Re: [hylafax-users] mps,rtn, canon fax machines

[Lee Howard <faxguy@deanox.com>]

On 2002.02.28 07:01 dobos_s@IBCnet.hu wrote:
> Hi!
> 
> The only problem I have with hylafax (4.1) is that with CANON (only)
> peers
> I cannot send faxes.
> Log is below.
> Yes, I tried the FTS and EOP/MPS-related time patches too. Nothing
> changed.
...
> Feb 28 14:08:38.28: [20912]: SEND end page
> Feb 28 14:08:41.02: [20912]: --> [2:OK]
> Feb 28 14:08:41.02: [20912]: DELAY 75 ms
> Feb 28 14:08:41.10: [20912]: SEND send MPS (more pages, same document)
> Feb 28 14:08:41.10: [20912]: <-- [9:AT+FTH=3\r]
> Feb 28 14:08:41.13: [20912]: --> [7:CONNECT]
> Feb 28 14:08:41.13: [20912]: <-- data [3]
> Feb 28 14:08:41.13: [20912]: <-- data [2]
> Feb 28 14:08:42.45: [20912]: --> [2:OK]
> Feb 28 14:08:42.45: [20912]: <-- [9:AT+FRH=3\r]
> Feb 28 14:08:45.55: [20912]: --> [0:]
> Feb 28 14:08:45.55: [20912]: MODEM <Empty line>

No, you're not using the +FTS patch.

At this point it pretty much indicates that the page we just sent never 
got there or we lost synchronicity just now because the remote is a bit 
slow.  In your case, because we repeat the MPS signal three times and hear 
no response, we can assume the prior (that they never got the page).

Using the +FTS patch is a good place to start to diagnose this.  Upgrade 
to 4.1.1 (it has the +FTS patch and more goodies), and if that doesn't 
help you'll have to start adjusting Class1Send*WaitCmd parameters.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null