Re: [hylafax-users] Error [5:none\r] -> MODEM TIMEOUT: reading line from modem

[Lee Howard <faxguy@deanox.com>]

At 10:29 PM 10/31/01 +0800, graham@dd-industries.com wrote:

>In my config.ttyS0 file there _was_ a line that caused the following error 
>message in my /var/log/messages file:
>
>Oct 31 11:31:47 ddi02 FaxGetty[5222]: <-- [5:none\r]
>Oct 31 11:32:17 ddi02 FaxGetty[5222]: MODEM TIMEOUT: reading line from modem
>
>My modem is a USR 56K FAX.  It doesn't understand the command "none".  I
doubt 
>any modem on earth understands this command.   :)

You are correct.  No modem on earth will likely recognize "none".  But,
faxsend in HylaFAX 4.1rc1 and later does.  So, you appear to be using a
default config file from 4.1 with a prior HylaFAX release.  Not a HylaFAX
problem.

>After doing some research on the net (google.com search), I changed it to:
>
>
>#
># +FAP=? not supported on this modem, gives ERROR in ServerTracing
>#
>Class2APQueryCmd:      ""
>
>And the error went away.

Oh, but turn up your ServerTracing level to 0xFFF and then take a look at
it.  You'll see that the ERROR did not go away.

Lee.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null