Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] US robotics class2.0 modem error detected without successful handshake
I had lots of problems with a USRobotics 56k Fax Modem in Class2.0
You can try these things and see if it works any better:
1) Disable copy-quality since modem doesn't really support it very well.
MaxConsecutiveBadLines: 0
PercentGoodLines: 0
2) Disable adaptive-answering (handshaking problems with some fax
machines)
AdaptiveAnswer: No
ModemSetupAACmd: AT+FAA=0
3) Put a delay between the AT commands (problems with signal detect)
ModemATCmdDelay: 100
4) Put an X3 instead of X4 (problems with signal detect)
ModemResultCodesCmd: ATQ0X3
Although these changes made it work much better I continued to have
problems with some economical FAX telephones and so I decided to
configure the modem in Class1 by running faxaddmodem again and chosing
Class1. This seems to work much better !!
Simon Bridgwater
TC SISTEMA - Brescia
Italy
-----Original Message-----
From: Shailendra Mehta
Sent: Thu 1/10/2002 11:38 AM
To: hylafax (E-mail)
Cc:
Subject: [hylafax-users] US robotics class2.0 modem error
detected without successful handshake
Hi all,
I am using hylafax beta 3version on redhat 7.0.
I am using US robotics modem in class 2.0 modem.
I am not able to receive faxes on it it gives following error in log
file:
Jan 10 20:17:51.95: [ 375]: SESSION BEGIN 00000002 91832257464
Jan 10 20:17:51.95: [ 375]: <-- [4:ATA\r]
Jan 10 20:18:45.39: [ 375]: --> [10:NO CARRIER]
Jan 10 20:18:45.39: [ 375]: ANSWER: Ring detected without successful
handshake
Jan 10 20:18:45.39: [ 375]: SESSION END
Can anybody help me?
--Shailendra S. Mehta
Senior Engineer (Design & Development),
TATA Infotech Ltd,
Mapusa-GOA.
____________________ HylaFAX(tm) Users Mailing List
_______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null