Re: [hylafax-users] Little question

[Kurt Greener <kgreener@styline.com>]

I had the same EOP error.  The end machine did receive the fax, 3 times.
When I was getting the error I was using a US Robotics modem.  I changed to
a MultiTech modem, and do not get the error.  I could easily test it because
the fax machine in my dept. was one that would produce the error.  I know
that may not be a solution, just sharing my experiences...

-----Original Message-----
From: procadas@creditus.pt [mailto:procadas@creditus.pt]
Sent: Friday, November 09, 2001 7:24 AM
To: hylafax-users@hylafax.org
Subject: [hylafax-users] Little question



Nov 08 15:16:53.38: [ 6891]: SEND send EOP (no more pages or documents)
Nov 08 15:16:53.38: [ 6891]: <-- [9:AT+FTH=3\r]
Nov 08 15:16:53.43: [ 6891]: --> [7:CONNECT]
Nov 08 15:16:54.75: [ 6891]: --> [2:OK]
Nov 08 15:16:54.75: [ 6891]: <-- [9:AT+FRH=3\r]
Nov 08 15:16:57.85: [ 6891]: --> [0:]
Nov 08 15:16:57.85: [ 6891]: MODEM <Empty line>
Nov 08 15:16:57.90: [ 6891]: --> [2:OK]
Nov 08 15:16:57.90: [ 6891]: SEND send EOP (no more pages or documents)
Nov 08 15:16:57.90: [ 6891]: <-- [9:AT+FTH=3\r]
Nov 08 15:16:57.95: [ 6891]: --> [7:CONNECT]
Nov 08 15:16:59.27: [ 6891]: --> [2:OK]
Nov 08 15:16:59.27: [ 6891]: <-- [9:AT+FRH=3\r]
Nov 08 15:17:02.37: [ 6891]: --> [0:]
Nov 08 15:17:02.37: [ 6891]: MODEM <Empty line>
Nov 08 15:17:02.42: [ 6891]: --> [2:OK]
Nov 08 15:17:02.42: [ 6891]: SEND send EOP (no more pages or documents)
Nov 08 15:17:02.42: [ 6891]: <-- [9:AT+FTH=3\r]
Nov 08 15:17:02.47: [ 6891]: --> [7:CONNECT]
Nov 08 15:17:03.79: [ 6891]: --> [2:OK]
Nov 08 15:17:03.79: [ 6891]: <-- [9:AT+FRH=3\r]
Nov 08 15:17:06.89: [ 6891]: --> [0:]
Nov 08 15:17:06.89: [ 6891]: MODEM <Empty line>
Nov 08 15:17:06.94: [ 6891]: --> [2:OK]
Nov 08 15:17:06.94: [ 6891]: No response to MPS or EOP repeated 3 tries
Nov 08 15:17:06.94: [ 6891]: <-- [9:AT+FTH=3\r]
Nov 08 15:17:06.99: [ 6891]: --> [7:CONNECT]
Nov 08 15:17:08.31: [ 6891]: --> [2:OK]
Nov 08 15:17:08.31: [ 6891]: <-- [5:ATH0\r]
Nov 08 15:17:10.24: [ 6891]: --> [2:OK]
Nov 08 15:17:10.24: [ 6891]: SESSION END

Hi. Guys, I remember read some posts about this but couldn't remember when.
To be short, The fax went ok but the remote machine doesn't understand EOP,
right? And that message MODEM <Empty line>, it's possible to coorect her,
right?

Pedro Roçadas (procadas@creditus.pt)
Dptº Informática,BPN-Créditus Technical Staff



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null