Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Modems that do 2D-MR compression vs class 1let HylaFAX do 2D-MR



Use class 1, it is better by far, and your machine should have no 
trouble.  I send aproxmately 1200 faxes a day on a pool of 6 courier 
modems with a similar machine, with more than enough headroom that 16 
modems shouldn't be an issue either.

Charlie

Mau, Jonathan wrote:

> Hello:
>
> It is my understanding, and it may be incorrect, that most faxmodems 
> only have 1D-MH capability and do not have 2D-MR?  Is this correct?  
> We are using USR Courier v.everything modems and they do not do 2D-MR.
>
> Does anyone have any make and model numbers of modems that will do 2D-MR?
>
> As our fax hardware is a 700Mhz pentium machine, does it even make 
> sense to try to source a modem with 2D-MR?  Or should we just run all 
> our modems class 1 and get 2D-MR by way of HylaFAX implementing the 
> T.4 protocol instead of the modem firmware.
>
> We send about 1000 FAXs a day with a 16 modem pool.
>
> Does anyone have a config file for class 1 operation for the USR 
> Courier v.everything modems?
>
> Thanks.
>



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services