|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] mps,rtn, canon fax machines
OK, patchpatchpatch installed, compiled, tried out.
Log below: no error, status DONE.
But the remote still has no paper coming out from their fax machine....
Next step?
What about firmware upgrade? Who knows where to find new firmware?
(ideas like the manufacturers website not working, there is nothing)
Mar 01 12:34:49.05: [24806]: SESSION BEGIN 00004361 3613689632
Mar 01 12:34:49.05: [24806]: HylaFAX (tm) Version 4.1
Mar 01 12:34:49.05: [24806]: SEND FAX: JOB 190 DEST 3689632 COMMID 00004361
Mar 01 12:34:49.05: [24806]: DEVICE '/dev/ttyS0'
Mar 01 12:34:49.05: [24806]: DELAY 75 ms
Mar 01 12:34:49.13: [24806]: DELAY 2600 ms
Mar 01 12:34:51.73: [24806]: <-- [4:ATZ\r]
Mar 01 12:34:51.80: [24806]: --> [2:OK]
Mar 01 12:34:51.80: [24806]: <-- [5:AT&F\r]
Mar 01 12:34:51.81: [24806]: --> [4:AT&F]
Mar 01 12:34:51.81: [24806]: --> [2:OK]
Mar 01 12:34:51.81: [24806]: <-- [5:ATE0\r]
Mar 01 12:34:51.82: [24806]: --> [4:ATE0]
Mar 01 12:34:51.82: [24806]: --> [2:OK]
Mar 01 12:34:51.82: [24806]: <-- [5:ATV1\r]
Mar 01 12:34:51.83: [24806]: --> [2:OK]
Mar 01 12:34:51.83: [24806]: <-- [5:ATQ0\r]
Mar 01 12:34:51.84: [24806]: --> [2:OK]
Mar 01 12:34:51.84: [24806]: <-- [7:ATS0=0\r]
Mar 01 12:34:51.85: [24806]: --> [2:OK]
Mar 01 12:34:51.85: [24806]: <-- [7:ATS8=2\r]
Mar 01 12:34:51.86: [24806]: --> [2:OK]
Mar 01 12:34:51.86: [24806]: <-- [8:ATS7=60\r]
Mar 01 12:34:51.87: [24806]: --> [2:OK]
Mar 01 12:34:51.87: [24806]: <-- [6:AT&K3\r]
Mar 01 12:34:51.88: [24806]: --> [2:OK]
Mar 01 12:34:51.88: [24806]: <-- [6:AT&D2\r]
Mar 01 12:34:51.89: [24806]: --> [2:OK]
Mar 01 12:34:51.89: [24806]: <-- [6:AT&C1\r]
Mar 01 12:34:51.90: [24806]: --> [2:OK]
Mar 01 12:34:51.90: [24806]: <-- [12:AT+FCLASS=1\r]
Mar 01 12:34:51.91: [24806]: --> [2:OK]
Mar 01 12:34:51.91: [24806]: <-- [19:AT+FCLASS=0;+FAE=1\r]
Mar 01 12:34:51.92: [24806]: --> [2:OK]
Mar 01 12:34:51.92: [24806]: <-- [5:ATM0\r]
Mar 01 12:34:51.93: [24806]: --> [2:OK]
Mar 01 12:34:51.93: [24806]: <-- [12:AT+FCLASS=1\r]
Mar 01 12:34:52.04: [24806]: --> [2:OK]
Mar 01 12:34:52.05: [24806]: DIAL 3689632
Mar 01 12:34:52.05: [24806]: <-- [14:ATDT0,3689632\r]
Mar 01 12:35:10.58: [24806]: --> [7:CONNECT]
Mar 01 12:35:12.34: [24806]: --> [2:OK]
Mar 01 12:35:12.34: [24806]: REMOTE NSF "00 00 11 80 00 8A 49 10 42 4D 46
20 4E 49 4B 20 20 20 20 20 20 20 20 20 00 59 00 80 80 D8 86 01 01 01 01 00
BB"
Mar 01 12:35:12.34: [24806]: NSF remote fax equipment: Canon
Mar 01 12:35:12.34: [24806]: NSF remote station ID: "BMF NIK "
Mar 01 12:35:12.34: [24806]: <-- [9:AT+FRH=3\r]
Mar 01 12:35:12.35: [24806]: --> [7:CONNECT]
Mar 01 12:35:13.03: [24806]: --> [2:OK]
Mar 01 12:35:13.03: [24806]: REMOTE CSI "+36 1 368 9632"
Mar 01 12:35:13.03: [24806]: <-- [9:AT+FRH=3\r]
Mar 01 12:35:13.04: [24806]: --> [7:CONNECT]
Mar 01 12:35:13.29: [24806]: --> [2:OK]
Mar 01 12:35:13.29: [24806]: REMOTE best rate 14400 bit/s
Mar 01 12:35:13.29: [24806]: REMOTE max page width 1728 pixels in 215 mm
Mar 01 12:35:13.29: [24806]: REMOTE max unlimited page length
Mar 01 12:35:13.29: [24806]: REMOTE best vres 7.7 line/mm
Mar 01 12:35:13.29: [24806]: REMOTE best format 2-D MMR
Mar 01 12:35:13.29: [24806]: REMOTE supports T.30 Annex A, ECM
Mar 01 12:35:13.29: [24806]: REMOTE best 10 ms/scanline
Mar 01 12:35:13.29: [24806]: USE 14400 bit/s
Mar 01 12:35:13.29: [24806]: USE 10 ms/scanline
Mar 01 12:35:13.29: [24806]: SEND file "docq/doc190.ps;40"
Mar 01 12:35:13.29: [24806]: USE page width 1728 pixels in 215 mm
Mar 01 12:35:13.29: [24806]: USE unlimited page length
Mar 01 12:35:13.29: [24806]: USE 3.85 line/mm
Mar 01 12:35:13.29: [24806]: USE 2-D MR
Mar 01 12:35:13.29: [24806]: SEND training at v.17 14400 bit/s
Mar 01 12:35:13.29: [24806]: <-- [9:AT+FTH=3\r]
Mar 01 12:35:13.33: [24806]: --> [7:CONNECT]
Mar 01 12:35:13.33: [24806]: <-- data [23]
Mar 01 12:35:13.33: [24806]: <-- data [2]
Mar 01 12:35:15.11: [24806]: --> [7:CONNECT]
Mar 01 12:35:15.11: [24806]: <-- data [6]
Mar 01 12:35:15.11: [24806]: <-- data [2]
Mar 01 12:35:15.55: [24806]: --> [2:OK]
Mar 01 12:35:15.55: [24806]: <-- [9:AT+FTS=7\r]
Mar 01 12:35:15.63: [24806]: --> [2:OK]
Mar 01 12:35:15.63: [24806]: <-- [11:AT+FTM=145\r]
Mar 01 12:35:15.66: [24806]: --> [7:CONNECT]
Mar 01 12:35:15.66: [24806]: <-- data [1024]
Mar 01 12:35:15.66: [24806]: <-- data [1024]
Mar 01 12:35:15.66: [24806]: <-- data [652]
Mar 01 12:35:15.66: [24806]: <-- data [2]
Mar 01 12:35:18.78: [24806]: --> [2:OK]
Mar 01 12:35:18.78: [24806]: <-- [9:AT+FRH=3\r]
Mar 01 12:35:19.14: [24806]: --> [7:CONNECT]
Mar 01 12:35:20.06: [24806]: --> [2:OK]
Mar 01 12:35:20.06: [24806]: TRAINING succeeded
Mar 01 12:35:20.06: [24806]: <-- [11:AT+FTM=146\r]
Mar 01 12:35:20.09: [24806]: --> [7:CONNECT]
Mar 01 12:35:20.09: [24806]: SEND begin page
Mar 01 12:35:20.09: [24806]: <-- data [1024]
Mar 01 12:35:20.09: [24806]: <-- data [1024]
Mar 01 12:35:20.09: [24806]: <-- data [1028]
Mar 01 12:35:20.09: [24806]: <-- data [1030]
Mar 01 12:35:20.09: [24806]: <-- data [1032]
Mar 01 12:35:20.66: [24806]: <-- data [1031]
Mar 01 12:35:21.19: [24806]: <-- data [1028]
Mar 01 12:35:21.73: [24806]: <-- data [512]
Mar 01 12:35:21.99: [24806]: SENT 7673 bytes of data
Mar 01 12:35:21.99: [24806]: SEND 2D RTC
Mar 01 12:35:21.99: [24806]: <-- data [30]
Mar 01 12:35:21.99: [24806]: <-- data [2]
Mar 01 12:35:21.99: [24806]: SEND end page
Mar 01 12:35:24.73: [24806]: --> [2:OK]
Mar 01 12:35:24.73: [24806]: <-- [9:AT+FTS=9\r]
Mar 01 12:35:24.83: [24806]: --> [2:OK]
Mar 01 12:35:24.83: [24806]: SEND send EOP (no more pages or documents)
Mar 01 12:35:24.83: [24806]: <-- [9:AT+FTH=3\r]
Mar 01 12:35:24.86: [24806]: --> [7:CONNECT]
Mar 01 12:35:24.86: [24806]: <-- data [3]
Mar 01 12:35:24.86: [24806]: <-- data [2]
Mar 01 12:35:26.18: [24806]: --> [2:OK]
Mar 01 12:35:26.18: [24806]: <-- [9:AT+FRH=3\r]
Mar 01 12:35:26.51: [24806]: --> [7:CONNECT]
Mar 01 12:35:27.30: [24806]: --> [2:OK]
Mar 01 12:35:27.30: [24806]: SEND recv RTN (retrain negative)
Mar 01 12:35:27.30: [24806]: SEND FAX (00004361): FROM x TO 3689632 (page 1
of 1 sent in 0:14)
Mar 01 12:35:27.30: [24806]: SEND FAX (00004361): FROM x TO 3689632
(docq/doc190.ps;40 sent in 0:14)
Mar 01 12:35:27.30: [24806]: <-- [9:AT+FTH=3\r]
Mar 01 12:35:27.33: [24806]: --> [7:CONNECT]
Mar 01 12:35:27.33: [24806]: <-- data [3]
Mar 01 12:35:27.33: [24806]: <-- data [2]
Mar 01 12:35:28.65: [24806]: --> [2:OK]
Mar 01 12:35:28.65: [24806]: <-- [5:ATH0\r]
Mar 01 12:35:29.52: [24806]: --> [2:OK]
Mar 01 12:35:29.52: [24806]: SESSION END
Dobos Sandor
IBCnet Hungary Ltd.
Giulio Orsero
<giulioo@pobox.com> To: hylafax-users@hylafax.org
Sent by: cc:
hylafax-users-bounce@h Subject: Re: [hylafax-users] mps,rtn, canon fax machines
ylafax.org
2002.03.01 13:02
On Fri, 1 Mar 2002 12:46:51 +0100, dobos_s@ibcnet.hu wrote:
>As You can see below I reinstalled the FTS patch (with the "failed->retry
>patchpatch :-)), and
>set the RTNHandlingMethod to Ignore.
>The fax failed, the remote didnt got anything, FaxQueuer notified me that
>fax failed.
>What should I do next?
You are not lucky.
4.1 had a problem where RTNHandlingMethod would not work as expected and
produced the "internal botch" you got.
So, either use 4.1.1 or apply patch
==
--- hylafax/faxd/Class1Send.c++.old Sat May 26 21:05:25 2001
+++ hylafax/faxd/Class1Send.c++ Sun Oct 14 20:39:56 2001
@@ -330,7 +330,7 @@
if (status != send_ok)
return (status);
}
- break;
+ continue;
case RTN_GIVEUP:
emsg = "Unable to transmit page"
" (giving up after RTN)";
==
--
giulioo@pobox.com
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
