [ 3935]: Try to send a fax to number 08xxxxxxxx in
Hylafax mode.
Mar 11 12:34:19.93: [ 3935]: Dial and starting transfer of TIFF-File
docq/doc418.ps;01 with fine resolution.
Mar 11 12:34:19.93: [ 3937]: Connection dropped with Reason 0x2002 (Illegal
Controller / PLCI / NCCI).
Mar 11 12:34:19.93: [ 3937]: SESSION END
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
