Re: [hylafax-users] Multitech Missing EOL problem

[Sébastien ROZIER <sebastien.rozier@cybergaia.org>]

Thanx for the answer, what are differences between Class 1, Class 2, and
Class 2.0 ?
In the specs, Multitech MT5634ZPX-PCI.should be compliant with the three
standards.

I also heard about a parameter in the config file to set the trigger value
(flow control config ??). Could it help in my case ?
Thanx again

Sébastien

----- Original Message -----
From: "Lee Howard" <faxguy@server.deanox.com>
To: "Sébastien ROZIER" <sebastien.rozier@cybergaia.org>
Cc: <hylafax-users@hylafax.org>
Sent: Saturday, January 05, 2002 9:41 PM
Subject: Re: [hylafax-users] Multitech Missing EOL problem


> Quoting Sébastien ROZIER <sebastien.rozier@cybergaia.org>:
>
> > Hello,
> > I'm trying to use HylaFax 4.1 on a linux Slackware 8.0 Kernel 2.2.19
> > with a Multitech MT5634ZPX-PCI.
> > My configuration file is venus-mt-2.
> > I cannot receive faxes, the error message is always this (I masked the
> > phone numbers) :
> >
> > An attempt to receive facsimile on ttyS0 failed because:
> >
> >     Missing EOL after 5 seconds (section 3.2/T.4)
>
> These modems work very well with Class 1.  Re-run faxaddmodem and choose
Class
> 1.
>
> Lee
>
>




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null