|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] TagLine not at top of page
Hi,
can't figure out why my "TagIdentiferFormat"-String is not set on top of each
site (see my atteched configfiles).
Thanks,
Marcus
--
,---- [ Marcus Schopen ]
| (0>
| //\ P.O. Box 10 25 25
| V_/_ D-33525 Bielefeld, Germany
|
`----
#
# HylaFAX Client-Server Protocol Configuration.
#
# Consult hfaxd(1M) for information on the contents
# of this file. Note that pathnames specified in
# this file are relative to the root of the spooling
# area because hfaxd uses chroot to confine client
# accesses to the server's filesystem.
#
LogFacility: daemon # syslog facility (want this 1st))
ServerTracing: 0x001 # just server operation
#IdleTimeout: 900 # initial client idle timeout (secs)
#MaxIdleTimeout: 7200 # max client idle timeout (secs)
#MaxLoginAttempts: 5 # max # login attempts before disconnect
#MaxAdminAttempts: 5 # max # admin attempts before disconnect
#MaxConsecutiveBadCmds: 10 # max # invalid cmds before disconnect
#FaxContact: FaxMaster # who gets questions/complaints
#UserAccessFile: "/etc/hosts.hfaxd" # user+host access control file
#ShutdownFile: "/etc/shutdown" # server shutdown control filename
#XferLogFile: "/etc/clientlog" # for logging client file transfers
#FaxQFIFOName: "/FIFO" # FIFO name for talking to faxq process
#
# The default format used to return job status queries.
# Note that clients can override this with JOBFMT.
#
#JobFmt: "%-3j %3i %1a %6.6o %-12.12e %5P %5D %7z %.25s"
#
# The default format used to return recvq status queries.
# Note that clients can override this with RCVFMT.
#
#RcvFmt: "%-7m %4p%1z %-8.8o %14.14s %7t %f"
#
# The default format used to return modem status queries.
# Note that clients can override this with MODEMFMT.
#
#ModemFmt: "Modem %m (%n): %s"
#
# The default format used to return file-oriented
# directory listings.
# Note that clients can override this with FILEFMT.
#
#FileFmt: "%-7p %3l %8o %8s %-12.12m %.48f"
#
# SNPP-specific parameters.
#
#MaxMsgLength: 128 # max pager message length
#PagerIDMapFile: "/etc/pagermap" # file with pager ID mapping rules
#
# The following three items define the mapping from
# SNPP service level to job scheduling priority and
# expiration (kill) time. Each item should have a
# list of 12 values that define the mapping for service
# levels 0 through 11 (first item is level 0, second
# item level 1, ... etc.).
#
#PriorityMap: "63 127 127 127 127 127 127 127 127 127 127 127"
#RetryTimeMap: "30 60 60 180 0 0 0 0 0 0 0 0"
#KillTimeMap: " 5 5 5 15 60 240 720 1440 1440 1440 1440 1440"
# $Id: zyxel-2864,v 1.1.1.1 1998/10/12 20:47:48 root Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
#
# Permission to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
#
#
# Configuration for a ZyXEL 2864, 2864I, or Omni 288S in Class 2.0.
#
# This configuration file sets up the ZyXEL to run at 38.4 for
# both sending and receiving. RTS/CTS flow control is used on
# the tty port--you probably shouldn't use XON/XOFF. Note that
# on an SGI system the getty speed is the following non-standard
# gettydefs entry:
#
# dx_38400# B38400 # B38400 SANE TAB3 HUPCL #\r\n\n$HOSTNAME login: #dx_38400
#
#
CountryCode: 49
AreaCode: 521
FAXNumber: 3824122
LongDistancePrefix: 0
InternationalPrefix: 00
DialStringRules: etc/dialrules
ServerTracing: 0x08501
SessionTracing: 0x08501
RecvFileMode: 0640
LogFileMode: 0640
DeviceMode: 0660
RingsBeforeAnswer: 1
SpeakerVolume: off
GettyArgs: "-r -b %l"
LocalIdentifier: Medienlabor.
TagLineFormat: "From %%l|%c|Page %%p of %%t"
NoCarrierRetrys: 3
MaxRecvPages: 25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class2.0 # use class 2.0 interface
ModemRate: 38400 # 38.4 works fine
ModemFlowControl: rtscts # default
#
ModemNoFlowCmd: AT&H0 # disable flow control
ModemHardFlowCmd: AT&H3 # hardware flow control
ModemSoftFlowCmd: AT&H4 # software flow control
ModemSetupDTRCmd: AT&D2 # DTR off causes modem to hang up
ModemSetupDCDCmd: AT&C1 # DCD tracks carrier
#
ModemSetupAACmd: AT+FAA=1 # enable in current class
#
# Additional reset commands:
#
# &B1 DTE-DCE rate is fixed at DTE setting
# &N0 Auto-negotiate highest possible DCE-DCE link rate
# &S0 DSR always on
# *F0 Deny remote configuration
# (actually *F0 doesn't work in the firmware -- sigh)
# S18=4 Receive at 38400
# S38.3=1 DCD on/off sequence follows UNIX standard; also
# fix receiving baud rate at S18 value
#
ModemResetCmds: AT&B1&N0&S0S18=4S38.3=1
#
ModemDialCmd: ATDT%s # no '@' 'cuz then busy not recognized
NoCarrierRetrys: 3 # retry 3 times on no carrier
#
ModemSetVolumeCmd: "ATM0 ATM1L1 ATM1L3 ATM1L5 ATM1L7"
#
# Caller ID configuration setup.
#
#QualifyCID: etc/cid # CID access control list file
#CIDNumber: "CALLER NUMBER: " # pattern string for phone number info
#CIDName: "CALLER NAME: " # pattern string for identity info
#
PagerSetupCmds: AT&K0&N15 # use V.22 at 1200 bps (PageNet)
