[hylafax-users] [Fwd: facsimile not received]

[Chris Jones <c.jones@icm-group.com>]

Hi

HylaFax is working great for both incoming and outgoing faxes, but I
noticed that I get a few error mails such as the one below. Is there any
indication of what could be causing this?

Cheers,
--
Chris Jones
IT Department
ICM Group

-----Forwarded Message-----

> From: The HylaFAX Receive Agent <fax@ronin.icm-group.com>
> To: FaxMaster@ronin.icm-group.com
> Subject: facsimile not received
> Date: 12 Nov 2001 10:47:35 +0000
> 
> An attempt to receive facsimile on ttyS5 failed because:
> 
>     Normal and proper end of connection
> 
>     ---- Transcript of session follows ----
> 
> Nov 12 10:44:31.41: [  754]: SESSION BEGIN 00037385 4401273xxxxxx
> Nov 12 10:44:31.41: [  754]: <-- [4:ATA\r]
> Nov 12 10:44:45.76: [  754]: --> [4:+FCO]
> Nov 12 10:44:45.76: [  754]: ANSWER: FAX CONNECTION
> Nov 12 10:44:45.76: [  754]: RECV FAX: begin
> Nov 12 10:44:50.44: [  754]: --> [27:+FTI:"         01603xxxxxx"]
> Nov 12 10:44:50.44: [  754]: REMOTE TSI "01603xxxxxx"
> Nov 12 10:44:50.44: [  754]: --> [22:+FCS:0,0,0,2,0,0,0,5,0]
> Nov 12 10:44:50.44: [  754]: REMOTE wants 2400 bit/s
> Nov 12 10:44:50.44: [  754]: REMOTE wants page width 1728 pixels in 215 mm
> Nov 12 10:44:50.44: [  754]: REMOTE wants unlimited page length 
> Nov 12 10:44:50.44: [  754]: REMOTE wants 3.85 line/mm
> Nov 12 10:44:50.44: [  754]: REMOTE wants 1-D MR
> Nov 12 10:44:50.44: [  754]: --> [2:OK]
> Nov 12 10:44:50.44: [  754]: <-- [7:AT+FDR\r]
> Nov 12 10:44:54.80: [  754]: --> [7:CONNECT]
> Nov 12 10:44:54.80: [  754]: RECV: begin page
> Nov 12 10:44:54.80: [  754]: RECV: send trigger 022
> Nov 12 10:47:13.14: [  754]: RECV: 32693 bytes of data, 795 total lines
> Nov 12 10:47:30.95: [  754]: RECV: 2905 bytes of data, 871 total lines
> Nov 12 10:47:30.95: [  754]: --> [17:+FPS:2,39C,30,0,0]
> Nov 12 10:47:32.20: [  754]: --> [6:+FET:0]
> Nov 12 10:47:32.20: [  754]: RECV recv MPS (more pages, same document)
> Nov 12 10:47:32.20: [  754]: --> [5:ERROR]
> Nov 12 10:47:32.20: [  754]: MODEM Command error
> Nov 12 10:47:32.20: [  754]: RECV send RTN (retrain negative)
> Nov 12 10:47:32.20: [  754]: <-- [7:AT+FDR\r]
> Nov 12 10:47:35.28: [  754]: --> [7:+FHS:00]
> Nov 12 10:47:35.28: [  754]: REMOTE HANGUP: Normal and proper end of connection (code 0)
> Nov 12 10:47:35.28: [  754]: RECV FAX (00037385): recvq/fax16656.tif from 01603xxxxxx, route to <unspecified>, 0 pages in 2:50
> Nov 12 10:47:35.28: [  754]: RECV FAX: Normal and proper end of connection
> Nov 12 10:47:35.28: [  754]: RECV FAX (00037385): session with 01603xxxxxx terminated abnormally: Normal and proper end of connection
> Nov 12 10:47:35.28: [  754]: RECV FAX: bin/faxrcvd "recvq/fax16656.tif" "ttyS5" "00037385" "Normal and proper end of connection"
> 



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null