[hylafax-users] Send Fax from WHFC problem

["Pagliari Dott. Daniele" <dpagliari@gpmprogress.it>]

Hi all!
I have installed a Hylafax version 4.1 (release 1rh7) for RH7.1 and it works
very  fine from the linux box (ie. I can send and receive fax with no
problem).
I can send fax from WHFC client only if it's already in postscript form or
tiff.
When I try to send a fax (ie. txt or doc document) from WHFC client using
APPLE LASERWRITER (but also with HP 4M Postscript printer and Adobe PS)
with Postscript properties set to maximum portability ADSC)  i hear the
modem dialing and handshaking with the fax but instead
of seeing the "SEND JOB" I get an ATH0 and then the session END. Here an
example of my send log:

nov 27 16:51:50.55: [ 1645]: SESSION BEGIN 00000004 521705661
nov 27 16:51:50.55: [ 1645]: HylaFAX (tm) Version 4.1
nov 27 16:51:50.55: [ 1645]: SEND FAX: JOB 7 DEST 00521705661 COMMID
00000004
nov 27 16:51:50.55: [ 1645]: DEVICE '/dev/ttyS0'
nov 27 16:51:50.55: [ 1645]: DELAY 75 ms
nov 27 16:51:50.62: [ 1645]: DELAY 2600 ms
nov 27 16:51:53.23: [ 1645]: <-- [4:ATZ\r]
nov 27 16:51:53.35: [ 1645]: --> [2:OK]
nov 27 16:51:53.35: [ 1645]: <-- [5:ATE0\r]
nov 27 16:51:53.36: [ 1645]: --> [4:ATE0]
nov 27 16:51:53.36: [ 1645]: --> [2:OK]
nov 27 16:51:53.36: [ 1645]: <-- [5:ATV1\r]
nov 27 16:51:53.37: [ 1645]: --> [2:OK]
nov 27 16:51:53.37: [ 1645]: <-- [5:ATQ0\r]
nov 27 16:51:53.38: [ 1645]: --> [2:OK]
nov 27 16:51:53.38: [ 1645]: <-- [7:ATS0=0\r]
nov 27 16:51:53.40: [ 1645]: --> [2:OK]
nov 27 16:51:53.40: [ 1645]: <-- [7:ATS8=2\r]
nov 27 16:51:53.42: [ 1645]: --> [2:OK]
nov 27 16:51:53.42: [ 1645]: <-- [8:ATS7=60\r]
nov 27 16:51:53.44: [ 1645]: --> [2:OK]
nov 27 16:51:53.44: [ 1645]: <-- [12:AT+FCLASS=1\r]
nov 27 16:51:53.46: [ 1645]: --> [2:OK]
nov 27 16:51:53.46: [ 1645]: <-- [7:ATL0M1\r]
nov 27 16:51:53.47: [ 1645]: --> [2:OK]
nov 27 16:51:53.48: [ 1645]: <-- [12:AT+FCLASS=1\r]
nov 27 16:51:53.59: [ 1645]: --> [2:OK]
nov 27 16:51:53.62: [ 1645]: DIAL 00521705661
nov 27 16:51:53.62: [ 1645]: <-- [16:ATDT00521705661\r]
nov 27 16:52:31.87: [ 1645]: --> [7:CONNECT]
nov 27 16:52:33.23: [ 1645]: --> [2:OK]
nov 27 16:52:33.23: [ 1645]: REMOTE NSF "50 80 00 E8 00 00 02 00 00 00 00 00
00 00 00 00 00 00 00 00 F2"
nov 27 16:52:33.23: [ 1645]: NSF remote fax equipment: unknown
nov 27 16:52:33.24: [ 1645]: <-- [9:AT+FRH=3\r]
nov 27 16:52:33.25: [ 1645]: --> [7:CONNECT]
nov 27 16:52:33.92: [ 1645]: --> [2:OK]
nov 27 16:52:33.92: [ 1645]: REMOTE CSI "0521 705661"
nov 27 16:52:33.92: [ 1645]: <-- [9:AT+FRH=3\r]
nov 27 16:52:33.94: [ 1645]: --> [7:CONNECT]
nov 27 16:52:34.16: [ 1645]: --> [2:OK]
nov 27 16:52:34.16: [ 1645]: REMOTE best rate 9600 bit/s
nov 27 16:52:34.16: [ 1645]: REMOTE max page width 1728 pixels in 215 mm
nov 27 16:52:34.16: [ 1645]: REMOTE max unlimited page length
nov 27 16:52:34.16: [ 1645]: REMOTE best vres 7.7 line/mm
nov 27 16:52:34.16: [ 1645]: REMOTE best format 2-D MR
nov 27 16:52:34.17: [ 1645]: REMOTE best 20 ms, 10 ms/scanline
nov 27 16:52:34.17: [ 1645]: USE 9600 bit/s
nov 27 16:52:34.17: [ 1645]: USE 20 ms, 10 ms/scanline
nov 27 16:52:34.17: [ 1645]: <-- [9:AT+FTH=3\r]
nov 27 16:52:34.22: [ 1645]: --> [7:CONNECT]
nov 27 16:52:34.22: [ 1645]: <-- data [3]
nov 27 16:52:34.22: [ 1645]: <-- data [2]
nov 27 16:52:35.53: [ 1645]: --> [2:OK]
nov 27 16:52:35.53: [ 1645]: <-- [5:ATH0\r]
nov 27 16:52:38.09: [ 1645]: --> [2:OK]
nov 27 16:52:38.10: [ 1645]: SESSION END

Thanks a lot

Daniele



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null