[hylafax-users] RSPREC error/got DCN

Hi!
When I set my modem IDC-2814BXL+ in Class 1, I can't receive fax.

Nov 05 13:58:28.95: [18990]: SESSION BEGIN 00000980 380444903745
Nov 05 13:58:28.95: [18990]: <-- [4:ATA\r]
Nov 05 13:58:35.75: [18990]: --> [7:CONNECT]
Nov 05 13:58:35.75: [18990]: ANSWER: FAX CONNECTION
Nov 05 13:58:35.75: [18990]: RECV FAX: begin
Nov 05 13:58:35.75: [18990]: <-- data [23]
Nov 05 13:58:35.75: [18990]: <-- data [2]
Nov 05 13:58:36.61: [18990]: --> [7:CONNECT]
Nov 05 13:58:36.61: [18990]: <-- data [10]
Nov 05 13:58:36.61: [18990]: <-- data [2]
Nov 05 13:58:37.09: [18990]: --> [2:OK]
Nov 05 13:58:37.09: [18990]: <-- [9:AT+FRH=3\r]
Nov 05 13:58:40.20: [18990]: --> [0:]
Nov 05 13:58:40.20: [18990]: MODEM <Empty line>
Nov 05 13:58:40.20: [18990]: <-- data [1]
Nov 05 13:58:40.21: [18990]: --> [2:OK]
Nov 05 13:58:40.21: [18990]: DELAY 1500 ms
Nov 05 13:58:41.72: [18990]: <-- [9:AT+FTH=3\r]
Nov 05 13:58:42.77: [18990]: --> [7:CONNECT]
Nov 05 13:58:42.77: [18990]: <-- data [23]
Nov 05 13:58:42.77: [18990]: <-- data [2]
Nov 05 13:58:43.61: [18990]: --> [7:CONNECT]
Nov 05 13:58:43.61: [18990]: <-- data [10]
Nov 05 13:58:43.61: [18990]: <-- data [2]
Nov 05 13:58:44.09: [18990]: --> [2:OK]
Nov 05 13:58:44.09: [18990]: <-- [9:AT+FRH=3\r]
Nov 05 13:58:44.61: [18990]: --> [7:CONNECT]
Nov 05 13:58:46.01: [18990]: --> [2:OK]
Nov 05 13:58:46.01: [18990]: REMOTE wants 9600 bit/s
Nov 05 13:58:46.01: [18990]: REMOTE wants page width 1728 pixels in 215 mm
Nov 05 13:58:46.01: [18990]: REMOTE wants unlimited page length
Nov 05 13:58:46.01: [18990]: REMOTE wants 3.85 line/mm
Nov 05 13:58:46.01: [18990]: REMOTE wants 2-D MR
Nov 05 13:58:46.01: [18990]: RECV training at v.29 9600 bit/s
Nov 05 13:58:46.01: [18990]: <-- [10:AT+FRM=96\r]
Nov 05 13:58:46.57: [18990]: --> [7:CONNECT]
Nov 05 13:58:48.17: [18990]: RECV: TCF 39 bytes, 0% non-zero, 0 zero-run
Nov 05 13:58:48.17: [18990]: RECV: reject TCF (zero run too short, min 1200)
Nov 05 13:58:48.17: [18990]: --> [10:NO CARRIER]
Nov 05 13:58:48.17: [18990]: DELAY 75 ms
Nov 05 13:58:48.27: [18990]: <-- [9:AT+FTH=3\r]
Nov 05 13:58:49.25: [18990]: --> [7:CONNECT]
Nov 05 13:58:49.25: [18990]: <-- data [3]
Nov 05 13:58:49.25: [18990]: <-- data [2]
Nov 05 13:58:49.57: [18990]: --> [2:OK]
Nov 05 13:58:49.57: [18990]: TRAINING failed
Nov 05 13:58:49.57: [18990]: <-- [9:AT+FRH=3\r]
Nov 05 13:58:50.09: [18990]: --> [7:CONNECT]
Nov 05 13:58:51.49: [18990]: --> [2:OK]
Nov 05 13:58:51.49: [18990]: REMOTE wants 7200 bit/s
Nov 05 13:58:51.49: [18990]: REMOTE wants page width 1728 pixels in 215 mm
Nov 05 13:58:51.49: [18990]: REMOTE wants unlimited page length
Nov 05 13:58:51.49: [18990]: REMOTE wants 3.85 line/mm
Nov 05 13:58:51.49: [18990]: REMOTE wants 2-D MR
Nov 05 13:58:51.49: [18990]: RECV training at v.29 7200 bit/s
Nov 05 13:58:51.49: [18990]: <-- [10:AT+FRM=72\r]
Nov 05 13:58:52.05: [18990]: --> [7:CONNECT]
Nov 05 13:58:53.57: [18990]: RECV: TCF 28 bytes, 0% non-zero, 0 zero-run
Nov 05 13:58:53.57: [18990]: RECV: reject TCF (zero run too short, min 900)
Nov 05 13:58:53.61: [18990]: --> [10:NO CARRIER]
Nov 05 13:58:53.61: [18990]: DELAY 75 ms
Nov 05 13:58:53.70: [18990]: <-- [9:AT+FTH=3\r]
Nov 05 13:58:54.65: [18990]: --> [7:CONNECT]
Nov 05 13:58:54.65: [18990]: <-- data [3]
Nov 05 13:58:54.65: [18990]: <-- data [2]
Nov 05 13:58:54.93: [18990]: --> [2:OK]
Nov 05 13:58:54.93: [18990]: TRAINING failed
Nov 05 13:58:54.93: [18990]: <-- [9:AT+FRH=3\r]
Nov 05 13:58:55.45: [18990]: --> [7:CONNECT]
Nov 05 13:58:56.89: [18990]: --> [2:OK]
Nov 05 13:58:56.89: [18990]: REMOTE wants 4800 bit/s
Nov 05 13:58:56.89: [18990]: REMOTE wants page width 1728 pixels in 215 mm
Nov 05 13:58:56.89: [18990]: REMOTE wants unlimited page length
Nov 05 13:58:56.89: [18990]: REMOTE wants 3.85 line/mm
Nov 05 13:58:56.89: [18990]: REMOTE wants 2-D MR
Nov 05 13:58:56.89: [18990]: RECV training at v.27ter 4800 bit/s
Nov 05 13:58:56.89: [18990]: <-- [10:AT+FRM=48\r]
Nov 05 13:58:58.01: [18990]: --> [7:CONNECT]
Nov 05 13:58:59.77: [18990]: RECV: TCF 1083 bytes, 15% non-zero, 910 zero-run
Nov 05 13:58:59.77: [18990]: RECV: reject TCF (too many non-zero, max 10%)
Nov 05 13:58:59.77: [18990]: --> [10:NO CARRIER]
Nov 05 13:58:59.77: [18990]: DELAY 75 ms
Nov 05 13:58:59.86: [18990]: <-- [9:AT+FTH=3\r]
Nov 05 13:59:00.85: [18990]: --> [7:CONNECT]
Nov 05 13:59:00.85: [18990]: <-- data [3]
Nov 05 13:59:00.85: [18990]: <-- data [2]
Nov 05 13:59:01.17: [18990]: --> [2:OK]
Nov 05 13:59:01.17: [18990]: TRAINING failed
Nov 05 13:59:01.17: [18990]: <-- [9:AT+FRH=3\r]
Nov 05 13:59:01.65: [18990]: --> [7:CONNECT]
Nov 05 13:59:03.05: [18990]: --> [2:OK]
Nov 05 13:59:03.05: [18990]: REMOTE wants 2400 bit/s
Nov 05 13:59:03.05: [18990]: REMOTE wants page width 1728 pixels in 215 mm
Nov 05 13:59:03.05: [18990]: REMOTE wants unlimited page length
Nov 05 13:59:03.05: [18990]: REMOTE wants 3.85 line/mm
Nov 05 13:59:03.05: [18990]: REMOTE wants 2-D MR
Nov 05 13:59:03.05: [18990]: RECV training at v.27ter fallback mode 2400 bit/s
Nov 05 13:59:03.05: [18990]: <-- [10:AT+FRM=24\r]
Nov 05 13:59:04.37: [18990]: --> [7:CONNECT]
Nov 05 13:59:06.29: [18990]: RECV: TCF 113 bytes, 13% non-zero, 1 zero-run
Nov 05 13:59:06.29: [18990]: RECV: reject TCF (too many non-zero, max 10%)
Nov 05 13:59:06.29: [18990]: RECV: reject TCF (zero run too short, min 300)
Nov 05 13:59:06.29: [18990]: --> [10:NO CARRIER]
Nov 05 13:59:06.29: [18990]: DELAY 75 ms
Nov 05 13:59:06.38: [18990]: <-- [9:AT+FTH=3\r]
Nov 05 13:59:07.37: [18990]: --> [7:CONNECT]
Nov 05 13:59:07.37: [18990]: <-- data [3]
Nov 05 13:59:07.37: [18990]: <-- data [2]
Nov 05 13:59:07.69: [18990]: --> [2:OK]
Nov 05 13:59:07.69: [18990]: TRAINING failed
Nov 05 13:59:07.69: [18990]: <-- [9:AT+FRH=3\r]
Nov 05 13:59:08.17: [18990]: --> [7:CONNECT]
Nov 05 13:59:09.45: [18990]: --> [2:OK]
Nov 05 13:59:09.45: [18990]: DELAY 1500 ms
Nov 05 13:59:10.96: [18990]: <-- [9:AT+FTH=3\r]
Nov 05 13:59:11.97: [18990]: --> [7:CONNECT]
Nov 05 13:59:11.97: [18990]: <-- data [23]
Nov 05 13:59:11.97: [18990]: <-- data [2]
Nov 05 13:59:12.81: [18990]: --> [7:CONNECT]
Nov 05 13:59:12.81: [18990]: <-- data [10]
Nov 05 13:59:12.81: [18990]: <-- data [2]
Nov 05 13:59:13.29: [18990]: --> [2:OK]
Nov 05 13:59:13.29: [18990]: <-- [9:AT+FRH=3\r]
Nov 05 13:59:16.40: [18990]: --> [0:]
Nov 05 13:59:16.40: [18990]: MODEM <Empty line>
Nov 05 13:59:16.40: [18990]: <-- data [1]
Nov 05 13:59:16.41: [18990]: --> [2:OK]
Nov 05 13:59:16.41: [18990]: RECV FAX: RSPREC error/got DCN
Nov 05 13:59:16.43: [18990]: RECV FAX: end
Nov 05 13:59:16.43: [18990]: SESSION END

Thanks.
Litvin Alexandr.