Re: [hylafax-users] HylaFAX & Zyxel Omni 56K

[Denis A Ustimenko <denis@oldham.ru>]

Hi!

On Thu, 8 Nov 2001, Miles K. Forrest wrote:

> I ran across your message on the HylaFAX mailing list.  Is your
> installation of HylaFAX working well?  I have a new Zyxel Omni 56K
> running at a client of mine, and they're experiencing a large percentage
> of failed receives.
>
> Did you/do you have many problems with your setup?
>
> Thanks for your time,
>
> Miles K. Forrest
> soon-to-be-loosing-my-hair-over-this :-)

The only problem is that sometimes modem goes wedged. The solution is
simple restart faxgetty. Now my cron do it. AFAIU it is a problem of
faxgetty but I have no time to debug now.
First of all I put the latest firmware (1.09) to modem. Here is my config:
....
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class2.0        # use class 2.0 interface
ModemRate:              38400           # 38.4 works fine
ModemFlowControl:       rtscts          # default
#
ModemNoFlowCmd:         AT&H0           # disable flow control
ModemHardFlowCmd:       AT&H3           # hardware flow control
ModemSoftFlowCmd:       AT&H4           # software flow control
ModemSetupDTRCmd:       AT&D2           # DTR off causes modem to hang up
ModemSetupDCDCmd:       AT&C1           # DCD tracks carrier
#
AdaptiveAnswer:         off
#ModemSetupAACmd:       AT+FAA=1        # enable in current class

#
# Additional reset commands:
#
# &B1     DTE-DCE rate is fixed at DTE setting
# &N0     Auto-negotiate highest possible DCE-DCE link rate
# &S0     DSR always on
# *F0     Deny remote configuration
#         (actually *F0 doesn't work in the firmware -- sigh)
# S18=4   Receive at 38400
# S38.3=1 DCD on/off sequence follows UNIX standard; also
#         fix receiving baud rate at S18 value
#
#ModemResetCmds:                AT&B1&N0&S0S18=4S38.3=1*p4s8=6
ModemResetCmds:         AT&B1s8=6*p3
#

#
# We don't want unlimited page length
# original Omni was: (0,1),(0-5),(0-2),(0-2),(0,1),(0),(0),(0-7)
#
# A4 length:
Class2DCCQueryCmd:      !(0,1),(0-5),(0-2),(0),(0,1),(0),(0),(0-7)
#
# A4 length, limit speed <= 9600:
#Class2DCCQueryCmd:      !(0,1),(0-3),(0-2),(0),(0,1),(0),(0),(0-7)
#
# A4,B4 length:
#
#Class2DCCQueryCmd:     !(0,1),(0-5),(0-2),(0,1),(0,1),(0),(0),(0-7)
#

NoCarrierRetrys:        3               # retry 3 times on no carrier
#
ModemSetVolumeCmd:      "ATM0 ATM1L1 ATM1L3 ATM1L5 ATM1L7"
--------------------------------------

Denis




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null