Re: [hylafax-users] Need help please

["Vyacheslav Frolov" <v.frolov@globalone.ru>]

BOURDAIS Patrick wrote:

> I come back with my problem.
> I force the transmit speed to 4800 Bps, but the same problem appears.
> The receiver SEND recv RTN (retrain negative) after the EOP. So hylafax
> resend the same page.
>
> Why does the receiver send me this signal RTN, what does it means?

Reseiver think that the page quality is toĻ bad.
The phone line is too noise or ... you have too old HylaFAX version.

> How can I turn around or ignore it to solve my problem ?

See RTNHandlingMethod in man hylafax-config.
See also man destctrls to set it per destination.

> Here is the log. Thank you to take the time to read it.
> Patrick
>
> ------ cut
> nov 15 21:53:38.28: [17100]: --> [22:+FDIS: 1,5,0,2,1,0,0,4]
> nov 15 21:53:38.28: [17100]: --> [2:OK]
> nov 15 21:53:38.28: [17100]: REMOTE best rate 14400 bit/s
> nov 15 21:53:38.28: [17100]: REMOTE max page width 1728 pixels in 215 mm
> nov 15 21:53:38.28: [17100]: REMOTE max unlimited page length
> nov 15 21:53:38.28: [17100]: REMOTE best vres 7.7 line/mm
> nov 15 21:53:38.28: [17100]: REMOTE best format 2-D MR
> nov 15 21:53:38.28: [17100]: REMOTE best 20 ms, 10 ms/scanline
> nov 15 21:53:38.28: [17100]: USE 4800 bit/s
> nov 15 21:53:38.28: [17100]: USE 20 ms, 10 ms/scanline
> nov 15 21:53:38.28: [17100]: SEND file "docq/doc662.ps;71"
> nov 15 21:53:38.30: [17100]: USE page width 1728 pixels in 215 mm
> nov 15 21:53:38.30: [17100]: USE unlimited page length
> nov 15 21:53:38.30: [17100]: USE 7.7 line/mm
> nov 15 21:53:38.30: [17100]: USE 2-D MR
> nov 15 21:53:38.31: [17100]: <-- [24:AT+FDIS=1,1,0,2,1,0,0,4\r]
> nov 15 21:53:38.55: [17100]: --> [2:OK]
> nov 15 21:53:38.55: [17100]: <-- [7:AT+FDT\r]
> nov 15 21:53:46.61: [17100]: --> [22:+FDCS: 1,1,0,2,1,0,0,3]
> nov 15 21:53:46.82: [17100]: --> [7:CONNECT]
> nov 15 21:53:46.82: [17100]: SEND wait for XON
> nov 15 21:53:46.82: [17100]: --> [1: ]
> nov 15 21:53:46.82: [17100]: SEND begin page
> nov 15 21:58:09.25: [17100]: SENT 159645 bytes of data
> nov 15 21:58:09.25: [17100]: SEND end page
> nov 15 21:58:18.47: [17100]: --> [2:OK]
> nov 15 21:58:18.47: [17100]: SEND send EOP (no more pages or documents)
> nov 15 21:58:18.47: [17100]: <-- [9:AT+FET=2\r]
> nov 15 21:58:21.85: [17100]: --> [8:+FPTS: 2]
> nov 15 21:58:21.96: [17100]: --> [2:OK]
> nov 15 21:58:21.96: [17100]: SEND recv RTN (retrain negative)
> nov 15 21:58:21.96: [17100]: <-- [24:AT+FDIS=1,0,0,2,1,0,0,4\r]
> nov 15 21:58:22.21: [17100]: --> [2:OK]
> nov 15 21:58:22.21: [17100]: <-- [7:AT+FDT\r]
> nov 15 21:58:30.76: [17100]: --> [22:+FDCS: 1,0,0,2,1,0,0,3]
> nov 15 21:58:30.97: [17100]: --> [7:CONNECT]
> nov 15 21:58:30.97: [17100]: SEND wait for XON
> nov 15 21:58:30.97: [17100]: --> [1: ]
> nov 15 21:58:30.97: [17100]: SEND begin page
> nov 15 22:07:14.25: [17100]: SENT 159645 bytes of data
> nov 15 22:07:14.25: [17100]: SEND end page
> nov 15 22:07:32.22: [17100]: --> [2:OK]
> nov 15 22:07:32.22: [17100]: SEND send EOP (no more pages or documents)
> nov 15 22:07:32.22: [17100]: <-- [9:AT+FET=2\r]
> nov 15 22:07:35.64: [17100]: --> [8:+FPTS: 2]
> nov 15 22:07:35.75: [17100]: --> [2:OK]
> nov 15 22:07:35.75: [17100]: SEND recv RTN (retrain negative)
> nov 15 22:07:35.75: [17100]: <-- [6:AT+FK\r]
> nov 15 22:07:41.33: [17100]: --> [9:+FHNG: 50]
> nov 15 22:07:41.33: [17100]: REMOTE HANGUP: Unspecified Transmit Phase D
> error, including +FPHCTO timeout between data and +FET command (code 50)
> nov 15 22:07:42.32: [17100]: --> [2:OK]
> nov 15 22:07:42.32: [17100]: SEND: Unable to transmit page(NAK at all
> possible signalling rates); Giving up after 3 attempts to send same page
> "docq/doc662.ps;71", dirnum 0
> nov 15 22:07:42.32: [17100]: <-- [5:ATH0\r]
> nov 15 22:07:42.57: [17100]: --> [2:OK]
> nov 15 22:07:42.58: [17100]: SESSION END



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null